From nobody Fri Feb 23 19:51:54 2024 X-Original-To: freebsd-arm@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4ThLHt2r06z5BPh3 for ; Fri, 23 Feb 2024 19:51:54 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from mxrelay.nyi.freebsd.org (mxrelay.nyi.freebsd.org [IPv6:2610:1c1:1:606c::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.nyi.freebsd.org", Issuer "R3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4ThLHt0Rvbz57Md for ; Fri, 23 Feb 2024 19:51:54 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) ARC-Seal: i=1; s=dkim; d=freebsd.org; t=1708717914; a=rsa-sha256; cv=none; b=rgFlDK/mGJjWA7HEkdsTl3Nltnzz/59nI0bUZREh1+wKzk1BKwHCrot5wzKS8u3dg38imY T907hmqTphmd/F1wIpPXDhe1Eu+C21hsny0+dLsQRI0ETf3UzvOeBHSfEB79wcv81Fo/Mk NE1V6SJOb9wlvYMCZEOtiOy6qRxv9VrWvDtgGgzqP29Go+bi8bDHABpoFmHxJET3DbfrsX pxF265sJPRo4xSqPACWVj1clrevyinjcX9SrujmWoFagQOsDf9iA9DzGUk1+KhMlGCsYsn anHEHnZJljybs1OnOWd/5gzL7tVn9HyxaiIpMW19zMHr14dd8r1fA8Cl7ESk5g== ARC-Authentication-Results: i=1; mx1.freebsd.org; none ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=freebsd.org; s=dkim; t=1708717914; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding; bh=GS4JZe2zFOsWEGxG3glQpj0h00+LL5xNOUcAbuvUvrE=; b=wj5R2LceWnPQJpiRMCDh5NzirEY3UrlXEHZiMZHzuuce/nPbiZO/KAw4oEuzwFehrwqh4X 26N9g4U61oyb7F+E5OozasuvPPXSi+C+21+HkDtTj1pRRC6Aqz12pe0ZA39jqI38IJ1zRK G9An3UN8zsCGv0tzJZSD8XrEqBXHOdt1peS3w6gDqrZjx3EKk6azjYO0CGoDPJR1piCSQg mYN4tfCDcw2L3NAXtTSJypYSwWoDtfat5BckhbGo9y3dY4ffXhTomgG08NPXejPaqoq3oB 35C3xMYRsJsyn9tjKJT+0eSUBfYyL4srZ8ft8lv0k6TTnpMahXmYgOZfj5s6Bg== Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2610:1c1:1:606c::50:1d]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by mxrelay.nyi.freebsd.org (Postfix) with ESMTPS id 4ThLHs6dzMzTs3 for ; Fri, 23 Feb 2024 19:51:53 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org ([127.0.1.5]) by kenobi.freebsd.org (8.15.2/8.15.2) with ESMTP id 41NJprma051500 for ; Fri, 23 Feb 2024 19:51:53 GMT (envelope-from bugzilla-noreply@freebsd.org) Received: (from www@localhost) by kenobi.freebsd.org (8.15.2/8.15.2/Submit) id 41NJprRq051499 for freebsd-arm@FreeBSD.org; Fri, 23 Feb 2024 19:51:53 GMT (envelope-from bugzilla-noreply@freebsd.org) X-Authentication-Warning: kenobi.freebsd.org: www set sender to bugzilla-noreply@freebsd.org using -f From: bugzilla-noreply@freebsd.org To: freebsd-arm@FreeBSD.org Subject: [Bug 277268] RPi4: LOR in gpioled(4) Date: Fri, 23 Feb 2024 19:51:54 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: new X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: arm X-Bugzilla-Version: 15.0-CURRENT X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Some People X-Bugzilla-Who: lexi.freebsd@le-fay.org X-Bugzilla-Status: New X-Bugzilla-Resolution: X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-arm@FreeBSD.org X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_id short_desc product version rep_platform op_sys bug_status bug_severity priority component assigned_to reporter Message-ID: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated List-Id: Porting FreeBSD to ARM processors List-Archive: https://lists.freebsd.org/archives/freebsd-arm List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-arm@freebsd.org MIME-Version: 1.0 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D277268 Bug ID: 277268 Summary: RPi4: LOR in gpioled(4) Product: Base System Version: 15.0-CURRENT Hardware: arm64 OS: Any Status: New Severity: Affects Some People Priority: --- Component: arm Assignee: freebsd-arm@FreeBSD.org