From nobody Wed Oct 05 03:46:08 2022 X-Original-To: freebsd-arm@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4Mj0qC5hr2z4V19F; Wed, 5 Oct 2022 03:46:15 +0000 (UTC) (envelope-from fbsd@www.zefox.net) Received: from www.zefox.net (www.zefox.net [50.1.20.27]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (2048 bits) client-digest SHA256) (Client CN "www.zefox.com", Issuer "www.zefox.com" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id 4Mj0q53Z7Sz3lXQ; Wed, 5 Oct 2022 03:46:09 +0000 (UTC) (envelope-from fbsd@www.zefox.net) Received: from www.zefox.net (localhost [127.0.0.1]) by www.zefox.net (8.16.1/8.15.2) with ESMTPS id 2953k8fp013304 (version=TLSv1.3 cipher=TLS_AES_256_GCM_SHA384 bits=256 verify=NO); Tue, 4 Oct 2022 20:46:08 -0700 (PDT) (envelope-from fbsd@www.zefox.net) Received: (from fbsd@localhost) by www.zefox.net (8.16.1/8.15.2/Submit) id 2953k8Co013303; Tue, 4 Oct 2022 20:46:08 -0700 (PDT) (envelope-from fbsd) Date: Tue, 4 Oct 2022 20:46:08 -0700 From: bob prohaska To: Mark Millard Cc: Klaus K??chemann , freebsd-arm@freebsd.org, freebsd-uboot@freebsd.org Subject: Re: u-boot debug, was: Re: U-boot on RPI3, sees disk but won't boot it Message-ID: <20221005034608.GA12761@www.zefox.net> References: <6DB88FC9-629C-43E6-9673-32640FC547F7@yahoo.com> <20221002182049.GA2255@www.zefox.net> <5FFDAA6A-AD8C-4E40-A2EB-4082E5086679@googlemail.com> <38DFEB91-AC60-4FD1-8088-95B0A06C5E5D@yahoo.com> <20221003004624.GA3381@www.zefox.net> <20221004001857.GA7109@www.zefox.net> <62F8D709-BBC3-41C4-B1A9-939B2001BA52@yahoo.com> <1DE565E3-3906-4C53-83C8-EBC20A4E3C95@yahoo.com> List-Id: Porting FreeBSD to ARM processors List-Archive: https://lists.freebsd.org/archives/freebsd-arm List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-arm@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1DE565E3-3906-4C53-83C8-EBC20A4E3C95@yahoo.com> X-Rspamd-Queue-Id: 4Mj0q53Z7Sz3lXQ X-Spamd-Bar: - Authentication-Results: mx1.freebsd.org; dkim=none; dmarc=none; spf=none (mx1.freebsd.org: domain of fbsd@www.zefox.net has no SPF policy when checking 50.1.20.27) smtp.mailfrom=fbsd@www.zefox.net X-Spamd-Result: default: False [-1.10 / 15.00]; AUTH_NA(1.00)[]; NEURAL_HAM_SHORT(-1.00)[-1.000]; NEURAL_HAM_MEDIUM(-1.00)[-1.000]; NEURAL_HAM_LONG(-1.00)[-0.999]; MID_RHS_WWW(0.50)[]; WWW_DOT_DOMAIN(0.50)[]; MIME_GOOD(-0.10)[text/plain]; MLMMJ_DEST(0.00)[freebsd-arm@freebsd.org,freebsd-uboot@freebsd.org]; FREEMAIL_TO(0.00)[yahoo.com]; R_DKIM_NA(0.00)[]; FROM_EQ_ENVFROM(0.00)[]; ASN(0.00)[asn:7065, ipnet:50.1.16.0/20, country:US]; MIME_TRACE(0.00)[0:+]; BLOCKLISTDE_FAIL(0.00)[50.1.20.27:query timed out]; RCVD_COUNT_THREE(0.00)[3]; FREEMAIL_CC(0.00)[googlemail.com,freebsd.org]; FROM_HAS_DN(0.00)[]; MID_RHS_MATCH_FROM(0.00)[]; ARC_NA(0.00)[]; TO_MATCH_ENVRCPT_SOME(0.00)[]; RCPT_COUNT_THREE(0.00)[4]; DMARC_NA(0.00)[zefox.net]; TO_DN_SOME(0.00)[]; R_SPF_NA(0.00)[no SPF record]; RCVD_TLS_LAST(0.00)[] X-ThisMailContainsUnwantedMimeParts: N On Tue, Oct 04, 2022 at 01:25:17AM -0700, Mark Millard wrote: > I found a configuration that gets the RPi3 EDK2 and FreeBSD > combination to have the serial console working. You can try > booting and operating via the RPi3 EDK2 UEFI materials. > EDK2 boots the JMS576 enclosure rather reliably, 13 out of 13 tries succeeded, with no failures. It has more problems with the JMS577 enclosure, failing mountroot, getting to multi-user twice out of six tries. Maybe better to say six interventions from the keyboard. But, seemingly no disk detection failures. I didn't see anything that I recognized as an error message from EDK2. Here's rather long copy-paste of the console: -----------begin console output--------- Resetting system ... Raspberry Pi Bootcode Read File: config.txt, 216 Read File: start.elf, 2967424 (bytes) Read File: fixup.dat, 7216 (bytes) MESS:00:00:01.135470:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:01.139825:0: brfs: File read: 216 bytes MESS:00:00:01.197517:0: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:01.203683:0: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:01.210019:0: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:01.216356:0: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:01.222693:0: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:01.229030:0: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:01.235366:0: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:01.241703:0: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:01.248040:0: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:01.254377:0: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:01.260472:0: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:01.268103:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:01.272414:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined MESS:00:00:02.095665:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined MESS:00:00:02.103201:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined MESS:00:00:02.109130:0: *** Restart logging MESS:00:00:02.113008:0: brfs: File read: 216 bytes MESS:00:00:02.118466:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:02.125624:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:02.132482:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:02.139340:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:02.146197:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:02.153054:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:02.159913:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:02.166770:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:02.173628:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:02.180486:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:02.187101:0: hdmi: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:02.193004:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:02.200797:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:02.207656:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:02.214512:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:02.221371:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:02.228229:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:02.235086:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:02.241944:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:02.248802:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:02.255660:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:02.262275:0: hdmi: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:02.268145:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead MESS:00:00:02.276635:0: HDMI0: hdmi_pixel_encoding: 162000000 MESS:00:00:02.282330:0: vec: vec_middleware_power_on: vec_base: 0x7e806000 rev-id 0x00002708 @ vec: 0x7e806100 @ 0x00000420 enc: 0x7e806060 @ 0x00000220 cgmsae: 0x7e80605c @ 0x00000000 MESS:00:00:02.303727:0: dtb_file 'bcm2710-rpi-3-b.dtb' MESS:00:00:02.313078:0: brfs: File read: /mfs/sd/bcm2710-rpi-3-b.dtb MESS:00:00:02.317741:0: Loading 'bcm2710-rpi-3-b.dtb' to 0x1f0000 size 0x7107 MESS:00:00:02.338301:0: brfs: File read: 28935 bytes MESS:00:00:02.413991:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:02.418020:0: brfs: File read: 216 bytes MESS:00:00:02.426024:0: brfs: File read: /mfs/sd/overlays/disable-bt.dtbo MESS:00:00:02.446619:0: Loaded overlay 'disable-bt' MESS:00:00:02.491185:0: brfs: File read: 1073 bytes MESS:00:00:02.494726:0: Failed to open command line file 'cmdline.txt' MESS:00:00:03.054138:0: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined MESS:00:00:03.249078:0: brfs: File read: /mfs/sd/RPI_EFI.fd MESS:00:00:03.252958:0: Loading 'RPI_EFI.fd' to 0x0 size 0x1f0000 MESS:00:00:03.258784:0: No compatible kernel found MESS:00:00:03.263284:0: Device tree loaded to 0x1f0000 (size 0x75d8) MESS:00:00:03.271038:0: uart: Set PL011 baud rate to 103448.300000 Hz MESS:00:00:03.277330:0: uart: Baud rate change done... MESS:00:00:03.280764:0: uart: Baud rate change done... MESS:00:00:03.286487:0: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined NOTICE: Booting Trusted Firmware NOTICE: BL1: v2.5(release): NOTICE: BL1: Built : 18:50:24, Jun 14 2021 NOTICE: rpi3: Detected: Raspberry Pi 3 Model B (1GB, Sony, UK) [0x00a02082] NOTICE: BL1: Booting BL2 NOTICE: BL2: v2.5(release): NOTICE: BL2: Built : 18:50:18, Jun 14 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v2.5(release): NOTICE: BL31: Built : 18:50:22, Jun 14 2021 UEFI firmware (version UEFI Firmware v1.37 built at 19:07:59 on Oct 19 2021) ESC (setup), F1 (shell), ENTER (boot)......BdsDxe: No bootable option or device was found. BdsDxe: Press any key to enter the Boot Manager Menu. Raspberry Pi 3 Model B BCM2837 (ARM Cortex-A53) 1.20 GHz UEFI Firmware v1.37 1024 MB RAM Select Language Reset > Device Manager > Boot Manager > Boot Maintenance Manager Continue Reset =Select Entry Raspberry Pi Bootcode Read File: config.txt, 216 Read File: start.elf, 2967424 (bytes) Read File: fixup.dat, 7216 (bytes) MESS:00:00:01.126618:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:01.130976:0: brfs: File read: 216 bytes MESS:00:00:01.188663:0: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:01.194829:0: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:01.201165:0: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:01.207502:0: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:01.213839:0: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:01.220176:0: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:01.226513:0: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:01.232850:0: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:01.239186:0: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:01.245523:0: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:01.251619:0: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:01.259178:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:01.263487:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined