[Bug 277062] FreeBSD 14.0-RELEASE installer unable to install on HPE ProLiant DL385 Gen10v2
Date: Thu, 15 Feb 2024 13:47:16 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=277062 --- Comment #10 from Arrigo Triulzi <arrigo@alchemistowl.org> --- (In reply to Michael Osipov from comment #8) While I can see your reasoning, I think there is a deeper problem with the USB emulation which the iLO provides and FreeBSD's kernel… my dmesg is full of: usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT ugen0.2: <Unknown > at usbus0 (disconnected) uhub_reattach_port: could not allocate new device usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 2 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored) and the console keyboard does not work… methinks this is something on the HPE side which breaks with new(er) FreeBSD kernels. -- You are receiving this mail because: You are the assignee for the bug.