Re: FreeBSD OS installation stuck after selecting Boot installer
Date: Thu, 27 Jun 2024 00:55:15 UTC
On Jun 26, 2024, at 17:33, Anantharam, Arjun <arjun.anantharam@intel.com> wrote:
> Here is the log with "set efi.rt.disabled=1" and FreeBSD-14.1-RELEASE-arm64-aarch64-memstick.img.
> Any reason why the mount "Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19" error occurs even with disk0p2: FreeBSD UFS showing up with lsdev and the eventaul kernel panic?
> Do you think this is an issue specific to ARM or FreeBSD ?
>
> Please feel free to let me know if thee are other options to try..
>
>
> ______ ____ _____ _____
> | ____| | _ \ / ____| __ \
> | |___ _ __ ___ ___ | |_) | (___ | | | |
> | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> | | | | | __/ __/| |_) |____) | |__| |
> | | | | | | || | | |
> |_| |_| \___|\___||____/|_____/|_____/ ``` `
> s` `.....---.......--.``` -/
> /---------- Welcome to FreeBSD -----------\ +o .--` /y:` +.
> | | yo`:. :o `+-
> | 1. Boot Installer [Enter] | y/ -/` -o/
> | 2. Boot Single user | .- ::/sy+:.
> | 3. Escape to loader prompt | / `-- /
> | 4. Reboot | `: :`
> | 5. Cons: Serial | `: :`
> | | / /
> | Options: | .- -.
> | 6. Kernel: default/kernel (1 of 1) | -- -.
> | 7. Boot Options | `:` `:`
> | | .-- `--.
> | | .---.....----.
> \-----------------------------------------/
>
>
> Exiting menu!
>
>
> Type '?' for a list of commands, 'help' for more detailed help.
>
> OK set hw.uart.console="mm:0x2058400000,rs:2"
> OK set efi.rt.disabled=1
>
> OK lsdev
> disk devices:
> disk0: 4194304 X 512 blocks
> disk0p1: EFI
> disk0p2: FreeBSD UFS
> http: (unknown)
> net devices:
> net0:
> net1:
> net2:
> net3:
>
> OK show
> COLUMNS=80
> LINES=50
> acpi.oem=INTEL
> acpi.revision=2
> acpi.rsdp=0x00000047716f0018
> acpi.rsdt=0x0000000000000000
> acpi.xsdt=0x00000047716ffe98
> acpi.xsdt_length=36
> acpi_dsdt_load=NO
> acpi_dsdt_name=/boot/acpi_dsdt.aml
> acpi_dsdt_type=acpi_dsdt
> acpi_video_load=NO
> audit_event_load=NO
> audit_event_name=/etc/security/audit_event
> audit_event_type=etc_security_audit_event
> autoboot_delay=NO
> bitmap_load=NO
> bitmap_name=splash.bmp
> bitmap_type=splash_image_data
> boot_serial=YES
> bootenv_autolist=YES
> bootfile=kernel
> console=efi
> cpu_microcode_load=NO
> cpu_microcode_name=/boot/firmware/ucode.bin
> cpu_microcode_type=cpu_microcode
> currdev=disk0p2:
> efi-version=2.70
> efi.rt.disabled=1
> efi_com_port=0
> efi_com_speed=115200
> efi_max_resolution=1x1
> entropy_cache_load=YES
> entropy_cache_name=/boot/entropy
> entropy_cache_type=boot_entropy_cache
> entropy_efi_seed=YES
> hint.acpi.0.disabled=0
> hint.smbios.0.mem=0x4776890000
> hostuuid_load=YES
> hostuuid_name=/etc/hostid
> hostuuid_type=hostuuid
> hw.uart.console=mm:0x2058400000,rs:2
> interpret=OK
> kernel=kernel
> kernel_options=
> kernels_autodetect=NO
> loaddev=disk0p2:
> loader.efi=1
> loader_conf_dirs=/boot/loader.conf.d
> loader_menu_multi_user_prompt=Installer
> local_loader_conf_files=/boot/loader.conf.local
> module_blacklist=drm drm2 radeonkms i915kms amdgpu
> module_path=/boot/modules;/boot/dtb;/boot/dtb/overlays
> module_verbose=2
> nextboot_conf=/boot/nextboot.conf
> prompt=${interpret}
> ram_blacklist_load=NO
> ram_blacklist_name=/boot/blacklist.txt
> ram_blacklist_type=ram_blacklist
> screensave_load=NO
> screensave_name=green_saver
> script.lang=lua
> smbios.bios.reldate=Apr 4 2024
> smbios.bios.revision=1.2
> smbios.bios.vendor=Intel
> smbios.bios.version=Intel(R) IPU Embedded UEFI FW 1.2.0 for AArch64
> smbios.chassis.maker=Intel
> smbios.chassis.serial=N/A
> smbios.chassis.tag=N/A
> smbios.chassis.type=Other
> smbios.chassis.version=N/A
> smbios.memory.enabled=14680064
> smbios.socket.enabled=16
> smbios.socket.populated=16
> smbios.system.family=Intel(R) IPU E2100
> smbios.system.maker=Intel
> smbios.system.product=Intel(R) IPU Adapter E2100-CCQDA2
> smbios.system.serial=000000
> smbios.system.sku=000000000000
> smbios.system.uuid=30313245-3030-3030-6e0c-56812e49f70f
> smbios.system.version=N/A
> smbios.version=3.3
> splash_bmp_load=NO
> splash_pcx_load=NO
> splash_txt_load=NO
> twiddle_divisor=16
> verbose_loading=NO
> vesa_load=NO
> vfs.mountroot.timeout=10
> OK boot
> Loading kernel...
