bug in rk_tsadc.c causes reboot

/sys/arm64/rockchip/rk_tsadc.c#L486
in the first line should be tsadc_temp_to_raw instead of tsadc_raw_to_temp 
the way its set for the alarm value

writing a bogus value causes a reboot when shutdown_mode is 0 (cru)
on rk3566. could cause the same effect on other boards too


	val =  tsadc_raw_to_temp(sc, sc->shutdown_temp);
	WR4(sc, TSADC_COMP_SHUT(sensor->channel), val);
	val = RD4(sc, TSADC_AUTO_CON);
	val |= TSADC_AUTO_SRC_EN(sensor->channel);
	WR4(sc, TSADC_AUTO_CON, val);

	/* Alarm temperature */
	val =  tsadc_temp_to_raw(sc, sc->alarm_temp);
	WR4(sc, TSADC_COMP_INT(sensor->channel), val);
	val = RD4(sc, TSADC_INT_EN);
	val |= TSADC_COMP_INT_SRC_EN(sensor->channel);
	WR4(sc, TSADC_INT_EN, val);