MESS:00:00:02.086735:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined MESS:00:00:02.094272:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined MESS:00:00:02.100200:0: *** Restart logging MESS:00:00:02.104078:0: brfs: File read: 216 bytes MESS:00:00:02.109534:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:02.116697:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:02.123552:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:02.130410:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:02.137268:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:02.144125:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:02.150983:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:02.157840:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:02.164698:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:02.171556:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:02.178172:0: hdmi: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:02.184074:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:02.191868:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:02.198726:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:02.205584:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:02.212440:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:02.219299:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:02.226157:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:02.233014:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:02.239872:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:02.246730:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:02.253345:0: hdmi: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:02.259213:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead MESS:00:00:02.267705:0: HDMI0: hdmi_pixel_encoding: 162000000 MESS:00:00:02.273400:0: vec: vec_middleware_power_on: vec_base: 0x7e806000 rev-id 0x00002708 @ vec: 0x7e806100 @ 0x00000420 enc: 0x7e806060 @ 0x00000220 cgmsae: 0x7e80605c @ 0x00000000 MESS:00:00:02.294801:0: dtb_file 'bcm2710-rpi-3-b.dtb' MESS:00:00:02.304110:0: brfs: File read: /mfs/sd/bcm2710-rpi-3-b.dtb MESS:00:00:02.308773:0: Loading 'bcm2710-rpi-3-b.dtb' to 0x1f0000 size 0x7107 MESS:00:00:02.329334:0: brfs: File read: 28935 bytes MESS:00:00:02.404919:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:02.408948:0: brfs: File read: 216 bytes MESS:00:00:02.416896:0: brfs: File read: /mfs/sd/overlays/disable-bt.dtbo MESS:00:00:02.437491:0: Loaded overlay 'disable-bt' MESS:00:00:02.482058:0: brfs: File read: 1073 bytes MESS:00:00:02.485599:0: Failed to open command line file 'cmdline.txt' MESS:00:00:03.042457:0: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined MESS:00:00:03.237578:0: brfs: File read: /mfs/sd/RPI_EFI.fd MESS:00:00:03.241459:0: Loading 'RPI_EFI.fd' to 0x0 size 0x1f0000 MESS:00:00:03.247285:0: No compatible kernel found MESS:00:00:03.251784:0: Device tree loaded to 0x1f0000 (size 0x75d8) MESS:00:00:03.259540:0: uart: Set PL011 baud rate to 103448.300000 Hz MESS:00:00:03.265831:0: uart: Baud rate change done... MESS:00:00:03.269265:0: uart: Baud rate change done... MESS:00:00:03.274986:0: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined NOTICE: Booting Trusted Firmware NOTICE: BL1: v2.5(release): NOTICE: BL1: Built : 18:50:24, Jun 14 2021 NOTICE: rpi3: Detected: Raspberry Pi 3 Model B (1GB, Sony, UK) [0x00a02082] NOTICE: BL1: Booting BL2 NOTICE: BL2: v2.5(release): NOTICE: BL2: Built : 18:50:18, Jun 14 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v2.5(release): NOTICE: BL31: Built : 18:50:22, Jun 14 2021 UEFI firmware (version UEFI Firmware v1.37 built at 19:07:59 on Oct 19 2021) ESC (setup), F1 (shell), ENTER (boot)...... Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk1p1: FreeBSD/arm64 EFI loader, Revision 1.1 Command line arguments: loader.efi Image base: 0x33843000 EFI version: 2.70 EFI Firmware: https://github.com/pftf/RPi3 (rev 1.00) Console: efi (0x1000) Load Path: \EFI\BOOT\BOOTAA64.EFI Load Device: VenHw(4BF1704C-03F4-46D5-BCA6-82FA580BADFD)/USB(0x0,0x0)/USB(0x1 ,0x0)/USB(0x3,0x0)/HD(1,MBR,0xF4C26069,0x81F,0x18FA8) BootCurrent: 0002 BootOrder: 0000 0001 0002[*] BootInfo Path: VenHw(58ABD787-F64D-4CA2-A034-B9AC2D5AD0CF) Ignoring Boot0002: Only one DP found Trying ESP: VenHw(4BF1704C-03F4-46D5-BCA6-82FA580BADFD)/USB(0x0,0x0)/USB(0x1,0x0 )/USB(0x3,0x0)/HD(1,MBR,0xF4C26069,0x81F,0x18FA8) Setting currdev to disk1p1: Trying: VenHw(4BF1704C-03F4-46D5-BCA6-82FA580BADFD)/USB(0x0,0x0)/USB(0x1,0x0)/US B(0x3,0x0)/HD(2,MBR,0xF4C26069,0x197C7,0x746ED5E9) Setting currdev to disk1p2: Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local Loading kernel... /boot/kernel/kernel text=0x2a8 text=0x8ae560 text=0x20576c data=0x1ab418 data=0x 0+0x2a9000 syms=[0x8+0x123228+0x8+0x146f0d] Loading configured modules... /boot/entropy size=0x1000 /boot/kernel/filemon.ko text=0x1574 text=0x272c data=0x500+0x20 syms=[0x8+0xcd8+ 0x8+0x7c5] /boot/kernel/umodem.ko text=0x2060 text=0x1330 data=0x6c8+0x10 syms=[0x8+0xee8+0 x8+0xb42] loading required module 'ucom' /boot/kernel/ucom.ko text=0x249f text=0x3380 data=0x8a0+0x858 syms=[0x8+0x1188+0 x8+0xb19] /etc/hostid size=0x25 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... Using DTB provided by EFI at 0x35c27000. EFI framebuffer information: addr, size 0x3eaa9000, 0x151800 dimensions 720 x 480 stride 720 masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 ---<>--- WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-STABLE #28 stable/13-5472eacf5: Sat Oct 1 04:04:29 PDT 2022 root@pelorus.zefox.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) VT(efifb): resolution 720x480 module firmware already present! real memory = 989626368 (943 MB) avail memory = 937533440 (894 MB) Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface MAP 1d0000 mode 2 pages 32 MAP 339d0000 mode 2 pages 80 MAP 33a20000 mode 2 pages 256 MAP 37000000 mode 2 pages 400 MAP 37190000 mode 2 pages 592 kbd0 at kbdmux0 ofwbus0: simplebus0: on ofwbus0 ofw_clkbus0: on ofwbus0 clk_fixed0: on ofw_clkbus0 clk_fixed1: on ofw_clkbus0 regfix0: on ofwbus0 regfix1: on ofwbus0 bcm2835_firmware0: on simplebus0 ofw_clkbus1: on bcm2835_firmware0 psci0: on ofwbus0 lintc0: mem 0x40000000-0x400000ff on simplebus0 intc0: mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0 gpio0: mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0 gpiobus0: on gpio0 gpio1: on bcm2835_firmware0 gpiobus1: on gpio1 mbox0: mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0 generic_timer0: irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 usb_nop_xceiv0: on ofwbus0 efirtc0: efirtc0: registered as a time-of-day clock, resolution 1.000000s bcm2835_clkman0: mem 0x7e101000-0x7e102fff on simplebus0 gpioc0: on gpio0 uart0: mem 0x7e201000-0x7e2011ff irq 9 on simplebus0 uart0: console (115200,n,8,1) sdhost_bcm0: mem 0x7e202000-0x7e2020ff irq 10 on simplebus0 sdhost_bcm0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. mmc0: on sdhost_bcm0 bcm283x_dwcotg0: mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0 usbus1 on bcm283x_dwcotg0 bcm_dma0: mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0 bcmwd0: mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0 bcmrng0: mem 0x7e104000-0x7e10400f irq 40 on simplebus0 sdhci_bcm0: mem 0x7e300000-0x7e3000ff irq 49 on simplebus0 mmc1: on sdhci_bcm0 gpioc1: on gpio1 fb0: on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "efifb" with new "fb". fb0: 720x480(720x480@0,0) 32bpp fb0: fbswap: 1, pitch 2880, base 0x3eaa9000, screen_size 1382400 pmu0: irq 0 on ofwbus0 cpulist0: on ofwbus0 cpu0: on cpulist0 bcm2835_cpufreq0: on cpu0 cpu1: on cpulist0 cpu2: on cpulist0 cpu3: on cpulist0 gpioled0: on ofwbus0 gpioled0: failed to map pin armv8crypto0: CPU lacks AES instructions Timecounters tick every 1.000 msec usbus1: 480Mbps High Speed USB v2.0 mmcsd0: 32GB at mmc0 50.0MHz/4bit/65535-block ugen1.1: at usbus1 uhub0 on usbus1 uhub0: on usbus1 mmc1: No compatible cards found on bus bcm2835_cpufreq0: ARM 1200MHz, Core 250MHz, SDRAM 400MHz, Turbo ON CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = Instruction Set Attributes 1 = <> Trying to mount root from ufs:/dev/da0s2a [rw]... Instruction Set Attributes 2 = <> Processor Features 0 = Processor Features 1 = <> Memory Model Features 0 = Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> AArch32 Instruction Set Attributes 5 = AArch32 Media and VFP Features 0 = AArch32 Media and VFP Features 1 = CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 Release APs...done uhub0: 1 port with 1 removable, self powered ugen1.2: at usbus1 uhub1 on uhub0 uhub1: on usbus1 uhub1: MTT enabled Root mount waiting for: usbus1 uhub1: 5 ports with 4 removable, self powered ugen1.3: at usbus1 smsc0 on uhub1 smsc0: on usbus1 smsc0: chip 0xec00, rev. 0002 miibus0: on smsc0 smscphy0: PHY 1 on miibus0 smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ue0: on smsc0 ue0: Ethernet address: b8:27:eb:ba:68:d5 Root mount waiting for: usbus1 ugen1.4: at usbus1 uhub2 on uhub1 uhub2: on usbus1 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device JMicron USB Mass Storage (0x152d:0x0577) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device JMicron USB Mass Storage (0x152d:0x0577) usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) Root mount waiting for: usbus1 Root mount waiting for: usbus1 usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_IOERROR Root mount waiting for: usbus1 ugen1.5: at usbus1 umass0 on uhub2 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:0:0: Attached to scbus0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SPC-4 SCSI device da0: Serial Number DD564198838F9 da0: 40.