Re: Unable to boot Pi 3b+ SOLVED
- In reply to: Mark Millard : "Re: Unable to boot Pi 3b+ SOLVED"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 19 Aug 2023 06:06:08 UTC
Here is what I find for the RPI3B+ *.dtb file differences, ignoring
phandle lines (stripped out). Leading whitespace might not have been
preserved. This does not report on live differences and the PMIC
variations may well lead to live differences, as might the different
RPi* firmware *.elf/*.dat file versions.
# diff -u ~/RPi3B+-dtb-file-olderFBSD-nophandles.dts ~/RPi3B+-dtb-file-nophandles.dts | less
--- /usr/home/root/RPi3B+-dtb-file-olderFBSD-nophandles.dts 2023-08-18 22:42:44.990040000 -0700
+++ /usr/home/root/RPi3B+-dtb-file-nophandles.dts 2023-08-18 11:51:42.032538000 -0700
@@ -11,62 +11,71 @@
model = "Raspberry Pi 3 Model B+";
__overrides__ {
- act_led_activelow = <0x33 0x6770696f 0x733a3800>;
- act_led_gpio = <0x33 0x6770696f 0x733a3400>;
- act_led_trigger = [00 00 00 33 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00];
- arm_freq = <0x21 0x636c6f63 0x6b2d6672 0x65717565 0x6e63793a 0x30000000 0x22636c 0x6f636b2d 0x66726571 0x75656e63 0x793a3000 0x23 0x636c6f63 0x6b2d6672 0x65717565 0x6e63793a 0x30000000 0x24636c 0x6f636b2d 0x66726571 0x75656e63 0x793a3000>;
- audio = [00 00 00 2b 73 74 61 74 75 73 00];
+ act_led_activelow = <0x35 0x6770696f 0x733a3800>;
+ act_led_gpio = <0x35 0x6770696f 0x733a3400>;
+ act_led_trigger = [00 00 00 35 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00];
+ arm_freq = <0x22 0x636c6f63 0x6b2d6672 0x65717565 0x6e63793a 0x30000000 0x23636c 0x6f636b2d 0x66726571 0x75656e63 0x793a3000 0x24 0x636c6f63 0x6b2d6672 0x65717565 0x6e63793a 0x30000000 0x25636c 0x6f636b2d 0x66726571 0x75656e63 0x793a3000>;
+ audio = [00 00 00 34 62 6f 6f 74 61 72 67 73 7b 6f 6e 3d 27 73 6e 64 5f 62 63 6d 32 38 33 35 2e 65 6e 61 62 6c 65 5f 68 65 61 64 70 68 6f 6e 65 73 3d 31 20 73 6e 64 5f 62 63 6d 32 38 33 35 2e 65 6e 61 62 6c 65 5f 68 64 6d 69 3d 31 27 2c 6f 66 66 3d 27 73 6e 64 5f 62 63 6d 32 38 33 35 2e 65 6e 61 62 6c 65 5f 68 65 61 64 70 68 6f 6e 65 73 3d 30 20 73 6e 64 5f 62 63 6d 32 38 33 35 2e 65 6e 61 62 6c 65 5f 68 64 6d 69 3d 30 27 7d 00];
axiperf = [00 00 00 31 73 74 61 74 75 73 00];
cache_line_size;
cam0-led;
cam0-led-ctrl;
cam0-pwdn;
cam0-pwdn-ctrl;
- eee = [00 00 00 35 6d 69 63 72 6f 63 68 69 70 2c 65 65 65 2d 65 6e 61 62 6c 65 64 3f 00];
- eth_downshift_after = <0x35 0x6d696372 0x6f636869 0x702c646f 0x776e7368 0x6966742d 0x61667465 0x723a3000>;
- eth_led0 = [00 00 00 35 6d 69 63 72 6f 63 68 69 70 2c 6c 65 64 2d 6d 6f 64 65 73 3a 30 00];
- eth_led1 = [00 00 00 35 6d 69 63 72 6f 63 68 69 70 2c 6c 65 64 2d 6d 6f 64 65 73 3a 34 00];
- eth_max_speed = <0x35 0x6d61782d 0x73706565 0x643a3000>;
- i2c0 = [00 00 00 11 73 74 61 74 75 73 00 00 00 00 29 73 74 61 74 75 73 00];
- i2c0_baudrate = [00 00 00 11 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
- i2c1 = [00 00 00 2a 73 74 61 74 75 73 00];
- i2c1_baudrate = [00 00 00 2a 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
