[Bug 281218] Quectel LTE MODEM not working anymore

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=281218

--- Comment #6 from freebsd@jjabba.com ---
Here is my dmesg output from a the system (sim card currently unplugged)
```
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p3 stable/24.7-n267802-bc5627fc5f3 SMP amd64
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git
llvmorg-18.1.5-0-g617a15a9eac9)
VT(vga): resolution 640x480
CPU: AMD GX-412TC SOC                                (998.16-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
 
Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD
Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I>
  Structured Extended Features=0x8<BMI1>
  XSAVE Features=0x1<XSAVEOPT>
  SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 4084932608 (3895 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <COREv4 COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 2 1 3
random: entropy device external interface
wlan: mac acl policy registered
kbd0 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf29e0-0xf29fe
smbios0: Version: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <COREv4 COREBOOT>
acpi0: Power Button (fixed)
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
apei0: <ACPI Platform Error Interface> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 24 at device 2.1 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) I210 (Fiber)> port 0x2000-0x201f mem
0xd0000000-0xd00fffff,0xd0200000-0xd0203fff irq 24 at device 0.0 on pci1
igb0: EEPROM V3.25-0 eTrack 0x800005d5
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: 00:0d:b9:63:2a:28
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib2: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0
pcib2: failed to allocate initial I/O port window: 0x2000-0x2fff
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0x3000-0x301f mem
0xd0300000-0xd031ffff,0xd0320000-0xd0323fff irq 28 at device 0.0 on pci2
igb1: NVM V0.6 imgtype1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: 00:0d:b9:63:2a:29
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0
pcib3: failed to allocate initial I/O port window: 0x3000-0x3fff
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0x4000-0x401f mem
0xd0400000-0xd041ffff,0xd0420000-0xd0423fff irq 32 at device 0.0 on pci3
igb2: NVM V0.6 imgtype1
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
igb2: Ethernet address: 00:0d:b9:63:2a:2a
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0
pcib4: failed to allocate initial I/O port window: 0x4000-0x4fff
pci4: <ACPI PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0x6000-0x601f mem
0xd0500000-0xd051ffff,0xd0520000-0xd0523fff irq 36 at device 0.0 on pci4
igb3: NVM V0.6 imgtype1
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
igb3: Ethernet address: 00:0d:b9:63:2a:2b
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
pci0: <encrypt/decrypt> at device 8.0 (no driver attached)
xhci0: <AMD FCH USB 3.0 controller> mem 0xd0822000-0xd0823fff irq 18 at device
16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD Hudson-2 AHCI SATA controller> port
0x5010-0x5017,0x5020-0x5023,0x5018-0x501f,0x5024-0x5027,0x5000-0x500f mem
0xd0825000-0xd08253ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ehci0: <AMD FCH USB 2.0 controller> mem 0xd0826000-0xd08260ff irq 18 at device
18.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ehci1: <AMD FCH USB 2.0 controller> mem 0xd0827000-0xd08270ff irq 18 at device
19.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
sdhci_pci0: <Generic SD HCI> mem 0xd0828000-0xd08280ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC" frequency 998128185 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen2.1: <AMD EHCI root HUB> at usbus2
ugen1.1: <AMD EHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2 on usbus2
uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <YSE128GTLCW-SBC-2 SBFM61.5> ACS-4 ATA SATA 3.x device
ada0: Serial Number 511230621109001052
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on
usbus1
ugen2.2: <vendor 0x0438 product 0x7900> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on
usbus2
uhub3: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
ugen2.3: <SimTech, Incorporated SimTech, Incorporated> at usbus2
u3g0 on uhub4
u3g0: <SimTech, Incorporated SimTech, Incorporated, class 0/0, rev 2.00/3.18,
addr 3> on usbus2
u3g0: Found 6 ports.
igb0: link state changed to UP
igb1: link state changed to UP
igb2: link state changed to UP
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
lo0: link state changed to UP
pflog0: permanently promiscuous mode enabled
igb2: link state changed to DOWN
wg0: link state changed to UP
igb1: link state changed to DOWN
igb0: link state changed to DOWN
igb0: link state changed to UP
igb2: link state changed to UP
igb1: link state changed to UP
```

-- 
You are receiving this mail because:
You are the assignee for the bug.