Reporter: lexi.freebsd@le-fay.org while booting, the kernel reports a LOR in gpioled(4). the system appears = to work fine aside from this (i am not using the LED driver). gpioled0: on ofwbus0 lock order reversal: (sleepable after non-sleepable) 1st 0xffff000000dd5678 LED mtx (LED mtx, sleep mutex) @ /usr/src/sys/dev/led/led.c:295 2nd 0xffffa000013f8810 Raspberry Pi firmware gpio (Raspberry Pi firmware g= pio, sx) @ /usr/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:250 lock order LED mtx -> Raspberry Pi firmware gpio attempted at: #0 0xffff0000005257e0 at witness_checkorder+0xa78 #1 0xffff0000004ba384 at _sx_xlock+0x70 #2 0xffff00000092a8e8 at rpi_fw_gpio_pin_set+0xe4 #3 0xffff0000001dc00c at led_create_state+0x15c #4 0xffff0000001a2f34 at gpioled_attach+0x294 #5 0xffff0000004ec360 at device_attach+0x3fc #6 0xffff0000004ebec8 at device_probe_and_attach+0x80 #7 0xffff0000004ee4d4 at bus_generic_new_pass+0x100 #8 0xffff0000004ee484 at bus_generic_new_pass+0xb0 #9 0xffff0000004ee484 at bus_generic_new_pass+0xb0 #10 0xffff0000004e8d60 at bus_set_pass+0x50 #11 0xffff00000043138c at mi_startup+0x1e0 #12 0xffff0000000008a8 at virtdone+0x68 uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks h= eld: exclusive sleep mutex LED mtx (LED mtx) r =3D 0 (0xffff000000dd5678) locked= @ /usr/src/sys/dev/led/led.c:295 stack backtrace: #0 0xffff000000525c50 at witness_debugger+0x60 #1 0xffff000000526ee4 at witness_warn+0x40c #2 0xffff0000007eaa9c at uma_zalloc_debug+0x34 #3 0xffff0000007ea628 at uma_zalloc_arg+0x30 #4 0xffff000000481aa4 at malloc+0x90 #5 0xffff00000091f568 at bcm2835_firmware_property+0x48 #6 0xffff00000092a900 at rpi_fw_gpio_pin_set+0xfc #7 0xffff0000001dc00c at led_create_state+0x15c #8 0xffff0000001a2f34 at gpioled_attach+0x294 #9 0xffff0000004ec360 at device_attach+0x3fc #10 0xffff0000004ebec8 at device_probe_and_attach+0x80 #11 0xffff0000004ee4d4 at bus_generic_new_pass+0x100 #12 0xffff0000004ee484 at bus_generic_new_pass+0xb0 #13 0xffff0000004ee484 at bus_generic_new_pass+0xb0 #14 0xffff0000004e8d60 at bus_set_pass+0x50 #15 0xffff00000043138c at mi_startup+0x1e0 #16 0xffff0000000008a8 at virtdone+0x68 related: bug 248490 which was closed as "overcome by events" but the issue = is still present. full dmesg: ---<>--- GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb WARNING: Cannot find freebsd,dts-version property, cannot check DTB complia= nce Copyright (c) 1992-2024 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-CURRENT #0 main-n268454-9097284b98be: Thu Feb 22 06:04:22 UTC = 2024 root@releng3.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367) WARNING: WITNESS option enabled, expect reduced performance. VT(efifb): resolution 592x448 module scmi already present! real memory =3D 2067783680 (1971 MB) avail memory =3D 1988354048 (1896 MB) Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface kbd0 at kbdmux0 ofwbus0: simplebus0: on ofwbus0 ofw_clkbus0: on ofwbus0 clk_fixed0: on ofw_clkbus0 clk_fixed1: on ofw_clkbus0 clk_fixed2: on ofwbus0 clk_fixed3: on ofwbus0 simplebus1: on ofwbus0 simplebus2: on ofwbus0 regfix0: on ofwbus0 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency regfix1: on ofwbus0 regfix2: on ofwbus0 regfix3: on ofwbus0 regfix4: on ofwbus0 simplebus3: on ofwbus0 simple_mfd0: mem 0x7d5d2000-0x7d5d2ef= f on simplebus0 bcm2835_firmware0: on simplebus0 ofw_clkbus1: on bcm2835_firmware0 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency psci0: on ofwbus0 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency