gnutls_3.8.8_error,compile-time-constant_fai ls_and_skips_many_other_packages_from_being_built

Reply: Herbert J. Skuhra: "Re: gnutls 3.8.8 error, compile-time-constant fails and skips many other packages from being built"
Reply: Fred Finster : "Re:_gnutls_3.8.8_error,__compile-time-constant___f ails_and_skips_many_other_packages_from_being_built"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: Fred Finster <fred_at_thegalacticzoo.com>
Date: Tue, 17 Dec 2024 04:02:52 UTC
Merry Christmas 2024 fellow FreeBSD ARM users.
I wave my hand, that I have encountered an error that Marius Schamschula details below.

A compile-time constant is computed at the time the code is compiled, while a run-time constant can only be computed while the application is running. A compile-time constant will have the same value each time an application runs, while a run-time constant may change each time.Sep 15, 2021

~~~~~~~~~~~~~~~~~~~~~
https://github.com/llvm/llvm-project
https://lists.gnutls.org/pipermail/gnutls-help/2024-November/thread.html#4866
Problem, how to compile file groups.c as a part of gnutls 3.8.8 and overcome
this compile-time constant error:
groups.c:93:2: error: initializer element is not a compile-time constant
        group_x25519,
        ^~~~~~~~~~~~
1 error generated.

My FreeBSD Raspberry Pi 4B environment:  
~~~~~~~~~~~~~~~~~~~~~~~
Last login: Mon Dec 16 22:35:17 2024 from 173.11.5.249
GhostBSD 24.01.1 GENERIC

Welcome to GhostBSD!

Release Notes, Errata:  https://www.GhostBSD.org/releases/
Security Advisories:    https://www.FreeBSD.org/security/
GhostBSD Docs:          https://wiki.GhostBSD.org/
GhostBSD FAQ:           https://wiki.GhostBSD.org/index.php/FAQ
GhostBSD Forums:        https://forums.GhostBSD.org/

Show the version of GhostBSD installed:  ghostbsd-version
Please include that output and any error messages when posting questions.
You can adjust the volume of various parts of the sound system in your
computer by typing 'mixer <type>.volume=<volume>%'.  To get a list of what
you can adjust, just type 'mixer'.
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ date
Tue Dec 17 02:46:01 UTC 2024
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ ifconfig
genet0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
        options=68000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        ether e4:5f:01:9d:54:76
        inet 10.0.0.159 netmask 0xffffff00 broadcast 10.0.0.255
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ clang --version
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)Target: aarch64-unknown-freebsd15.0
Thread model: posix
InstalledDir: /usr/bin
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ uname -arU
FreeBSD Ghost14-selfbuilt-rpi4B-nginx-tst1 14.0-STABLE FreeBSD 14.0-STABLE #1 stable-arm64/14-n230716-18b4bf31e36-dirty: Fri Feb 16 00:17:20 PST 2024     root@Ghost14-selfbuilt-rpi4B-nginx-tst1:/usr/obj/usr/ghost14/ghostbsd-src/arm64.aarch64/sys/GENERIC-VCHIQ arm64 1500001
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $




Last login: Mon Dec 16 22:35:17 2024 from 173.11.5.249
GhostBSD 24.01.1 GENERIC

Welcome to GhostBSD!

Release Notes, Errata:  https://www.GhostBSD.org/releases/
Security Advisories:    https://www.FreeBSD.org/security/
GhostBSD Docs:          https://wiki.GhostBSD.org/
GhostBSD FAQ:           https://wiki.GhostBSD.org/index.php/FAQ
GhostBSD Forums:        https://forums.GhostBSD.org/

Show the version of GhostBSD installed:  ghostbsd-version
Please include that output and any error messages when posting questions.
You can adjust the volume of various parts of the sound system in your
computer by typing 'mixer <type>.volume=<volume>%'.  To get a list of what
you can adjust, just type 'mixer'.
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ date
Tue Dec 17 02:46:01 UTC 2024
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ ifconfig
genet0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0 mtu 1500
        options=68000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        ether e4:5f:01:9d:54:76
        inet 10.0.0.159 netmask 0xffffff00 broadcast 10.0.0.255
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ clang --version
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)Target: aarch64-unknown-freebsd15.0
Thread model: posix
InstalledDir: /usr/bin
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ uname -arU
FreeBSD Ghost14-selfbuilt-rpi4B-nginx-tst1 14.0-STABLE FreeBSD 14.0-STABLE #1 stable-arm64/14-n230716-18b4bf31e36-dirty: Fri Feb 16 00:17:20 PST 2024     root@Ghost14-selfbuilt-rpi4B-nginx-tst1:/usr/obj/usr/ghost14/ghostbsd-src/arm64.aarch64/sys/GENERIC-VCHIQ arm64 1500001
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ freebsd-version -dru
Illegal option -d
usage: freebsd-version [-kru] [-j jail]
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ freebsd-version -kru
14.0-STABLE
14.0-STABLE
15.0-CURRENT
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ ghostbsd-version
24.01.1
fred@Ghost14-selfbuilt-rpi4B-nginx-tst1:~ $ ghostbsd-version -fkv
14.0-STABLE
1400500
24.01.1


~~~~~~~~~~~~~~~~
A compile-time constant is computed at the time the code is compiled, while a run-time constant can only be computed while the application is running. A compile-time constant will have the same value each time an application runs, while a run-time constant may change each time.Sep 15, 2021

https://lists.gnutls.org/pipermail/gnutls-help/2024-November/thread.html#4866  gnutls mailing threads.
https://lists.gnutls.org/pipermail/gnutls-help/2024-November/004866.html
groups.c file, not a compile-time constant  group_x25519

I/opt/local/include/p11-kit-1 -pipe -Os -isysroot/Library/Developer/CommandLineTools/SDKs/MacOSX14.sdk -arch arm64 -c groups.c  -fno-common -DPIC -o .libs/groups.o
groups.c:93:2: error: initializer element is not a compile-time constant
        group_x25519,
        ^~~~~~~~~~~~
1 error generated.
Marius
--
Marius Schamschula

URLS to view:
https://trac.macports.org/ticket/71273  Compile Time Constant 
https://lists.gnutls.org/pipermail/gnutls-help/2024-November/004865.html
https://lists.gnutls.org/pipermail/gnutls-help/2024-November/004866.html

~~~~~~~~~~~~~~~~~~~~~

gnutls_3.8.8 fails to compile and has a single error.  Other Poudriere packages depend on gnutls_3.8.8 and are skipped from compiling.  What do you suggest to fix this problem?  I am patient to wait until developers have a solution ready for gnutls.   Like first initializing group_x25519 with a NIL value.??
http://ghostbsd-arm64.blogspot.com Fred's Blog about porting GhostBSD x86 to Arm64