rpi4 8GB: sysutils/u-boot-*: 2023.07.02 && sysutils/rpi-firmware: 1.20230405

Hello all,

I'm just testing latest updates on u-boot and rpi-firmware and all looks
good on rpi4 8GB rev 1.5

- tested config.txt 'arm_boost=1' and it sets auto cpu to 1800.

dmesg shows a lot of:
clk_fixed4: Cannot FDT parameters.

*I've attached dmesg to e-mail.*

config.txt
===
[all]
arm_64bit=1
#dtparam=audio=on,i2c_arm=on,spi=on
dtoverlay=disable-bt
dtoverlay=mmc
device_tree_address=0x4000
kernel=u-boot.bin

[pi4]
hdmi_safe=0
armstub=armstub8-gic.bin
max_framebuffers=2
hdmi_force_hotplug=1
hdmi_group=2
hdmi_drive=2
hdmi_mode=82
disable_overscan=1
# overclock 20210303
#over_voltage=6
#arm_freq=2000
#sdram_freq_min=3200
arm_boost=1
force_turbo=1
===

Cheers,

-- 
Nuno Teixeira
FreeBSD Committer (ports)