Re: u-boot debug, was: Re: U-boot on RPI3, sees disk but won't boot it

On Sun, Oct 02, 2022 at 07:30:57PM -0700, Mark Millard wrote:
> On 2022-Oct-2, at 17:46, bob prohaska <fbsd@www.zefox.net> wrote:
> 
> > 
> > The more troublesome bridge contains a JMS577 chip, the less troublesome JMS576.
> 
> I'm confused. The logs I have show 0x0583 (earlier) and 0x577 (later).
> I'm not aware of a 0x0576 example in the set at all.
> 
> (The JMS??? naming and the 0x0??? product ID's normally match for
> the ??? part.)
> 
On close inspection the enclosure recognized as  0x152d:0x583 
contains the JMS576 chip. That's the better-behaved one.

The enclosure recognized as 0x152d:0x0577 contains a JMS577 chip,
that's the worse-behaved unit. 

It looks like the first two EC-UASP enclosures purchased (which both 
work fine on RPi4's) report 152d:1561. They are clearly different, 
with crystal cans on the circuit boards.  

The two units we're fiddling with presently came much later, under 
the same product description.  


> 
> I'll note that I've reverted my active environment back to
> its normal content. I've not figured out a way to get
> reasonable evidence, given the combinations we have observed.

Understood. 
 
> I'll note that RPi3 EDK2 UEFI is not an option as far as I
> know. I've never had it work for two things that I checked
> up front:
> 

I take it that EDK2 is a tool for _writing_ bootloaders,
not a bootloader itself; is that correct? 

Thank you for all you help, I'm sorry it's turning
into such a snipe hunt.

bob prohaska