> /boot/kernel/kernel text=0x2a8 text=0x9db150 text=0x260994 data=0x150cb8 data=0x
> 0+0x2bc000 0x8+0x1516b0+0x8+0x17a5c2/
> Loading configured modules...
> can't find '/etc/hostid'
> can't find '/boot/entropy'
> No valid device tree blob found!
> WARNING! Trying to fire up the kernel, but no device tree blob found!
> ---<<BOOT>>---
> Copyright (c) 1992-2023 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC arm64
> FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
> VT: init without driver.
> module scmi already present!
> real memory = 15586795520 (14864 MB)
> avail memory = 15167205376 (14464 MB)
> Starting CPU 1 (10000)
> Starting CPU 2 (20000)
> Starting CPU 3 (30000)
> Starting CPU 4 (40000)
> Starting CPU 5 (50000)
> Starting CPU 6 (60000)
> Starting CPU 7 (70000)
> Starting CPU 8 (80000)
> Starting CPU 9 (90000)
> Starting CPU 10 (a0000)
> Starting CPU 11 (b0000)
> Starting CPU 12 (c0000)
> Starting CPU 13 (d0000)
> Starting CPU 14 (e0000)
> Starting CPU 15 (f0000)
> FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
> arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
> random: entropy device external interface
> ACPI: IORT: Unused ITS block, ID 1
> kbd0 at kbdmux0
> acpi0: <INTEL MEVB100>
> acpi0: Power Button (fixed)
> acpi0: Sleep Button (fixed)
> acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
> psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
> gic0: <ARM Generic Interrupt Controller v3.0> iomem 0x205a000000-0x205a00ffff,0x205a080000-0x205a27ffff on acpi0
> its0: <ARM GIC Interrupt Translation Service> mem 0x205a040000-0x205a05ffff on gic0
> generic_timer0: <ARM Generic Timer> irq 23,24,25 on acpi0
> Timecounter "ARM MPCore Timecounter" frequency 112500000 Hz quality 1000
> Event timer "ARM MPCore Eventtimer" frequency 112500000 Hz quality 1000
> pmu0: <Performance Monitoring Unit> on acpi0
> acpi_ged0: <Generic Event Device> irq 16 on acpi0
> acpi_ged0: Raw IRQ 257
> acpi_button0: <Power Button> on acpi0
> pcib0: <Generic PCI host controller> on acpi0
> pci0: <PCI bus> on pcib0
> pci0: <network, ethernet> at device 1.0 (no driver attached)
> nvme0: <Generic NVMe Device> mem 0x2220000000-0x2221ffffff,0x2226c80000-0x2226c9ffff at device 1.1 on pci0
> nvme0: unable to allocate MSI-X
> pci0: <unknown> at device 1.2 (no driver attached)
> pci0: <encrypt/decrypt, network/computer crypto> at device 1.3 (no driver attached)
> pci0: <unknown> at device 1.4 (no driver attached)
> pci0: <network, ethernet> at device 1.6 (no driver attached)
> pci0: <mass storage, NVM> at device 1.7 (no driver attached)
> cpu0: <ACPI CPU> on acpi0
> armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
> Timecounters tick every 1.000 msec
> usb_needs_explore_all: no devclass
> CPU 0: ARM Neoverse-N1 r4p0 affinity: 0 0 0
> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG,IDC,DIC>
> Instruction Set Attributes 0 = <DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL>
> Instruction Set Attributes 1 = <RCPC-8.3,DCPoP>
> Instruction Set Attributes 2 = <>