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors) da0: quirks=0x2 ugen1.6: at usbus1 ugen1.5: at usbus1 (disconnected) umass0: at uhub2, port 4, addr 5 (disconnected) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 74 70 6d af 00 00 01 00 (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (da0:umass-sim0:0:0:0): Retrying command, 3 more tries remain da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: s/n DD564198838F9 detached g_dev_taste: g_dev_taste(da0) failed to g_attach, error=6 (da0:umass-sim0:0:0:0): Periph destroyed umass0: detached mountroot: waiting for device /dev/da0s2a... usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device JMicron USB Mass Storage (0x152d:0x0577) usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device JMicron USB Mass Storage (0x152d:0x0577) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device JMicron USB Mass Storage (0x152d:0x0577) usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_IOERROR, ignored) Mounting from ufs:/dev/da0s2a failed with error 19. Loader variables: vfs.root.mountfrom=ufs:/dev/da0s2a vfs.root.mountfrom.options=rw Manual root filesystem specification: : [options] Mount using filesystem and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:zroot/ROOT/default cd9660:/dev/cd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) Abort manual input mountroot> usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_IOERROR ugen1.5: at usbus1 umass0 on uhub2 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x8101 umass0:0:0: Attached to scbus0 ugen1.5: at usbus1 (disconnected) umass0: at uhub2, port 4, addr 5 (disconnected) (da0:umass-sim0:0:0:0): got CAM status 0xa (da0:umass-sim0:0:0:0): fatal error, failed to attach to device umass0: detached usb_alloc_device: set address 5 failed (USB_ERR_TIMEOUT, ignored) ugen1.5: at usbus1 umass0 on uhub2 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0: Attached to scbus0 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SPC-4 SCSI device da0: Serial Number DD564198838F9 da0: 40.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors) da0: quirks=0x2 panic: mountroot: unable to (re-)mount root. cpuid = 1 time = 34 KDB: stack backtrace: #0 0xffff0000004fb6d4 at kdb_backtrace+0x60 #1 0xffff0000004a6da0 at vpanic+0x13c #2 0xffff0000004a6c60 at panic+0x44 #3 0xffff000000595ac4 at vfs_mountroot+0x1e18 #4 0xffff00000041ebc4 at start_init+0x28 #5 0xffff000000455dcc at fork_exit+0x88 #6 0xffff0000007e56f4 at fork_trampoline+0x14 Uptime: 34s Resetting system ... Raspberry Pi Bootcode Read File: config.txt, 216 Read File: start.elf, 2967424 (bytes) Read File: fixup.dat, 7216 (bytes) MESS:00:00:01.102818:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:01.107176:0: brfs: File read: 216 bytes MESS:00:00:01.164875:0: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:01.171042:0: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:01.177377:0: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:01.183714:0: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:01.190051:0: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:01.196388:0: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:01.202725:0: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:01.209061:0: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:01.215398:0: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:01.221735:0: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:01.227831:0: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:01.235446:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:01.239756:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined MESS:00:00:02.063000:0: gpioman: gpioman_get_pin_num: pin DISPLAY_DSI_PORT not defined MESS:00:00:02.070535:0: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined MESS:00:00:02.076465:0: *** Restart logging MESS:00:00:02.080342:0: brfs: File read: 216 bytes MESS:00:00:02.085802:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:02.092959:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:02.099817:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:02.106675:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:02.113532:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:02.120390:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:02.127248:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:02.134105:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:02.140962:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:02.147820:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:02.154436:0: hdmi: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:02.160339:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0 MESS:00:00:02.168132:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1 MESS:00:00:02.174991:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2 MESS:00:00:02.181848:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3 MESS:00:00:02.188706:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4 MESS:00:00:02.195564:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5 MESS:00:00:02.202421:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6 MESS:00:00:02.209278:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7 MESS:00:00:02.216137:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8 MESS:00:00:02.222994:0: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9 MESS:00:00:02.229610:0: hdmi: HDMI0:EDID giving up on reading EDID block 0 MESS:00:00:02.235477:0: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead MESS:00:00:02.243970:0: HDMI0: hdmi_pixel_encoding: 162000000 MESS:00:00:02.249665:0: vec: vec_middleware_power_on: vec_base: 0x7e806000 rev-id 0x00002708 @ vec: 0x7e806100 @ 0x00000420 enc: 0x7e806060 @ 0x00000220 cgmsae: 0x7e80605c @ 0x00000000 MESS:00:00:02.271063:0: dtb_file 'bcm2710-rpi-3-b.dtb' MESS:00:00:02.280447:0: brfs: File read: /mfs/sd/bcm2710-rpi-3-b.dtb MESS:00:00:02.285110:0: Loading 'bcm2710-rpi-3-b.dtb' to 0x1f0000 size 0x7107 MESS:00:00:02.305670:0: brfs: File read: 28935 bytes MESS:00:00:02.381368:0: brfs: File read: /mfs/sd/config.txt MESS:00:00:02.385397:0: brfs: File read: 216 bytes MESS:00:00:02.393415:0: brfs: File read: /mfs/sd/overlays/disable-bt.dtbo MESS:00:00:02.414010:0: Loaded overlay 'disable-bt' MESS:00:00:02.458575:0: brfs: File read: 1073 bytes MESS:00:00:02.462115:0: Failed to open command line file 'cmdline.txt' MESS:00:00:03.023262:0: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined MESS:00:00:03.218252:0: brfs: File read: /mfs/sd/RPI_EFI.fd MESS:00:00:03.222132:0: Loading 'RPI_EFI.fd' to 0x0 size 0x1f0000 MESS:00:00:03.227957:0: No compatible kernel found MESS:00:00:03.232458:0: Device tree loaded to 0x1f0000 (size 0x75d8) MESS:00:00:03.240223:0: uart: Set PL011 baud rate to 103448.300000 Hz MESS:00:00:03.246515:0: uart: Baud rate change done... MESS:00:00:03.249949:0: uart: Baud rate change done... MESS:00:00:03.255665:0: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined NOTICE: Booting Trusted Firmware NOTICE: BL1: v2.5(release): NOTICE: BL1: Built : 18:50:24, Jun 14 2021 NOTICE: rpi3: Detected: Raspberry Pi 3 Model B (1GB, Sony, UK) [0x00a02082] NOTICE: BL1: Booting BL2 NOTICE: BL2: v2.5(release): NOTICE: BL2: Built : 18:50:18, Jun 14 2021 NOTICE: BL1: Booting BL31 NOTICE: BL31: v2.5(release): NOTICE: BL31: Built : 18:50:22, Jun 14 2021 UEFI firmware (version UEFI Firmware v1.37 built at 19:07:59 on Oct 19 2021) ESC (setup), F1 (shell), ENTER (boot)...... Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk1p1: FreeBSD/arm64 EFI loader, Revision 1.1 Command line arguments: loader.efi Image base: 0x33843000 EFI version: 2.70 EFI Firmware: https://github.com/pftf/RPi3 (rev 1.00) Console: efi (0x1000) Load Path: \EFI\BOOT\BOOTAA64.EFI Load Device: VenHw(4BF1704C-03F4-46D5-BCA6-82FA580BADFD)/USB(0x0,0x0)/USB(0x1 ,0x0)/USB(0x3,0x0)/HD(1,MBR,0xF4C26069,0x81F,0x18FA8) BootCurrent: 0002 BootOrder: 0000 0001 0002[*] BootInfo Path: VenHw(58ABD787-F64D-4CA2-A034-B9AC2D5AD0CF) Ignoring Boot0002: Only one DP found Trying ESP: VenHw(4BF1704C-03F4-46D5-BCA6-82FA580BADFD)/USB(0x0,0x0)/USB(0x1,0x0 )/USB(0x3,0x0)/HD(1,MBR,0xF4C26069,0x81F,0x18FA8) Setting currdev to disk1p1: Trying: VenHw(4BF1704C-03F4-46D5-BCA6-82FA580BADFD)/USB(0x0,0x0)/USB(0x1,0x0)/US B(0x3,0x0)/HD(2,MBR,0xF4C26069,0x197C7,0x746ED5E9) Setting currdev to disk1p2: Loading /boot/defaults/loader.conf Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local Loading kernel... /boot/kernel/kernel text=0x2a8 text=0x8ae560 text=0x20576c data=0x1ab418 data=0x 0+0x2a9000 syms=[0x8+0x123228+0x8+0x146f0d] Loading configured modules... /etc/hostid size=0x25 /boot/kernel/filemon.ko text=0x1574 text=0x272c data=0x500+0x20 syms=[0x8+0xcd8+ 0x8+0x7c5] /boot/kernel/umodem.ko text=0x2060 text=0x1330 data=0x6c8+0x10 syms=[0x8+0xee8+0 x8+0xb42] loading required module 'ucom' /boot/kernel/ucom.ko text=0x249f text=0x3380 data=0x8a0+0x858 syms=[0x8+0x1188+0 x8+0xb19] /boot/entropy size=0x1000 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... Using DTB provided by EFI at 0x35c27000. EFI framebuffer information: addr, size 0x3eaa9000, 0x151800 dimensions 720 x 480 stride 720 masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 ---<>--- WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.1-STABLE #28 stable/13-5472eacf5: Sat Oct 1 04:04:29 PDT 2022 root@pelorus.zefox.