- i2c2_baudrate = [00 00 00 1b 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
- i2c2_iknowwhatimdoing = [00 00 00 1b 73 74 61 74 75 73 00];
- i2s = [00 00 00 27 73 74 61 74 75 73 00];
- krnbt = [00 00 00 32 73 74 61 74 75 73 00];
- krnbt_baudrate = <0x32 0x6d61782d 0x73706565 0x643a3000>;
- pwr_led_activelow = <0x34 0x6770696f 0x733a3800>;
- pwr_led_gpio = <0x34 0x6770696f 0x733a3400>;
- pwr_led_trigger = [00 00 00 34 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00];
+ eee = [00 00 00 37 6d 69 63 72 6f 63 68 69 70 2c 65 65 65 2d 65 6e 61 62 6c 65 64 3f 00];
+ eth_downshift_after = <0x37 0x6d696372 0x6f636869 0x702c646f 0x776e7368 0x6966742d 0x61667465 0x723a3000>;
+ eth_led0 = [00 00 00 37 6d 69 63 72 6f 63 68 69 70 2c 6c 65 64 2d 6d 6f 64 65 73 3a 30 00];
+ eth_led1 = [00 00 00 37 6d 69 63 72 6f 63 68 69 70 2c 6c 65 64 2d 6d 6f 64 65 73 3a 34 00];
+ eth_max_speed = <0x37 0x6d61782d 0x73706565 0x643a3000>;
+ hdmi = [00 00 00 32 73 74 61 74 75 73 00];
+ i2c0 = [00 00 00 1c 73 74 61 74 75 73 00 00 00 00 2a 73 74 61 74 75 73 00];
+ i2c0_baudrate = [00 00 00 1c 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
+ i2c1 = [00 00 00 2b 73 74 61 74 75 73 00];
+ i2c1_baudrate = [00 00 00 2b 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
+ i2c2_baudrate = [00 00 00 1a 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00];
+ i2c2_iknowwhatimdoing = [00 00 00 1a 73 74 61 74 75 73 00];
+ i2s = [00 00 00 28 73 74 61 74 75 73 00];
+ krnbt = [00 00 00 33 73 74 61 74 75 73 00];
+ krnbt_baudrate = <0x33 0x6d61782d 0x73706565 0x643a3000>;
+ pwr_led_activelow = <0x36 0x6770696f 0x733a3800>;
+ pwr_led_gpio = <0x36 0x6770696f 0x733a3400>;
+ pwr_led_trigger = [00 00 00 36 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00];
random = [00 00 00 2d 73 74 61 74 75 73 00];
+ sd = [00 00 00 2e 73 74 61 74 75 73 00];
sd_debug = [00 00 00 2e 62 72 63 6d 2c 64 65 62 75 67 00];
sd_force_pio = <0x2e 0x6272636d 0x2c666f72 0x63652d70 0x696f3f00>;
sd_overclock = <0x2e 0x6272636d 0x2c6f7665 0x72636c6f 0x636b2d35 0x303a3000>;
sd_pio_limit = [00 00 00 2e 62 72 63 6d 2c 70 69 6f 2d 6c 69 6d 69 74 3a 30 00];
sd_poll_once = [00 00 00 2e 6e 6f 6e 2d 72 65 6d 6f 76 61 62 6c 65 3f 00];
sdio_overclock = <0x2f 0x6272636d 0x2c6f7665 0x72636c6f 0x636b2d35 0x303a3000 0x30 0x6272636d 0x2c6f7665 0x72636c6f 0x636b2d35 0x303a3000>;
- spi = [00 00 00 28 73 74 61 74 75 73 00];
- tx_lpi_timer = [00 00 00 35 6d 69 63 72 6f 63 68 69 70 2c 74 78 2d 6c 70 69 2d 74 69 6d 65 72 3a 30 00];
- uart0 = [00 00 00 25 73 74 61 74 75 73 00];
- uart1 = [00 00 00 26 73 74 61 74 75 73 00];
+ spi = [00 00 00 29 73 74 61 74 75 73 00];
+ tx_lpi_timer = [00 00 00 37 6d 69 63 72 6f 63 68 69 70 2c 74 78 2d 6c 70 69 2d 74 69 6d 65 72 3a 30 00];
+ uart0 = [00 00 00 26 73 74 61 74 75 73 00];
+ uart1 = [00 00 00 27 73 74 61 74 75 73 00];
watchdog = [00 00 00 2c 73 74 61 74 75 73 00];
};
__symbols__ {
- act_led = "/leds/act";
+ act_led = "/leds/led-act";
alt0 = "/soc/gpio@7e200000/alt0";