> Processor Features 0 = <CSV3,CSV2,RAS,GIC,AdvSIMD+HP,FP+HP,EL3,EL2,EL1,EL0 32>
> Processor Features 1 = <PSTATE.SSBS MSR>
> Memory Model Features 0 = <TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit ASID,256TB PA>
> Memory Model Features 1 = <XNX,PAN+ATS1E1,LO,HPD+TTPBHA,VH,16bit VMID,HAF+DS>
> Memory Model Features 2 = <EVT-8.2,32bit CCIDX,48bit VA,IESB,UAO,CnP>
> Debug Features 0 = <DoubleLock,SPE,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3p1,Debugv8p2>
> Debug Features 1 = <>
> Auxiliary Features 0 = <>
> Auxiliary Features 1 = <>
> AArch32 Instruction Set Attributes 5 = <RDM,CRC32,SHA2,SHA1,AES+VMULL,SEVL>
> AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
> AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP Arith,SIMDHP Arith,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
> CPU 1: ARM Neoverse-N1 r4p0 affinity: 1 0 0
> CPU 2: ARM Neoverse-N1 r4p0 affinity: 2 0 0
> CPU 3: ARM Neoverse-N1 r4p0 affinity: 3 0 0
> CPU 4: ARM Neoverse-N1 r4p0 affinity: 4 0 0
> CPU 5: ARM Neoverse-N1 r4p0 affinity: 5 0 0
> CPU 6: ARM Neoverse-N1 r4p0 affinity: 6 0 0
> CPU 7: ARM Neoverse-N1 r4p0 affinity: 7 0 0
> CPU 8: ARM Neoverse-N1 r4p0 affinity: 8 0 0
> CPU 9: ARM Neoverse-N1 r4p0 affinity: 9 0 0
> CPU 10: ARM Neoverse-N1 r4p0 affinity: 10 0 0
> CPU 11: ARM Neoverse-N1 r4p0 affinity: 11 0 0
> CPU 12: ARM Neoverse-N1 r4p0 affinity: 12 0 0
> CPU 13: ARM Neoverse-N1 r4p0 affinity: 13 0 0
> CPU 14: ARM Neoverse-N1 r4p0 affinity: 14 0 0
> CPU 15: ARM Neoverse-N1 r4p0 affinity: 15 0 0
> Release APs...done
> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
> TCP_ratelimit: Is now initialized
> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
>
> Loader variables:
> vfs.root.mountfrom=ufs:/dev/ufs/FreeBSD_Install
> vfs.root.mountfrom.options=ro,noatime
>
> Manual root filesystem specification:
> <fstype>:<device> [options]
> Mount <device> using filesystem <fstype>
> and with the specified (optional) option list.
>
> eg. ufs:/dev/da0s1a
> zfs:zroot/ROOT/default
> cd9660:/dev/cd0 ro
> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>
> ? List valid disk boot devices
> . Yield 1 second (for background tasks)
> <empty line> Abort manual input
>
> mountroot>
Did you intend a "?" above (to show the vaild disk boot
devices as seen at this point)?
> mountroot> random: unblocking device.
>
> panic: mountroot: unable to (re-)mount root.
> cpuid = 14
> time = 99
> KDB: stack backtrace:
> #0 0xffff000000525d3c at kdb_backtrace+0x58
> #1 0xffff0000004d0d40 at vpanic+0x198
> #2 0xffff0000004d0ba4 at panic+0x44
> #3 0xffff0000005cf82c at vfs_mountroot+0x1df4
> #4 0xffff000000442814 at start_init+0x28
> #5 0xffff00000047cdf0 at fork_exit+0x88
> #6 0xffff0000008b61f4 at fork_trampoline+0x14
> Uptime: 1m39s
> Automatic reboot in 15 seconds - press a key on the console to abort
My memory is that typing just return to such a mountroot> prompt normally
panics in my example contexts.
*HISTORY DELETED*
===
Mark Millard
marklmi at yahoo.com