Re: armv7 kyua runs via chroot on aarch64: zfs tests leave behind processes from timed out tests
- Reply: Mark Millard : "Re: armv7 kyua runs via chroot on aarch64: zfs tests leave behind processes from timed out tests"
- In reply to: Mark Millard : "armv7 kyua runs via chroot on aarch64: zfs tests leave behind processes from timed out tests"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Thu, 03 Aug 2023 14:18:21 UTC
On Aug 3, 2023, at 00:19, Mark Millard <marklmi@yahoo.com> wrote:
> This is after the patch (leading whitespace might
> not have been preserved in what you see):
>
> # git -C /usr/main-src/ diff sys/dev/md/
> diff --git a/sys/dev/md/md.c b/sys/dev/md/md.c
> index a719dccb1955..365296ec4276 100644
> --- a/sys/dev/md/md.c
> +++ b/sys/dev/md/md.c
> @@ -147,8 +147,15 @@ struct md_ioctl32 {
> int md_fwsectors;
> uint32_t md_label;
> int md_pad[MDNPAD];
> +#ifdef __aarch64__
> + uint32_t md_pad0;
> +#endif
> } __attribute__((__packed__));
> +#ifdef __aarch64__
> +CTASSERT((sizeof(struct md_ioctl32)) == 440);
> +#else
> CTASSERT((sizeof(struct md_ioctl32)) == 436);
> +#endif
>
> #define MDIOCATTACH_32 _IOC_NEWTYPE(MDIOCATTACH, struct md_ioctl32)
> #define MDIOCDETACH_32 _IOC_NEWTYPE(MDIOCDETACH, struct md_ioctl32)
>
>
> The kyua run is still in process, but at this point there is
> the following accumulation from the zfs testing timouts:
>
> # ps -alxdww
> UID PID PPID C PRI NI VSZ RSS MWCHAN STAT TT TIME COMMAND
> . . .
> 0 17491 1 6 20 0 36460 12324 - T - 0:24.71 |-- fsync_integrity /testdir2316/testfile2316
> 0 17551 1 5 20 0 10600 7512 tx->tx_s D - 0:00.00 |-- /sbin/zpool destroy -f testpool.2316
> 0 17739 1 7 20 0 10600 7308 zfs tear D - 0:00.00 |-- /sbin/zpool destroy -f testpool.2316
> 0 17841 1 3 20 0 10600 7316 tx->tx_s D - 0:00.00 |-- /sbin/zpool destroy -f testpool.2316
> 0 17860 1 0 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 17888 1 3 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 17907 1 6 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 17928 1 7 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 17955 1 0 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 17976 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 17995 1 2 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18023 1 2 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18043 1 2 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18064 1 3 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18085 1 0 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18114 1 7 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18135 1 2 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18157 1 6 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18177 1 6 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18205 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18224 1 1 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18255 1 3 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18275 1 1 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18296 1 5 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18317 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18345 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18365 1 2 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18386 1 3 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18412 1 1 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18447 1 5 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18466 1 5 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18516 1 6 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18535 1 2 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> 0 18632 1 0 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
It has added:
0 18656 1 7 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 18748 1 0 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 18767 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 18858 1 5 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 18877 1 0 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 18907 1 7 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 18926 1 5 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 18956 1 7 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 18975 1 7 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19005 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19026 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19298 1 6 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19317 1 6 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19408 1 7 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19427 1 2 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19518 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19537 1 4 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
0 19635 1 5 20 0 10080 6956 spa_name D - 0:00.00 |-- /sbin/zfs upgrade
> Lots of these are from 300s timeouts but some are from 1200s or
> 1800s or 3600s timeouts.