- audio = "/soc/mailbox@7e00b840/bcm2835_audio";
audio_pins = "/soc/gpio@7e200000/audio_pins";
aux = "/soc/aux@7e215000";
axiperf = "/soc/axiperf";
+ brcmf = "/soc/mmcnr@7e300000/wifi@1";
bt = "/soc/serial@7e201000/bluetooth";
bt_pins = "/soc/gpio@7e200000/bt_pins";
- cam1_reg = "/cam1_reg";
+ cam0_clk = "/cam0_clk";
+ cam0_reg = "/cam_dummy_reg";
+ cam0_regulator = "/cam0_regulator";
+ cam1_clk = "/cam1_clk";
+ cam1_reg = "/cam1_regulator";
+ cam_dummy_reg = "/cam_dummy_reg";
+ chosen = "/chosen";
clk_osc = "/clocks/clk-osc";
clk_usb = "/clocks/clk-usb";
clocks = "/soc/cprman@7e101000";
cma = "/reserved-memory/linux,cma";
+ cooling_maps = "/thermal-zones/cpu-thermal/cooling-maps";
cpu0 = "/cpus/cpu@0";
cpu1 = "/cpus/cpu@1";
cpu2 = "/cpus/cpu@2";
@@ -77,6 +86,12 @@
csi1 = "/soc/csi@7e801000";
dma = "/soc/dma@7e007000";
dpi = "/soc/dpi@7e208000";
+ dpi_16bit_cpadhi_gpio0 = "/soc/gpio@7e200000/dpi_16bit_cpadhi_gpio0";
+ dpi_16bit_cpadhi_gpio2 = "/soc/gpio@7e200000/dpi_16bit_cpadhi_gpio2";
+ dpi_16bit_gpio0 = "/soc/gpio@7e200000/dpi_16bit_gpio0";
+ dpi_16bit_gpio2 = "/soc/gpio@7e200000/dpi_16bit_gpio2";
+ dpi_18bit_cpadhi_gpio0 = "/soc/gpio@7e200000/dpi_18bit_cpadhi_gpio0";
+ dpi_18bit_cpadhi_gpio2 = "/soc/gpio@7e200000/dpi_18bit_cpadhi_gpio2";
dpi_18bit_gpio0 = "/soc/gpio@7e200000/dpi_18bit_gpio0";
dpi_18bit_gpio2 = "/soc/gpio@7e200000/dpi_18bit_gpio2";
dpi_gpio0 = "/soc/gpio@7e200000/dpi_gpio0";
@@ -121,6 +136,7 @@
intc = "/soc/interrupt-controller@7e00b200";
jtag_gpio22 = "/soc/gpio@7e200000/jtag_gpio22";
jtag_gpio4 = "/soc/gpio@7e200000/jtag_gpio4";
+ l2 = "/cpus/l2-cache0";
leds = "/leds";
local_intc = "/soc/local_intc@40000000";
mailbox = "/soc/mailbox@7e00b880";
@@ -142,7 +158,7 @@
pwm1_gpio19 = "/soc/gpio@7e200000/pwm1_gpio19";
pwm1_gpio41 = "/soc/gpio@7e200000/pwm1_gpio41";
pwm1_gpio45 = "/soc/gpio@7e200000/pwm1_gpio45";
- pwr_led = "/leds/pwr";
+ pwr_led = "/leds/led-pwr";
random = "/soc/rng@7e104000";
rmem = "/reserved-memory";
sdhci = "/soc/mmc@7e300000";
@@ -165,6 +181,7 @@
spidev0 = "/soc/spi@7e204000/spidev@0";
spidev1 = "/soc/spi@7e204000/spidev@1";
thermal = "/soc/thermal@7e212000";
+ thermal_trips = "/thermal-zones/cpu-thermal/trips";
txp = "/soc/txp@7e004000";
uart0 = "/soc/serial@7e201000";
uart0_ctsrts_gpio16 = "/soc/gpio@7e200000/uart0_ctsrts_gpio16";
@@ -187,7 +204,7 @@
v3d = "/soc/v3d@7ec00000";
vc4 = "/soc/gpu";
vchiq = "/soc/mailbox@7e00b840";
- vcsm = "/soc/vcsm";
+ vcio = "/soc/firmware/vcio";
vdd_3v3_reg = "/fixedregulator_3v3";
vdd_5v0_reg = "/fixedregulator_5v0";
vec = "/soc/vec@7e806000";
@@ -195,7 +212,6 @@
};
aliases {
- audio = "/soc/mailbox@7e00b840/bcm2835_audio";
aux = "/soc/aux@7e215000";
axiperf = "/soc/axiperf";
dma = "/soc/dma@7e007000";
@@ -231,20 +247,45 @@
arm-pmu {
compatible = "arm,cortex-a53-pmu", "arm,cortex-a7-pmu";
- interrupt-parent = <0x1a>;
+ interrupt-parent = <0x18>;
interrupts = <0x9 0x4>;
};
- cam1_reg {
+ cam0_clk {
+ #clock-cells = <0x0>;
+ compatible = "fixed-clock";
+ status = "disabled";
+ };
+ cam0_regulator {
+
