Re: USB-serial adapter suggestions needed
- Reply: Mark Millard : "Re: USB-serial adapter suggestions needed"
- In reply to: Mark Millard : "Re: USB-serial adapter suggestions needed"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Fri, 12 Jan 2024 17:25:52 UTC
On Tue, Jan 09, 2024 at 05:03:42PM -0800, Mark Millard wrote: > > www.zefox.org is the aarch64 that is not configured in config.txt > in the normal aarch64 manor. As I've requested before, please test > using a config.txt that instead has: > > QUOTE > [all] > arm_64bit=1 > dtparam=audio=on,i2c_arm=on,spi=on > dtoverlay=mmc > dtoverlay=disable-bt > device_tree_address=0x4000 > kernel=u-boot.bin > > [pi4] > hdmi_safe=1 > armstub=armstub8-gic.bin > > # Local addition: > [all] > force_mac_address=b8:27:eb:71:46:4f > END QUOTE > > Please do not use a configuration based in part on armv7 FreeBSD > config.txt material any more for the testing activity: Just use > the FreeBSD normal aarch64 configuration with the force_mac_address > related material added at the end. > Just tried it now. The boot seems _extremely_ slow and invited at least some intervention (manually typing run bootcmd_usb0 at the u-boot prompt) but it did come up multi-user. It is able to function as a terminal server to nemesis.zefox.com, so I'll just watch it for a while. The netmap has been updated to reflect the change to config.txt. An aside, none of the seven hosts has dropped a tip session over the past day or so, except when taken down intentionally. > I want to know if this also fails when powerd is not in > use anywhere. > For now powerd is off on all FreeBSD hosts, the Pi4 workstation is running something called upowerd as always. I'm thinking to eventualy re-start powerd on only a subset of hosts in hope that will make behavioral differences more obvious. Thanks for your help! bob prohaska