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) VT(efifb): resolution 720x480 module firmware already present! real memory = 989626368 (943 MB) avail memory = 937533440 (894 MB) Starting CPU 1 (1) Starting CPU 2 (2) Starting CPU 3 (3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs random: unblocking device. random: entropy device external interface MAP 1d0000 mode 2 pages 32 MAP 339d0000 mode 2 pages 80 MAP 33a20000 mode 2 pages 256 MAP 37000000 mode 2 pages 400 MAP 37190000 mode 2 pages 592 kbd0 at kbdmux0 ofwbus0: simplebus0: on ofwbus0 ofw_clkbus0: on ofwbus0 clk_fixed0: on ofw_clkbus0 clk_fixed1: on ofw_clkbus0 regfix0: on ofwbus0 regfix1: on ofwbus0 bcm2835_firmware0: on simplebus0 ofw_clkbus1: on bcm2835_firmware0 psci0: on ofwbus0 lintc0: mem 0x40000000-0x400000ff on simplebus0 intc0: mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0 gpio0: mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0 gpiobus0: on gpio0 gpio1: on bcm2835_firmware0 gpiobus1: on gpio1 mbox0: mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0 generic_timer0: irq 1,2,3,4 on ofwbus0 Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000 Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000 usb_nop_xceiv0: on ofwbus0 efirtc0: efirtc0: registered as a time-of-day clock, resolution 1.000000s bcm2835_clkman0: mem 0x7e101000-0x7e102fff on simplebus0 gpioc0: on gpio0 uart0: mem 0x7e201000-0x7e2011ff irq 9 on simplebus0 uart0: console (115200,n,8,1) sdhost_bcm0: mem 0x7e202000-0x7e2020ff irq 10 on simplebus0 sdhost_bcm0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. mmc0: on sdhost_bcm0 bcm283x_dwcotg0: mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0 usbus1 on bcm283x_dwcotg0 bcm_dma0: mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0 bcmwd0: mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0 bcmrng0: mem 0x7e104000-0x7e10400f irq 40 on simplebus0 sdhci_bcm0: mem 0x7e300000-0x7e3000ff irq 49 on simplebus0 mmc1: on sdhci_bcm0 gpioc1: on gpio1 fb0: on simplebus0 fb0: keeping existing fb bpp of 32 fbd0 on fb0 WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 14.0. VT: Replacing driver "efifb" with new "fb". fb0: 720x480(720x480@0,0) 32bpp fb0: fbswap: 1, pitch 2880, base 0x3eaa9000, screen_size 1382400 pmu0: irq 0 on ofwbus0 cpulist0: on ofwbus0 cpu0: on cpulist0 bcm2835_cpufreq0: on cpu0 cpu1: on cpulist0 cpu2: on cpulist0 cpu3: on cpulist0 gpioled0: on ofwbus0 gpioled0: failed to map pin armv8crypto0: CPU lacks AES instructions Timecounters tick every 1.000 msec usbus1: 480Mbps High Speed USB v2.0 mmcsd0: 32GB at mmc0 50.0MHz/4bit/65535-block ugen1.1: at usbus1 uhub0 on usbus1 uhub0: on usbus1 mmc1: No compatible cards found on bus bcm2835_cpufreq0: ARM 1200MHz, Core 250MHz, SDRAM 400MHz, Turbo ON CPU 0: ARM Cortex-A53 r0p4 affinity: 0 Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> Instruction Set Attributes 0 = Trying to mount root from ufs:/dev/da0s2a [rw]... Instruction Set Attributes 1 = <> Instruction Set Attributes 2 = <> Processor Features 0 = Processor Features 1 = <> Memory Model Features 0 = Memory Model Features 1 = <8bit VMID> Memory Model Features 2 = <32bit CCIDX,48bit VA> Debug Features 0 = Debug Features 1 = <> Auxiliary Features 0 = <> Auxiliary Features 1 = <> AArch32 Instruction Set Attributes 5 = AArch32 Media and VFP Features 0 = AArch32 Media and VFP Features 1 = CPU 1: ARM Cortex-A53 r0p4 affinity: 1 CPU 2: ARM Cortex-A53 r0p4 affinity: 2 CPU 3: ARM Cortex-A53 r0p4 affinity: 3 Release APs...done uhub0: 1 port with 1 removable, self powered ugen1.2: at usbus1 uhub1 on uhub0 uhub1: on usbus1 uhub1: MTT enabled Root mount waiting for: usbus1 uhub1: 5 ports with 4 removable, self powered ugen1.3: at usbus1 smsc0 on uhub1 smsc0: on usbus1 smsc0: chip 0xec00, rev. 0002 miibus0: on smsc0 smscphy0: PHY 1 on miibus0 smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ue0: on smsc0 ue0: Ethernet address: b8:27:eb:ba:68:d5 Root mount waiting for: usbus1 ugen1.4: at usbus1 uhub2 on uhub1 uhub2: on usbus1 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device JMicron USB Mass Storage (0x152d:0x0577) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device JMicron USB Mass Storage (0x152d:0x0577) Root mount waiting for: usbus1 ugen1.5: at usbus1 umass0 on uhub2 umass0: on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:0:0: Attached to scbus0 ugen1.6: at usbus1 Root mount waiting for: da da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: Fixed Direct Access SPC-4 SCSI device da0: Serial Number DD564198838F9 da0: 40.