Re: fdt based rework Re: Raspbery Pi support (release notes/wiki page) update?

As you saw, the rp1 driver is compiled into the specific U-Boot version that I used and the devicetree is handed over to the fbsd-kernel... 
Or let's say: a hacked u-boot could currently be considered operational (except currently USB)... 
but of course freebsd is not ready for use yet...
I'm afraid we need an rp1.c driver...
The original is available here:
https://github.com/raspberrypi/linux/blob/rpi-6.6.y/drivers/mfd/rp1.c


but as long as no fbsd developer comes forward who wants/can work on it, we don't need to talk about it any further or we have to do it ourselves.. but huh, not that easy and not for everyone

Regards

K.

> Am 09.02.2025 um 18:18 schrieb Mark Millard <marklmi@yahoo.com>:
> …
> ..
> 
> FYI: The U-Boot fdt print output is sufficient to essentially
> reproduce the live DTB with: It is a complete source and has
> vastly bigger output to capture. With a dtc that follows the
> same conventions, it can be compiled to produce such a .dtb
> file.
> …..
...
> 
> ===
> Mark Millard
> marklmi at yahoo.com