compatible = "regulator-fixed";
enable-active-high;
- gpio = <0xa 0x5 0x0>;
- regulator-name = "cam1-reg";
+ regulator-name = "cam0-reg";
status = "disabled";
};
+ cam1_clk {
+
+ #clock-cells = <0x0>;
+ compatible = "fixed-clock";
+ status = "disabled";
+ };
+ cam1_regulator {
+
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <0xb 0x5 0x0>;
+ regulator-name = "cam1-reg";
+ status = "okay";
+ };
+ cam_dummy_reg {
+
+ compatible = "regulator-fixed";
+ regulator-name = "cam-dummy-reg";
+ status = "okay";
+ };
chosen {
- bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
+ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0";
};
clocks {
@@ -272,34 +313,70 @@
compatible = "arm,cortex-a53";
cpu-release-addr = <0x0 0xd8>;
+ d-cache-line-size = <0x40>;
+ d-cache-sets = <0x80>;
+ d-cache-size = <0x8000>;
device_type = "cpu";
enable-method = "spin-table";
+ i-cache-line-size = <0x40>;
+ i-cache-sets = <0x100>;
+ i-cache-size = <0x8000>;
+ next-level-cache = <0x21>;
reg = <0x0>;
};
cpu@1 {
compatible = "arm,cortex-a53";
cpu-release-addr = <0x0 0xe0>;
+ d-cache-line-size = <0x40>;
+ d-cache-sets = <0x80>;
+ d-cache-size = <0x8000>;
device_type = "cpu";
enable-method = "spin-table";
+ i-cache-line-size = <0x40>;
+ i-cache-sets = <0x100>;
+ i-cache-size = <0x8000>;
+ next-level-cache = <0x21>;
reg = <0x1>;
};
cpu@2 {
compatible = "arm,cortex-a53";
cpu-release-addr = <0x0 0xe8>;
+ d-cache-line-size = <0x40>;
+ d-cache-sets = <0x80>;
+ d-cache-size = <0x8000>;
device_type = "cpu";
enable-method = "spin-table";
+ i-cache-line-size = <0x40>;
+ i-cache-sets = <0x100>;
+ i-cache-size = <0x8000>;
+ next-level-cache = <0x21>;
reg = <0x2>;
};
cpu@3 {
compatible = "arm,cortex-a53";
cpu-release-addr = <0x0 0xf0>;
+ d-cache-line-size = <0x40>;
+ d-cache-sets = <0x80>;
+ d-cache-size = <0x8000>;
device_type = "cpu";
enable-method = "spin-table";
+ i-cache-line-size = <0x40>;
+ i-cache-sets = <0x100>;
+ i-cache-size = <0x8000>;
+ next-level-cache = <0x21>;
reg = <0x3>;
};
+ l2-cache0 {
+
+ cache-level = <0x2>;
+ cache-line-size = <0x40>;
+ cache-sets = <0x200>;
+ cache-size = <0x80000>;
+ compatible = "cache";
+ };
};
fixedregulator_3v3 {
@@ -320,17 +397,18 @@
leds {
compatible = "gpio-leds";
- act {
+ led-act {
- default-state = "keep";
- gpios = <0x10 0x1d 0x0>;
- label = "led0";
+ default-state = "off";
+ gpios = <0x7 0x1d 0x0>;
+ label = "ACT";
linux,default-trigger = "mmc0";
};
- pwr {
+ led-pwr {
- gpios = <0xa 0x2 0x1>;
- label = "led1";
+ default-state = "off";
+ gpios = <0xb 0x2 0x1>;
+ label = "PWR";
linux,default-trigger = "default-on";
};
};
@@ -367,7 +445,7 @@
aux@7e215000 {
#clock-cells = <0x1>;
- clocks = <0x7 0x14>;
+ clocks = <0x8 0x14>;
compatible = "brcm,bcm2835-aux";
reg = <0x7e215000 0x8>;
};
@@ -392,10 +470,10 @@
#clock-cells = <0x1>;
#size-cells = <0x0>;
clock-names = "lp", "vpu";
- clocks = <0x7 0x2d 0x1e 0x4>;
+ clocks = <0x8 0x2d 0x19 0x4>;
compatible = "brcm,bcm2835-unicam";
interrupts = <0x2 0x6>;
- power-domains = <0x14 0xc>;
+ power-domains = <0x11 0xc>;
