BeagleBone uboot: BeagleBone Green Gateway not defined in uboot?
Date: Mon, 24 Oct 2022 19:35:02 UTC
I have tried to boot a Beaglebone Green Gateway via the current GenericSD.img.xz at https://download.freebsd.org/ftp/releases/arm/armv7/ISO-IMAGES/13.0/FreeBSD-13.0-RELEASE-arm-armv7-GENERICSD.img.xz The board booted, but it did not have anything functional in the sense of wland or ethernet. So I installed (after putting the SD-card in a BeagleBone Green, which was able to find an ethernet port and a working internet connection) the beaglebone uboot: ===== pkg install sysutils/u-boot-beaglebone ===== That resulted in the message that there was no device tree: ===== Loading Environment from EXT4... ** Unable to use mmc 0:1 for loading the env ** Board: BeagleBone Black <ethaddr> not set. Validating first E-fuse MAC BeagleBone Black: Model: SeeedStudio BeagleBone Green Gateway: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 0 seconds board_name=[A335BNLT] ... board_rev=[GG1A] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found EFI removable media binary efi/boot/bootarm.efi libfdt fdt_check_header(): FDT_ERR_BADMAGIC <snip> No valid device tree blob found! WARNING! Trying to fire up the kernel, but no device tree blob found! ===== How can I add a device tree blob for the BeagleBone Green Gateway? Kind Regards, Johan Henselmans