[Bug 270648] Panic on FreeBSD-12.4-RELEASE-arm-armv7-WANDBOARD
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Wed, 05 Apr 2023 07:39:47 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=270648
Bug ID: 270648
Summary: Panic on FreeBSD-12.4-RELEASE-arm-armv7-WANDBOARD
Product: Base System
Version: 12.4-RELEASE
Hardware: arm
OS: Any
Status: New
Severity: Affects Many People
Priority: ---
Component: arm
Assignee: freebsd-arm@FreeBSD.org
Reporter: as@tenoware.com
FreeBSD-12.1, 2, 3 work perfectly fine. 12.4 panics on boot.
The image: FreeBSD-12.4-RELEASE-arm-armv7-WANDBOARD.img
U-Boot SPL 2022.04 (Nov 30 2022 - 03:27:09 +0000)
Trying to boot from MMC1
U-Boot 2022.04 (Nov 30 2022 - 03:27:09 +0000)
CPU: Freescale i.MX6Q rev1.3 at 792 MHz
Reset cause: WDOG
DRAM: 2 GiB
Core: 48 devices, 13 uclasses, devicetree: separate
PMIC: PFUZE100 ID=0x10
MMC: FSL_SDHC: 4, FSL_SDHC: 1, FSL_SDHC: 0
Loading Environment from MMC... *** Warning - bad CRC, using default
environment
No panel detected: default to HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Board: Wandboard rev D1
Net: eth0: ethernet@2188000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
MMC: no card present
Scanning disk usdhc@2190000.blk...
Disk usdhc@2190000.blk not ready
Card did not respond to voltage select! : -110
Scanning disk usdhc@2194000.blk...
Disk usdhc@2194000.blk not ready
Scanning disk usdhc@2198000.blk...
Found 3 disks
No EFI system partition
ERROR: invalid device tree
Found EFI removable media binary efi/boot/bootarm.efi
607732 bytes read in 33 ms (17.6 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Booting /efi\boot\bootarm.efi
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm EFI loader, Revision 1.1
Command line arguments: l
Image base: 0x8d4d6000
EFI version: 2.90
EFI Firmware: Das U-Boot (rev 8226.1024)
Console: efi (0x1000)
Load Path: /efi\boot\bootarm.efi
Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(2)/HD(1,0x01,0,0x4000,0x19000)
Trying ESP:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(2)/HD(1,0x01,0,0x4000,0x19000)
Setting currdev to disk0p1:
Trying:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(2)/HD(2,0x01,0,0x1d000,0x5e3000)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
Loading kernel...
/boot/kernel/kernel text=0x1b4 text=0x7354e8 text=0x185b5c data=0xa52f0
data=0x0+0x1f0000 syms=[0x4+0xa7010+0x4+0x109fe0]
Loading configured modules...
/boot/kernel/umodem.ko text=0x14c0 text=0xed0 data=0x22c+0x4
syms=[0x4+0xe10+0x4+0xa4f]
loading required module 'ucom'
/boot/kernel/ucom.ko text=0x1714 text=0x2cbc data=0x3c4+0x838
syms=[0x4+0x13e0+0x4+0xbac]
can't find '/etc/hostid'
can't find '/boot/entropy'
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x17f00000.
Kernel entry at 0x87600200...
Kernel args: (null)
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-RELEASE r372781 GENERIC arm
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git
llvmorg-13.0.0-0-gd7b669b3a303)
VT: init without driver.
CPU: ARM Cortex-A9 r2p10 (ECO: 0x00000000)
CPU Features:
Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
Optional instructions:
UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 4-way instruction cache Read-Alloc
real memory = 2130169856 (2031 MB)
avail memory = 2070831104 (1974 MB)
No PSCI/SMCCC call function found
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random device
because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD
14.0.
ofwbus0: <Open Firmware Device Tree>
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
clk_fixed2: <Fixed clock> on ofw_clkbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on
simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on
simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff
irq 47,48,49 on simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on
simplebus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0x20cc000-0x20cffff on
simplebus1
simple_mfd1: <Simple MFD (Multi-Functions Device)> mem 0x20e0000-0x20e0037 on
simplebus1
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem
0x21bc000-0x21bffff on simplebus3
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 45,46
on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 11 on
simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gic0: <ARM Generic Interrupt Controller> mem
0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x39, arch 0x1, rev 0x2, implementer 0x43b irqs 160
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_epit0: <i.MX EPIT timer> mem 0x20d0000-0x20d3fff irq 52 on simplebus1
Timecounter "EPIT" frequency 66000000 Hz quality 1000
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 10 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
gpio0: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on
simplebus1
gpio0: could not allocate resources
device_attach: gpio0 attach returned 6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on
simplebus1
imx_wdog0: could not allocate resources
device_attach: imx_wdog0 attach returned 6
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on
simplebus1
imx_iomux0: Cannot allocate memory resources
device_attach: imx_iomux0 attach returned 6
sdma0: <i.MX6 Smart Direct Memory Access Controller> mem 0x20ec000-0x20effff
irq 60 on simplebus1
sdma0: could not allocate resources
device_attach: sdma0 attach returned 6
imx_usbmisc0: <i.MX USB Misc Control> mem 0x2184800-0x21849ff on simplebus3
pmu0: <Performance Monitoring Unit> irq 1 on ofwbus0
pmu0: could not allocate resources
device_attach: pmu0 attach returned 6
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 7 on simplebus0
Fatal kernel mode data abort: 'Translation Fault (L1)' on read
trapframe: 0xc0e14ca8
FSR=00000005, FAR=00000004, spsr=600000d3
r0 =00000000, r1 =ffdc4000, r2 =0000000c, r3 =0ffffff3
r4 =c6f7ab80, r5 =c6fab000, r6 =c4f30400, r7 =00000000
r8 =c0b1a498, r9 =c0313604, r10=c078b578, r11=c0e14d38
r12=00000000, ssp=c0e14d38, slr=c06c41cc, pc =c06bc358
panic: Fatal abort
cpuid = 0
time = 1
KDB: stack backtrace:
#0 0xc0321720 at kdb_backtrace+0x48
#1 0xc02cdc68 at vpanic+0x168
#2 0xc02cdb00 at vpanic+0
#3 0xc065fcec at abort_align+0
#4 0xc065f810 at abort_handler+0x2c0
#5 0xc06401e0 at exception_exit+0
#6 0xc06bc358 at imx_iomux_gpr_get+0x18
#7 0xc06c41cc at imx_hdmi_attach+0xf4
#8 0xc030e728 at device_attach+0x4d8
#9 0xc0310980 at bus_generic_new_pass+0x130
#10 0xc0310908 at bus_generic_new_pass+0xb8
#11 0xc0310908 at bus_generic_new_pass+0xb8
#12 0xc0310908 at bus_generic_new_pass+0xb8
#13 0xc031277c at root_bus_configure+0x44
#14 0xc063adec at configure+0xc
#15 0xc025ba68 at mi_startup+0x120
#16 0xc0000344 at _start+0x144
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--
You are receiving this mail because:
You are the assignee for the bug.