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors) da0: quirks=0x2 Dual Console: Serial Primary, Video Secondary Setting hostuuid: 30303030-3030-3030-3064-626136386435. Setting hostid: 0x5cd40a6a. warning: total configured swap (2097152 pages) exceeds maximum recommended amount (916632 pages). warning: increase kern.maxswzone or reduce amount of swap. Starting file system checks: /dev/da0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s2a: clean, 615063 free (1415 frags, 76706 blocks, 0.2% fragmentation) /dev/da0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s2d: clean, 221933849 free (156689 frags, 27722145 blocks, 0.1% fragmentation) Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/graphviz /usr/local/lib/perl5/5.32/mach/CORE Setting hostname: pelorus.zefox.org. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . lo0: link state changed to UP smsc0: chip 0xec00, rev. 0002 ue0: link state changed to DOWN ue0: link state changed to UP Starting Network: lo0 ue0. lo0: flags=8049 metric 0 mtu 16384 options=680003 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21 ue0: flags=8843 metric 0 mtu 1500 options=80009 ether b8:27:eb:ba:68:d5 inet 50.1.20.24 netmask 0xffffff00 broadcast 50.1.20.255 media: Ethernet autoselect (100baseTX ) status: active nd6 options=29 Starting devd. Autoloading module: uftdi uftdi0 on uhub1 uftdi0: on usbus1 add host 127.0.0.1: gateway lo0 fib 0: route already in table add net default: gateway 50.1.20.1 add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Updating /var/run/os-release done. Creating and/or trimming log files. Clearing /tmp (X related). Updating motd:. Starting syslogd. Setting date via ntp. 4 Oct 20:15:39 ntpdate[806]: step time server 165.140.142.118 offset +30244085.121417 sec Starting powerd. Mounting late filesystems:. Performing sanity check on sshd configuration. Starting sshd. Starting cron. Starting sendmail. Starting sendmail_msp_queue. Configuring vt: blanktime. Performing sanity check on apache24 configuration: Syntax OK Starting apache24. Starting background file system checks in 60 seconds. Tue Oct 4 20:15:42 PDT FreeBSD/arm64 (pelorus.zefox.org) (ttyu0) login: root Password: Oct 4 20:15:57 pelorus login[933]: ROOT LOGIN (root) ON ttyu0 Last login: Tue Oct 4 20:11:59 on ttyu0 FreeBSD 13.1-STABLE #28 stable/13-5472eacf5: Sat Oct 1 04:04:29 PDT 2022 root@pelorus.zefox.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC Welcome to FreeBSD! Release Notes, Errata: https://www.FreeBSD.org/releases/ Security Advisories: https://www.FreeBSD.org/security/ FreeBSD Handbook: https://www.FreeBSD.org/handbook/ FreeBSD FAQ: https://www.FreeBSD.org/faq/ Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/ FreeBSD Forums: https://forums.FreeBSD.org/ Documents installed with the system are in the /usr/local/share/doc/freebsd/ directory, or can be installed later with: pkg install en-freebsd-doc For other languages, replace "en" with a language code like de or fr. Show the version of FreeBSD installed: freebsd-version ; uname -a Please include that output and any error messages when posting questions. Introduction to manual pages: man man FreeBSD directory layout: man hier To change this login announcement, see motd(5). root@pelorus:~ # cd /usr/src root@pelorus:/usr/src # git pull remote: Enumerating objects: 79851, done. remote: Counting objects: 100% (79851/79851), done. remote: Compressing objects: 100% (19406/19406), done. remote: Total 79382 (delta 61209), reused 76702 (delta 59557), pack-reused 0 Receiving objects: 100% (79382/79382), 47.48 MiB | 1.16 MiB/s, done. Resolving deltas: 100% (61209/61209), completed with 412 local objects. From https://git.freebsd.org/src 5472eacf5..5ec288b57 stable/13 -> origin/stable/13 Updating 5472eacf5..5ec288b57 Updating files: 100% (280/280), done. Fast-forward ----end console output------- At this point I decided to run an overnight buildworld/kernel to see how the disk behaves under load. > The above actually boots via a default setting that likely > should be replaced. The related menu/field nesting is: > > Device Manager > Raspberry Pi Configuration > Advanced Configuration > System Table Selection > > Picking just Devicetree instead, then saving, and then > exiting the nested menus via a sequence of Escape key > presses, until back to the initial display, one can > then select Reset and it will start over based on the > new setting. The save actually updates an area in the > RPI_EFI.fd file. > I'll try that after the new kernel/userland is installed. Is it likely to affect the mountroot issue? Thank you _very_ much! bob prohaska