Re: RBPI4B+ 2GB using FreeBSD 13.1 RC1

From: Stefan Parvu <sparvu_at_kronometrix.org>
Date: Wed, 16 Mar 2022 18:04:53 UTC 
> Interesting. If you're building the kernel from scratch, deleting the entire contents of MAKEOBJDIRPREFIX directory before a rebuilding helped at one point. Also, maybe try copying in the latest pkg firmware and rpi4 u-boot versions. Here's what I do after mounting the sd card to /mnt ...

Right. Probable I wont try to rebuild the kernel on this. But I must try to copy latest
pkg firmware and rpi4 uboot pkg. Any ideas where should I get these from ? 

Then I should probable do the below !?

> 
> u-boot-rpi4-2021.07_1:
> 
> cp /usr/local/share/u-boot/u-boot-rpi-arm64/u-boot.bin /mnt/boot/msdos/u-boot.bin
> 
> rpi-firmware-1.20210303.g20210303:
> 
> cp /usr/local/share/rpi-firmware/armstub8-gic.bin /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/armstub8.bin /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/bcm2710-rpi-2-b.dtb /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/bcm2710-rpi-3-b-plus.dtb /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/bcm2710-rpi-3-b.dtb /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/bcm2711-rpi-4-b.dtb /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/bootcode.bin /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/fixup* /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/start* /mnt/boot/msdos/
> cp /usr/local/share/rpi-firmware/overlays/disable-bt.dtbo /mnt/boot/msdos/overlays/
> cp /usr/local/share/rpi-firmware/overlays/mmc.dtbo /mnt/boot/msdos/overlays/
> cp /usr/local/share/rpi-firmware/overlays/pwm.dtbo /mnt/boot/msdos/overlays/
> cp /usr/local/share/u-boot/u-boot-rpi-arm64/u-boot.bin /mnt/boot/msdos/u-boot.bin
> 

Stefan