gic0: mem 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x4004600= 0-0x40047fff irq 30 on simplebus0 gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency gpio0: mem 0x7e200000-0x7e2000b3 irq 14,15 on simplebus0 gpiobus0: on gpio0 gpio1: on bcm2835_firmware0 gpiobus1: on gpio1 regfix0: Cannot configure GPIO pin: 5 REGNODE_INIT failed: 6 regfix0: Cannot register regulator. clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency regfix2: Cannot set GPIO pin: 6 REGNODE_INIT failed: 6 regfix2: Cannot register regulator. mbox0: mem 0x7e00b880-0x7e00b8bf irq 13 on simplebus0 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency gpioregulator0: on ofwbus0 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency generic_timer0: irq 4,5,6,7 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency bcm_dma0: mem 0x7e007000-0x7e007aff irq 31,32,33,34,35,36,37,38,39,40,41 on simplebus0 usb_nop_xceiv0: on ofwbus0 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency bcm2835_clkman0: mem 0x7e101000-0x7e102fff on simplebus0 gpioc0: on gpio0 uart0: mem 0x7e201000-0x7e2011ff irq 16 on simpleb= us0 uart0: console (115200,n,8,1) spi0: mem 0x7e204000-0x7e2041ff irq 18 on simplebus0 spibus0: on spi0 spibus0: at cs 0 mode 0 spibus0: at cs 1 mode 0 sdhci_bcm0: mem 0x7e300000-0x7e3000ff irq = 24 on simplebus0 mmc0: on sdhci_bcm0 iichb0: mem 0x7e804000-0x7e804fff irq 27 on simplebus0 bcmwd0: mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on simple= bus0 bcmrng0: mem 0x7e104000-0x7e104027 on simple= bus0 gpioc1: on gpio1 fb0: on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 15.0. VT: Replacing driver "efifb" with new "fb". fb0: 592x448(592x448@0,0) 32bpp fb0: fbswap: 1, pitch 2368, base 0x3eaf5000, screen_size 1060864 sdhci_bcm1: mem 0x7e340000-0x7e3400ff irq = 79 on simplebus1 mmc1: on sdhci_bcm1 pmu0: irq 0,1,2,3 on ofwbus0 cpulist0: on ofwbus0 cpu0: on cpulist0 bcm2835_cpufreq0: on cpu0 pcib0: mem 0x7d500000-0x7d50930f irq 80,81 on simplebus2 pcib0: hardware identifies as revision 0x304. pci0: on pcib0 pcib1: irq 91 at device 0.0 on pci0 pci1: on pcib1 bcm_xhci0: irq 92 at de= vice 0.0 on pci1 bcm_xhci0: 32 bytes context size, 64-bit DMA usbus0 on bcm_xhci0 genet0: mem 0x7d580000-0x7d58ffff irq 82,83 on simplebus2 genet0: GENET version 5.0 phy 0x0000 miibus0: on genet0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto genet0: Ethernet address: d8:3a:dd:53:f7:59 clk_fixed4: clock-fixed has no clock-frequency clk_fixed4: clock-fixed has no clock-frequency gpioled0: on ofwbus0 lock order reversal: (sleepable after non-sleepable) 1st 0xffff000000dd5678 LED mtx (LED mtx, sleep mutex) @ /usr/src/sys/dev/led/led.c:295 2nd 0xffffa000013f8810 Raspberry Pi firmware gpio (Raspberry Pi firmware g= pio, sx) @ /usr/src/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c:250 lock order LED mtx -> Raspberry Pi firmware gpio attempted at: #0 0xffff0000005257e0 at witness_checkorder+0xa78 #1 0xffff0000004ba384 at _sx_xlock+0x70 #2 0xffff00000092a8e8 at rpi_fw_gpio_pin_set+0xe4 #3 0xffff0000001dc00c at led_create_state+0x15c #4 0xffff0000001a2f34 at gpioled_attach+0x294 #5 0xffff0000004ec360 at device_attach+0x3fc #6 0xffff0000004ebec8 at device_probe_and_attach+0x80 #7 0xffff0000004ee4d4 at bus_generic_new_pass+0x100 #8 0xffff0000004ee484 at bus_generic_new_pass+0xb0 #9 0xffff0000004ee484 at bus_generic_new_pass+0xb0 #10 0xffff0000004e8d60 at bus_set_pass+0x50 #11 0xffff00000043138c at mi_startup+0x1e0 #12 0xffff0000000008a8 at virtdone+0x68 uma_zalloc_debug: zone "malloc-64" with the following non-sleepable locks h= eld: exclusive sleep mutex LED mtx (LED mtx) r =3D 0 (0xffff000000dd5678) locked= @ /usr/src/sys/dev/led/led.c:295 stack backtrace: #0 0xffff000000525c50 at witness_debugger+0x60 #1 0xffff000000526ee4 at witness_warn+0x40c #2 0xffff0000007eaa9c at uma_zalloc_debug+0x34 #3 0xffff0000007ea628 at uma_zalloc_arg+0x30 #4 0xffff000000481aa4 at malloc+0x90 #5 0xffff00000091f568 at bcm2835_firmware_property+0x48 #6 0xffff00000092a900 at rpi_fw_gpio_pin_set+0xfc #7 0xffff0000001dc00c at led_create_state+0x15c #8 0xffff0000001a2f34 at gpioled_attach+0x294 #9 0xffff0000004ec360 at device_attach+0x3fc #10 0xffff0000004ebec8 at device_probe_and_attach+0x80 #11 0xffff0000004ee4d4 at bus_generic_new_pass+0x100 #12 0xffff0000004ee484 at bus_generic_new_pass+0xb0 #13 0xffff0000004ee484 at bus_generic_new_pass+0xb0 #14 0xffff0000004e8d60 at bus_set_pass+0x50 #15 0xffff00000043138c at mi_startup+0x1e0 #16 0xffff0000000008a8 at virtdone+0x68 armv8crypto0: CPU lacks AES instructions Timecounters tick every 1.000 msec usbus0: 5.0Gbps Super Speed USB v3.0 sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ugen0.1: <(0x1106) XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <(0x1106) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Got command interrupt 0x00030000, but there is no active command. sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUMP = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902 sdhci_bcm0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci_bcm0-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000 sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00003947 sdhci_bcm0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci_bcm0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000 sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 sdhci_bcm0-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D mmc0: No compatible cards found on bus iicbus0: on iichb0 iic0: on iicbus0 mmcsd0: 16GB at mmc1 50.0MHz/4bit/65535-block bcm2835_cpufreq0: ARM 600MHz, Core 200MHz, SDRAM 400MHz, Turbo OFF CPU 0: ARM Cortex-A72 r0p3 affinity: 0 Cache Type =3D <64 byte D-cacheline,64 byte I-cacheline,= PIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 =3D Instruction Set Attributes 1 =3D <> Instruction Set Attributes 2 =3D <> Processor Features 0 =3D Processor Features 1 =3D <> Memory Model Features 0 =3D Memory Model Features 1 =3D <8bit VMID> Memory Model Features 2 =3D <32bit CCIDX,48bit VA> Debug Features 0 =3D Debug Features 1 =3D <> Auxiliary Features 0 =3D <> Auxiliary Features 1 =3D <> AArch32 Instruction Set Attributes 5 =3D AArch32 Media and VFP Features 0 =3D AArch32 Media and VFP Features 1 =3D CPU 1: ARM Cortex-A72 r0p3 affinity: 1 CPU 2: ARM Cortex-A72 r0p3 affinity: 2 CPU 3: ARM Cortex-A72 r0p3 affinity: 3 gic0: using for IPIs Release APs...done TCP_ratelimit: Is now initialized WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ufs/rootfs [rw]... uhub0: 5 ports with 4 removable, self powered WARNING: / was not properly dismounted Warning: no time-of-day clock registered, system time will not be set accurately Dual Console: Serial Primary, Video Secondary ugen0.2: at usbus0 uhub1 on uhub0 uhub1: on usbu= s0 uhub1: 4 ports with 4 removable, self powered genet0: link state changed to UP lo0: link state changed to UP genet0: link state changed to DOWN genet0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) --=20 You are receiving this mail because: You are the assignee for the bug.=