>
> For reference:
>
> sys/cddl/zfs/tests/txg_integrity/txg_integrity_test:fsync_integrity_001_pos -> broken: Test case body timed out [1800.053s]
> sys/cddl/zfs/tests/txg_integrity/txg_integrity_test:txg_integrity_001_pos -> passed [63.702s]
> sys/cddl/zfs/tests/userquota/userquota_test:groupspace_001_pos -> skipped: Required program 'runwattr' not found in PATH [0.003s]
> sys/cddl/zfs/tests/userquota/userquota_test:groupspace_002_pos -> skipped: Required program 'runwattr' not found in PATH [0.002s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_001_pos -> skipped: Required program 'runwattr' not found in PATH [0.002s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_002_pos -> broken: Test case cleanup timed out [0.148s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_003_pos -> broken: Test case cleanup timed out [0.151s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_004_pos -> skipped: Required program 'runwattr' not found in PATH [0.002s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_005_neg -> broken: Test case body timed out [300.021s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_006_pos -> broken: Test case body timed out [300.080s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_007_pos -> skipped: Required program 'runwattr' not found in PATH [0.002s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_008_pos -> broken: Test case body timed out [300.034s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_009_pos -> broken: Test case body timed out [300.143s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_010_pos -> skipped: Required program 'runwattr' not found in PATH [0.002s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_011_pos -> broken: Test case body timed out [300.003s]
> sys/cddl/zfs/tests/userquota/userquota_test:userquota_012_neg -> broken: Test case body timed out [300.019s]
> sys/cddl/zfs/tests/userquota/userquota_test:userspace_001_pos -> skipped: Required program 'runwattr' not found in PATH [0.002s]
> sys/cddl/zfs/tests/userquota/userquota_test:userspace_002_pos -> skipped: Required program 'runwattr' not found in PATH [0.002s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_001_pos -> broken: Test case body timed out [300.052s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_002_pos -> skipped: Required program 'labelit' not found in PATH [0.002s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_003_pos -> broken: Test case body timed out [300.076s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_004_pos -> broken: Test case body timed out [300.106s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_005_pos -> skipped: Required program 'ff' not found in PATH [0.002s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_006_pos -> broken: Test case body timed out [300.015s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_007_pos -> broken: Test case body timed out [300.005s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_008_pos -> skipped: Required program 'ncheck' not found in PATH [0.002s]
> sys/cddl/zfs/tests/utils_test/utils_test_test:utils_test_009_pos -> broken: Test case body timed out [300.051s]
> sys/cddl/zfs/tests/write_dirs/write_dirs_test:write_dirs_001_pos -> broken: Test case body timed out [1200.056s]
> sys/cddl/zfs/tests/write_dirs/write_dirs_test:write_dirs_002_pos -> broken: Test case body timed out [1200.046s]
> sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_autoreplace_001_neg -> broken: Test case body timed out [3600.055s]
And added:
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_autoreplace_002_pos -> broken: Test case body timed out [3600.028s]
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_autoreplace_003_pos -> broken: Test case body timed out [3600.146s]
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_degrade_001_pos -> broken: Test case body timed out [600.067s]
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_degrade_002_pos -> broken: Test case body timed out [600.015s]
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_fault_001_pos -> broken: Test case body timed out [300.061s]
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_hotspare_001_pos -> broken: Test case body timed out [3600.042s]
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_hotspare_002_pos -> broken: Test case body timed out [3600.161s]
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_hotspare_003_pos -> broken: Test case body timed out [3600.033s]
sys/cddl/zfs/tests/zfsd/zfsd_test:zfsd_hotspare_004_pos -> broken: Test case body timed out [3600.007s]
> Other timeouts not from zfs tests have not had an accumulation
> of processes left behind. But these may be the set of tests
> that use ksh93 for scripting. I make no claim of knowing the
> zfs vs. ksh93 vs. both vs. ??? for what is contributing.
>
>
> I'll note that the system was booted via a bectl BE environment
> on the only FreeBSD media enabled, so is a zfs-root boot context.