reg = <0x7e800000 0x800 0x7e802000 0x4>;
status = "disabled";
};
@@ -406,10 +484,10 @@
#size-cells = <0x0>;
brcm,num-data-lanes = <0x2>;
clock-names = "lp", "vpu";
- clocks = <0x7 0x2e 0x1e 0x4>;
+ clocks = <0x8 0x2e 0x19 0x4>;
compatible = "brcm,bcm2835-unicam";
interrupts = <0x2 0x7>;
- power-domains = <0x14 0xd>;
+ power-domains = <0x11 0xd>;
reg = <0x7e801000 0x800 0x7e802004 0x4>;
status = "disabled";
};
@@ -424,10 +502,8 @@
};
dpi@7e208000 {
- #address-cells = <0x1>;
- #size-cells = <0x0>;
clock-names = "core", "pixel";
- clocks = <0x7 0x14 0x7 0x2c>;
+ clocks = <0x8 0x14 0x8 0x2c>;
compatible = "brcm,bcm2835-dpi";
reg = <0x7e208000 0x8c>;
status = "disabled";
@@ -439,10 +515,10 @@
#size-cells = <0x0>;
clock-names = "phy", "escape", "pixel";
clock-output-names = "dsi0_byte", "dsi0_ddr2", "dsi0_ddr";
- clocks = <0x7 0x20 0x7 0x2f 0x7 0x31>;
+ clocks = <0x8 0x20 0x8 0x2f 0x8 0x31>;
compatible = "brcm,bcm2835-dsi0";
interrupts = <0x2 0x4>;
- power-domains = <0x14 0x11>;
+ power-domains = <0x11 0x11>;
reg = <0x7e209000 0x78>;
status = "disabled";
};
@@ -453,10 +529,10 @@
#size-cells = <0x0>;
clock-names = "phy", "escape", "pixel";
clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
- clocks = <0x7 0x23 0x7 0x30 0x7 0x32>;
+ clocks = <0x8 0x23 0x8 0x30 0x8 0x32>;
compatible = "brcm,bcm2835-dsi1";
interrupts = <0x2 0xc>;
- power-domains = <0x14 0x12>;
+ power-domains = <0x11 0x12>;
reg = <0x7e700000 0x8c>;
status = "disabled";
};
@@ -483,8 +559,13 @@
#gpio-cells = <0x2>;
compatible = "raspberrypi,firmware-gpio";
gpio-controller;
+ gpio-line-names = "BT_ON", "WL_ON", "PWR_LED_R", "LAN_RUN", "NC", "CAM_GPIO0", "CAM_GPIO1", "NC";
status = "okay";
};
+ vcio {
+
+ compatible = "raspberrypi,vcio";
+ };
};
firmwarekms@7e600000 {
@@ -500,6 +581,8 @@
#interrupt-cells = <0x2>;
compatible = "brcm,bcm2835-gpio";
gpio-controller;
+ gpio-line-names = "ID_SDA", "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", "GPIO5", "GPIO6", "SPI_CE1_N", "SPI_CE0_N", "SPI_MISO", "SPI_MOSI", "SPI_SCLK", "GPIO12", "GPIO13", "TXD1", "RXD1", "GPIO16", "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21", "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26", "GPIO27", "HDMI_HPD_N", "STATUS_LED_G", "CTS0", "RTS0", "TXD0", "RXD0", "SD1_CLK", "SD1_CMD", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", "SMPS_SCL", "SMPS_SDA", "SD_CLK_R", "SD_CMD_R", "SD_DATA0_R", "SD_DATA1_R", "SD_DATA2_R", "SD_DATA3_R";
+ gpio-ranges = <0x7 0x0 0x0 0x36>;
interrupt-controller;
interrupts = <0x2 0x11 0x2 0x12>;
pinctrl-names = "default";
@@ -513,6 +596,7 @@
brcm,function = <0x4>;
brcm,pins = <0x28 0x29>;
+ brcm,pull = <0x0>;
};
bt_pins {
@@ -520,6 +604,37 @@
brcm,pins = <0x2b>;
brcm,pull = <0x0>;
};
+ dpi_16bit_cpadhi_gpio0 {
+
+ brcm,function = <0x6>;
+ brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0xc 0xd 0xe 0xf 0x10 0x11 0x14 0x15 0x16 0x17 0x18>;
+ };
+ dpi_16bit_cpadhi_gpio2 {
+
+ brcm,function = <0x6>;
+ brcm,pins = <0x2 0x3 0x4 0x5 0x6 0x7 0x8 0xc 0xd 0xe 0xf 0x10 0x11 0x14 0x15 0x16 0x17 0x18>;
