eqos(4) throughput
- Reply: Søren_Schmidt : "Re: eqos(4) throughput"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 13 Nov 2023 15:40:36 UTC
i have this problem with eqos(4) on a rk3566 board (orangepi 3b) when there is enough RX traffic the TX sinks packets (not all the packets are transmitted) this causes a max tcp uplink throughput of about 300mb/s testing udp tx only will get to 900mbs+ testing with iperf -c <server> -u -b 700m -d will show 25-30% of the tx packets lost the 25-30 percent can be decreased slightly if i fiddle with dtb ethernet tx_delay but 19% is the best i could get can somebody running 14+ on an rk356x board test this on box1 (server) iperf -s -u on box2 rk356x (client) iperf -c <server_ip> -b 700m -u -d and check the packets lost by client send stream ? the problem is the same on an official sbc image (debian) thank you