>
> For reference:
>
> # uname -apKU
> FreeBSD CA78C-WDK23-ZFS 14.0-CURRENT FreeBSD 14.0-CURRENT aarch64 1400093 #6 main-n264334-215bab7924f6-dirty: Wed Aug 2 14:12:14 PDT 2023 root@CA78C-WDK23-ZFS:/usr/obj/BUILDs/main-CA78C-nodbg-clang/usr/main-src/arm64.aarch64/sys/GENERIC-NODBG-CA78C arm64 aarch64 1400093 1400093
>
> I preload various modules (6 are commented out [not preloaded]
> and some listed may be actually built into the kernel):
>
> # grep kldload ~/prekyua-kldloads.sh
> kldload -v -n zfs.ko
> kldload -v -n cryptodev.ko
> kldload -v -n nullfs.ko
> kldload -v -n fdescfs.ko
> kldload -v -n filemon.ko
> kldload -v -n nfsd.ko
> kldload -v -n tarfs.ko
> kldload -v -n xz.ko
> kldload -v -n geom_concat.ko
> kldload -v -n geom_eli.ko
> kldload -v -n geom_nop.ko
> kldload -v -n geom_gate.ko
> kldload -v -n geom_mirror.ko
> kldload -v -n geom_multipath.ko
> kldload -v -n sdt.ko
> kldload -v -n dtrace.ko
> kldload -v -n opensolaris.ko
> kldload -v -n geom_raid3.ko
> kldload -v -n geom_shsec.ko
> kldload -v -n geom_stripe.ko
> kldload -v -n geom_uzip.ko
> kldload -v -n if_epair.ko
> kldload -v -n if_gif.ko
> kldload -v -n if_tuntap.ko
> kldload -v -n if_lagg.ko
> kldload -v -n if_infiniband.ko
> kldload -v -n if_wg.ko
> kldload -v -n ng_socket.ko
> kldload -v -n netgraph.ko
> kldload -v -n ng_hub.ko
> kldload -v -n ng_bridge.ko
> kldload -v -n ng_ether.ko
> kldload -v -n ng_vlan_rotate.ko
> kldload -v -n ipdivert.ko
> kldload -v -n pf.ko
> kldload -v -n if_bridge.ko
> kldload -v -n bridgestp.ko
> kldload -v -n mqueuefs.ko
> kldload -v -n tcpmd5.ko
> kldload -v -n carp.ko
> kldload -v -n sctp.ko
> kldload -v -n if_stf.ko
> kldload -v -n if_ovpn.ko
> kldload -v -n ipsec.ko
> #kldload -v -n ipfw.ko
> #kldload -v -n pflog.ko
> #kldload -v -n pfsync.ko
> kldload -v -n dummynet.ko
> #kldload -v -n mac_bsdextended.ko
> #kldload -v -n mac_ipacl.ko
> #kldload -v -n mac_portacl.ko
>
> armv7 ports built and installed in the armv7 chroot
> area include:
>
> # more ~/origins/kyua-origins.txt
> archivers/gtar
> devel/gdb
> devel/py-pytest
> devel/py-pytest-twisted
> devel/py-twisted
> lang/perl5.32
> lang/python
> net/scapy
> security/nist-kat
> security/openvpn
> security/sudo
> shells/ksh93
> shells/bash
> sysutils/coreutils
> sysutils/sg3_utils
> textproc/jq
>
> (Those cause others to also be installed.)
I tried gdb -p PID against a couple of the processes.
Each got stuck, not reaching the gdb prompt. I also
show a Control-T output:
Attaching to process 17491
load: 0.24 cmd: gdb131 19693 [uwait] 32.27r 0.02u 0.06s 0% 32152k
#0 0xffff00000049fe20 at mi_switch+0xe0
#1 0xffff0000004f3658 at sleepq_catch_signals+0x318
#2 0xffff0000004f3318 at sleepq_wait_sig+0x8
#3 0xffff00000049f410 at _sleep+0x1d0
#4 0xffff0000004b52dc at umtxq_sleep+0x27c
#5 0xffff0000004bab7c at do_wait+0x25c
#6 0xffff0000004b8cdc at __umtx_op_wait_uint_private+0x5c
#7 0xffff0000004b6e64 at sys__umtx_op+0x84
#8 0xffff0000008267d4 at do_el0_sync+0x9b4
#9 0xffff000000805910 at handle_el0_sync+0x44
and:
Attaching to process 17860
load: 0.23 cmd: gdb131 19697 [uwait] 13.14r 0.06u 0.01s 0% 32184k
#0 0xffff00000049fe20 at mi_switch+0xe0
#1 0xffff0000004f3658 at sleepq_catch_signals+0x318
#2 0xffff0000004f3318 at sleepq_wait_sig+0x8
#3 0xffff00000049f410 at _sleep+0x1d0
#4 0xffff0000004b52dc at umtxq_sleep+0x27c
#5 0xffff0000004bab7c at do_wait+0x25c
#6 0xffff0000004b8cdc at __umtx_op_wait_uint_private+0x5c
#7 0xffff0000004b6e64 at sys__umtx_op+0x84
#8 0xffff0000008267d4 at do_el0_sync+0x9b4
#9 0xffff000000805910 at handle_el0_sync+0x44
I was unable to Control-C the gdb's to gain control
but was able to put them in the background (Control-Z
then bg).
===
Mark Millard
marklmi at yahoo.com