+ };
+ dpi_16bit_gpio0 {
+
+ brcm,function = <0x6>;
+ brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13>;
+ };
+ dpi_16bit_gpio2 {
+
+ brcm,function = <0x6>;
+ brcm,pins = <0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13>;
+ };
+ dpi_18bit_cpadhi_gpio0 {
+
+ brcm,function = <0x6>;
+ brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xc 0xd 0xe 0xf 0x10 0x11 0x14 0x15 0x16 0x17 0x18 0x19>;
+ brcm,pull = <0x0>;
+ };
+ dpi_18bit_cpadhi_gpio2 {
+
+ brcm,function = <0x6>;
+ brcm,pins = <0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xc 0xd 0xe 0xf 0x10 0x11 0x14 0x15 0x16 0x17 0x18 0x19>;
+ };
dpi_18bit_gpio0 {
brcm,function = <0x6>;
@@ -811,19 +926,20 @@
gpu {
compatible = "brcm,bcm2835-vc4";
+ raspberrypi,firmware = <0x6>;
status = "disabled";
};
hdmi@7e902000 {
clock-names = "pixel", "hdmi";
- clocks = <0x7 0x10 0x7 0x19>;
+ clocks = <0x19 0x9 0x19 0xd>;
compatible = "brcm,bcm2835-hdmi";
- ddc = <0x1b>;
+ ddc = <0x1a>;
dma-names = "audio-rx";
- dmas = <0xb 0x9000011>;
- hpd-gpios = <0x10 0x1c 0x1>;
+ dmas = <0xc 0x9000011>;
+ hpd-gpios = <0x7 0x1c 0x1>;
interrupts = <0x2 0x8 0x2 0x9>;
- power-domains = <0x14 0x5>;
+ power-domains = <0x11 0x5>;
reg = <0x7e902000 0x600 0x7e808000 0x100>;
reg-names = "hdmi", "hd";
status = "disabled";
@@ -840,7 +956,7 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
clock-frequency = <0x186a0>;
- clocks = <0x7 0x14>;
+ clocks = <0x8 0x14>;
compatible = "brcm,bcm2835-i2c";
interrupts = <0x2 0x15>;
reg = <0x7e205000 0x200>;
@@ -851,10 +967,10 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
clock-frequency = <0x186a0>;
- clocks = <0x7 0x14>;
+ clocks = <0x8 0x14>;
compatible = "brcm,bcm2835-i2c";
interrupts = <0x2 0x15>;
- pinctrl-0 = <0x17>;
+ pinctrl-0 = <0x15>;
pinctrl-names = "default";
reg = <0x7e804000 0x1000>;
status = "disabled";
@@ -864,7 +980,7 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
clock-frequency = <0x186a0>;
- clocks = <0x7 0x14>;
+ clocks = <0x8 0x14>;
compatible = "brcm,bcm2835-i2c";
interrupts = <0x2 0x15>;
reg = <0x7e805000 0x1000>;
@@ -875,9 +991,9 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "i2c-mux-pinctrl";
- i2c-parent = <0x11>;
- pinctrl-0 = <0x12>;
- pinctrl-1 = <0x13>;
+ i2c-parent = <0x1c>;
+ pinctrl-0 = <0x1d>;
+ pinctrl-1 = <0x1e>;
pinctrl-names = "i2c0", "i2c_csi_dsi";
status = "disabled";
i2c@0 {
@@ -896,11 +1012,11 @@
i2s@7e203000 {
#sound-dai-cells = <0x0>;
- clocks = <0x7 0x1f>;
+ clocks = <0x8 0x1f>;
compatible = "brcm,bcm2835-i2s";
dma-names = "tx", "rx";
- dmas = <0xb 0x2 0xb 0x3>;
- pinctrl-0 = <0xd>;
+ dmas = <0xc 0x2 0xc 0x3>;
+ pinctrl-0 = <0xe>;
pinctrl-names = "default";
reg = <0x7e203000 0x24>;
status = "disabled";
@@ -910,7 +1026,7 @@
#interrupt-cells = <0x2>;
compatible = "brcm,bcm2836-armctrl-ic";
interrupt-controller;
- interrupt-parent = <0x1a>;
+ interrupt-parent = <0x18>;
interrupts = <0x8 0x4>;
reg = <0x7e00b200 0x200>;
};
@@ -919,22 +1035,16 @@
#interrupt-cells = <0x2>;
compatible = "brcm,bcm2836-l1-intc";
interrupt-controller;
