From nobody Fri Nov 18 15:45:26 2022 X-Original-To: freebsd-arm@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4NDLht6dlPz4hjP5 for ; Fri, 18 Nov 2022 15:45:34 +0000 (UTC) (envelope-from mike@karels.net) Received: from mail.karels.net (mail.karels.net [216.160.39.52]) by mx1.freebsd.org (Postfix) with ESMTP id 4NDLht39lzz3xSB for ; Fri, 18 Nov 2022 15:45:34 +0000 (UTC) (envelope-from mike@karels.net) Authentication-Results: mx1.freebsd.org; none Received: from mail.karels.net (localhost [127.0.0.1]) by mail.karels.net (8.16.1/8.16.1) with ESMTP id 2AIFjRQ5057892; Fri, 18 Nov 2022 09:45:27 -0600 (CST) (envelope-from mike@karels.net) Received: from [10.0.2.130] ([10.0.1.1]) by mail.karels.net with ESMTPSA id ZoEDD5eod2Mi4gAA4+wvSQ (envelope-from ); Fri, 18 Nov 2022 09:45:27 -0600 From: Mike Karels To: John-Mark Gurney Cc: freebsd-arm@freebsd.org Subject: Re: adding swap when expanding root filesystem Date: Fri, 18 Nov 2022 09:45:26 -0600 X-Mailer: MailMate (1.14r5921) Message-ID: <21BE16D1-0E58-4771-B6DD-7B2EAC6665C5@karels.net> In-Reply-To: <20221118010348.GG3414@funkthat.com> References: <202211071610.2A7GAcHl090048@mail.karels.net> <20221118010348.GG3414@funkthat.com> List-Id: Porting FreeBSD to ARM processors List-Archive: https://lists.freebsd.org/archives/freebsd-arm List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-arm@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-MIME-Autoconverted: from 8bit to quoted-printable by mail.karels.net id 2AIFjRQ5057892 X-Rspamd-Queue-Id: 4NDLht39lzz3xSB X-Spamd-Bar: ---- X-Spamd-Result: default: False [-4.00 / 15.00]; REPLY(-4.00)[]; ASN(0.00)[asn:209, ipnet:216.160.36.0/22, country:US] X-Rspamd-Pre-Result: action=no action; module=replies; Message is reply to one we originated X-ThisMailContainsUnwantedMimeParts: N On 17 Nov 2022, at 19:03, John-Mark Gurney wrote: > Mike Karels wrote this message on Mon, Nov 07, 2022 at 10:10 -0600: >> This question is not really arm-specific, but I couldn't think of a be= tter >> mailing list for it. >> >> There are peridic issues reported on small systems like Raspberry Pi >> where people are running buildworld or poudriere and running out of >> memory. As the user gets no control over the disk layout when install= ing, >> there is no option to add swap space on the install image. I have add= ed >> swap space on a USB disk, but this is often not an option. It occurre= d >> to me that it might be reasonable to add swap space before expanding >> the root filesystem if there is sufficient space. I have a prototype, > > So, if you boot to single user mode, before growfs runs on first boot, > you can manually add a swap partition at the end of the disk. > > You'll need to gpart recover the disk first, so that the gpt (iirc) > covers the remaining disk, and then add a swap partition at the end. > This'll take a bit of math, but isn't too hard. Right, that=E2=80=99s what my prototype does (as part of the growfs scrip= t). >> and wondered if this is a good thing to do. Granted, this will often >> create swap on microSD, which is not optimal, but probably better than >> nothing. > > The other option is to use a swap file as outlined in the handbook: > https://docs.freebsd.org/en/books/handbook/config/#create-swapfile > >> The current prototype creates a swap partition which is 1/10 of the di= sk >> if the disk is at least 15 GB and the initial root partition is no mor= e >> than 1/3 of the disk, but only up to 1.5x of physical memory. I would >> probably enable this by default, but provide a way to disable it via a >> kenv variable and/or a variable in /etc/rc.conf. > > I would like to see the ability to drop a file on the FAT file system > so that the system can be configured at first boot w/o requiring someon= e > to either boot to single user mode, or have a FreeBSD system. This isn= 't > too hard, as I have a review already open for it: > https://reviews.freebsd.org/D26713 > > It makes use of cpercival's cloud init, but slightly modified so it loo= ks > on the fat file system that most arm images have. > > with this, it wouldn't be too hard to gin up some commands to automatic= ally > add the swap partition on first boot, but until something like this is > done, it has to be done manually. I like the config script idea, but it runs after the root file system is mounted read/write, and growfs runs before that. Meanwhile, I have added the ability to suppress swap space, or set its size, via either /etc/rc.c= onf or kernel environment. I will probably have something ready for review s= oon. Meanwhile, if anyone wants to test (especially on GPT), let me know. Mike > --=20 > John-Mark Gurney Voice: +1 415 225 5579 > > "All that I will do, has been done, All that I have, has not."