- interrupt-parent = <0x1a>;
+ interrupt-parent = <0x18>;
reg = <0x40000000 0x100>;
};
mailbox@7e00b840 {
compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
interrupts = <0x0 0x2>;
+ pinctrl-0 = <0x20>;
+ pinctrl-names = "default";
reg = <0x7e00b840 0x3c>;
- bcm2835_audio {
-
- brcm,pwm-channels = <0x8>;
- compatible = "brcm,bcm2835-audio";
- pinctrl-0 = <0x20>;
- pinctrl-names = "default";
- status = "disabled";
- };
};
mailbox@7e00b880 {
@@ -948,12 +1058,13 @@
brcm,overclock-50 = <0x0>;
brcm,pio-limit = <0x1>;
bus-width = <0x4>;
- clocks = <0x7 0x14>;
+ clocks = <0x8 0x14>;
compatible = "brcm,bcm2835-sdhost";
dma-names = "rx-tx";
- dmas = <0xb 0x2000000d>;
+ dmas = <0xc 0x2000000d>;
+ firmware = <0x6>;
interrupts = <0x2 0x18>;
- pinctrl-0 = <0xc>;
+ pinctrl-0 = <0xd>;
pinctrl-names = "default";
reg = <0x7e202000 0x100>;
status = "okay";
@@ -962,30 +1073,37 @@
brcm,overclock-50 = <0x0>;
bus-width = <0x4>;
- clocks = <0x7 0x1c>;
+ clocks = <0x8 0x1c>;
compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci";
dma-names = "rx-tx";
- dmas = <0xb 0xb>;
+ dmas = <0xc 0xb>;
interrupts = <0x2 0x1e>;
- pinctrl-0 = <0x1c>;
+ pinctrl-0 = <0x14>;
pinctrl-names = "default";
reg = <0x7e300000 0x100>;
status = "disabled";
};
mmcnr@7e300000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
brcm,overclock-50 = <0x0>;
bus-width = <0x4>;
- clocks = <0x7 0x1c>;
+ clocks = <0x8 0x1c>;
compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci";
dma-names = "rx-tx";
- dmas = <0xb 0xb>;
+ dmas = <0xc 0xb>;
interrupts = <0x2 0x1e>;
non-removable;
- pinctrl-0 = <0x1d>;
+ pinctrl-0 = <0x1b>;
pinctrl-names = "default";
reg = <0x7e300000 0x100>;
status = "okay";
+ wifi@1 {
+
+ compatible = "brcm,bcm4329-fmac";
+ reg = <0x1>;
+ };
};
pixelvalve@7e206000 {
@@ -1018,8 +1136,8 @@
#pwm-cells = <0x2>;
assigned-clock-rates = <0x989680>;
- assigned-clocks = <0x7 0x1e>;
- clocks = <0x7 0x1e>;
+ assigned-clocks = <0x8 0x1e>;
+ clocks = <0x8 0x1e>;
compatible = "brcm,bcm2835-pwm";
reg = <0x7e20c000 0x28>;
status = "disabled";
@@ -1034,11 +1152,11 @@
arm,primecell-periphid = <0x241011>;
clock-names = "uartclk", "apb_pclk";
- clocks = <0x7 0x13 0x7 0x14>;
+ clocks = <0x8 0x13 0x8 0x14>;
compatible = "arm,pl011", "arm,primecell";
cts-event-workaround;
interrupts = <0x2 0x19>;
- pinctrl-0 = <0x8 0x9>;
+ pinctrl-0 = <0x9 0xa>;
pinctrl-names = "default";
reg = <0x7e201000 0x200>;
skip-init;
@@ -1047,16 +1165,16 @@
compatible = "brcm,bcm43438-bt";
max-speed = <0x2dc6c0>;
- shutdown-gpios = <0xa 0x0 0x0>;
+ shutdown-gpios = <0xb 0x0 0x0>;
status = "disabled";
};
};
serial@7e215040 {
- clocks = <0x15 0x0>;
+ clocks = <0x12 0x0>;
compatible = "brcm,bcm2835-aux-uart";
interrupts = <0x1 0x1d>;
- pinctrl-0 = <0x16>;
+ pinctrl-0 = <0x13>;
pinctrl-names = "default";
reg = <0x7e215040 0x40>;
skip-init;
@@ -1065,18 +1183,18 @@
compatible = "brcm,bcm43438-bt";
max-speed = <0x70800>;
- shutdown-gpios = <0xa 0x0 0x0>;
+ shutdown-gpios = <0xb 0x0 0x0>;
status = "disabled";
};
};
smi@7e600000 {
assigned-clock-rates = <0x7735940>;
- assigned-clocks = <0x7 0x2a>;
- clocks = <0x7 0x2a>;
+ assigned-clocks = <0x8 0x2a>;
+ clocks = <0x8 0x2a>;
compatible = "brcm,bcm2835-smi";
dma-names = "rx-tx";
- dmas = <0xb 0x4>;
+ dmas = <0xc 0x4>;
interrupts = <0x2 0x10>;
reg = <0x7e600000 0x100>;
status = "disabled";
@@ -1089,13 +1207,13 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
- clocks = <0x7 0x14>;
+ clocks = <0x8 0x14>;
compatible = "brcm,bcm2835-spi";
- cs-gpios = <0x10 0x8 0x1 0x10 0x7 0x1>;
+ cs-gpios = <0x7 0x8 0x1 0x7 0x7 0x1>;
dma-names = "tx", "rx";
- dmas = <0xb 0x6 0xb 0x7>;
+ dmas = <0xc 0x6 0xc 0x7>;
interrupts = <0x2 0x16>;
- pinctrl-0 = <0xe 0xf>;
+ pinctrl-0 = <0xf 0x10>;
pinctrl-names = "default";
reg = <0x7e204000 0x200>;
status = "disabled";
@@ -1120,7 +1238,7 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
- clocks = <0x15 0x1>;
+ clocks = <0x12 0x1>;
compatible = "brcm,bcm2835-aux-spi";
interrupts = <0x1 0x1d>;
reg = <0x7e215080 0x40>;
@@ -1130,7 +1248,7 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
- clocks = <0x15 0x2>;
+ clocks = <0x12 0x2>;
compatible = "brcm,bcm2835-aux-spi";
interrupts = <0x1 0x1d>;
reg = <0x7e2150c0 0x40>;
@@ -1139,7 +1257,7 @@
thermal@7e212000 {
#thermal-sensor-cells = <0x0>;
- clocks = <0x7 0x1b>;
+ clocks = <0x8 0x1b>;
compatible = "brcm,bcm2837-thermal";
reg = <0x7e212000 0x8>;
status = "okay";
@@ -1156,13 +1274,13 @@
#address-cells = <0x1>;
#size-cells = <0x0>;
clock-names = "otg";
- clocks = <0x18>;
+ clocks = <0x16>;
compatible = "brcm,bcm2708-usb";
interrupt-names = "usb", "soft";
interrupts = <0x1 0x9 0x2 0x0>;
phy-names = "usb2-phy";
- phys = <0x19>;
- power-domains = <0x14 0x6>;
+ phys = <0x17>;
+ power-domains = <0x11 0x6>;
reg = <0x7e980000 0x10000 0x7e006000 0x1000>;
usb-port@1 {
@@ -1201,22 +1319,16 @@
compatible = "brcm,vc4-v3d";
interrupts = <0x1 0xa>;
- power-domains = <0x14 0xa>;
+ power-domains = <0x11 0xa>;
reg = <0x7ec00000 0x1000>;
status = "disabled";
};
- vcsm {
-
- compatible = "raspberrypi,bcm2835-vcsm";
- firmware = <0x6>;
- status = "okay";
- };
vec@7e806000 {
- clocks = <0x7 0x18>;
+ clocks = <0x19 0xf>;
compatible = "brcm,bcm2835-vec";
interrupts = <0x2 0x1b>;
- power-domains = <0x14 0x7>;
+ power-domains = <0x11 0x7>;
reg = <0x7e806000 0x1000>;
status = "disabled";
};
@@ -1225,9 +1337,10 @@
#power-domain-cells = <0x1>;
#reset-cells = <0x1>;
clock-names = "v3d", "peri_image", "h264", "isp";
- clocks = <0x7 0x15 0x7 0x1d 0x7 0x17 0x7 0x16>;
+ clocks = <0x8 0x15 0x8 0x1d 0x8 0x17 0x8 0x16>;
compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
reg = <0x7e100000 0x114 0x7e00a000 0x24>;
+ reg-names = "pm", "asb";
system-power-controller;
};
};
@@ -1242,13 +1355,22 @@
cooling-maps {
};
+ trips {
+
+ cpu-crit {
+
+ hysteresis = <0x0>;
+ temperature = <0x1adb0>;
+ type = "critical";
+ };
+ };
};
};
timer {
always-on;
compatible = "arm,armv7-timer";
- interrupt-parent = <0x1a>;
+ interrupt-parent = <0x18>;
interrupts = <0x0 0x4 0x1 0x4 0x3 0x4 0x2 0x4>;
};
};
===
Mark Millard
marklmi at yahoo.com