freebsd-arm@FreeBSD.org

Porting FreeBSD to ARM processors

Go to: [ monthly archives ] [ by author ] [ by date ]

July 2022 Archives by thread

RPI4 + ntpdate + unbound: John Kennedy (Sat, 02 Jul 2022 04:02:05 UTC)

Re: RPI4 + ntpdate + unbound: David Cornejo (Sat, 02 Jul 2022 08:49:33 UTC)

Re: RPI4 + ntpdate + unbound: John Kennedy (Sun, 03 Jul 2022 15:51:26 UTC)

Re: RPI4 + ntpdate + unbound: Bakul Shah (Sun, 03 Jul 2022 17:55:11 UTC)
Re: RPI4 + ntpdate + unbound: Dr. Rolf Jansen (Sun, 03 Jul 2022 18:22:29 UTC)

Re: RPI4 + ntpdate + unbound: Mark Millard (Sun, 03 Jul 2022 19:11:31 UTC)

Re: RPI4 + ntpdate + unbound: Peter Jeremy (Wed, 06 Jul 2022 09:47:34 UTC)

set timestamp from ZFS-root - (was: Re: RPI4 + ntpdate + unbound): Ronald Klop (Thu, 07 Jul 2022 09:30:20 UTC)
Re: RPI4 + ntpdate + unbound: Ronald Klop (Thu, 07 Jul 2022 10:56:05 UTC)

Re: RPI4 + ntpdate + unbound: John Kennedy (Fri, 08 Jul 2022 14:24:35 UTC)

Re: RPI4 + ntpdate + unbound: Daniel O'Connor (Fri, 08 Jul 2022 05:45:42 UTC)

RPi3 usb boot hang on stable/13: bob prohaska (Sat, 02 Jul 2022 16:58:00 UTC)

Re: RPi3 usb boot hang on stable/13: Mark Millard (Sat, 02 Jul 2022 17:34:11 UTC)

Re: RPi3 usb boot hang on stable/13: Mark Millard (Sat, 02 Jul 2022 19:00:02 UTC)
Re: RPi3 usb boot hang on stable/13: John Kennedy (Sat, 02 Jul 2022 19:12:12 UTC)

Re: RPi3 usb boot hang on stable/13: Mark Millard (Sun, 03 Jul 2022 01:38:24 UTC)

Re: RPi3 usb boot hang on stable/13: Mark Millard (Sun, 03 Jul 2022 02:42:43 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 03 Jul 2022 21:00:12 UTC)
13.1R problems on Pi3: bob prohaska (Mon, 04 Jul 2022 00:36:39 UTC)

Re: 13.1R problems on Pi3: Mark Millard (Mon, 04 Jul 2022 02:22:56 UTC)

Re: 13.1R problems on Pi3: Karl Denninger (Mon, 04 Jul 2022 02:36:35 UTC)

Re: 13.1R problems on Pi3: bob prohaska (Mon, 04 Jul 2022 15:28:34 UTC)

Re: 13.1R problems on Pi3: Karl Denninger (Mon, 04 Jul 2022 16:17:15 UTC)

Re: 13.1R problems on Pi3: bob prohaska (Mon, 04 Jul 2022 18:25:26 UTC)

Re: 13.1R problems on Pi3: Mark Millard (Mon, 04 Jul 2022 18:47:23 UTC)

Re: 13.1R problems on Pi3: Mark Millard (Mon, 04 Jul 2022 20:29:59 UTC)

Re: 13.1R problems on Pi3: bob prohaska (Wed, 06 Jul 2022 00:27:54 UTC)
Re: 13.1R problems on Pi3: Mark Millard (Wed, 06 Jul 2022 01:00:55 UTC)

duplicate MAC - Re: 13.1R problems on Pi3: Ronald Klop (Tue, 05 Jul 2022 09:55:56 UTC)

Re: duplicate MAC - Re: 13.1R problems on Pi3: Mark Millard (Tue, 05 Jul 2022 14:02:18 UTC)
Re: duplicate MAC - Re: 13.1R problems on Pi3: bob prohaska (Tue, 05 Jul 2022 23:34:40 UTC)
Re: duplicate MAC - Re: 13.1R problems on Pi3: Karl Denninger (Tue, 05 Jul 2022 23:37:42 UTC)
Re: duplicate MAC - Re: 13.1R problems on Pi3: Mark Millard (Wed, 06 Jul 2022 00:14:26 UTC)
Re: duplicate MAC - Re: 13.1R problems on Pi3: Mark Millard (Wed, 06 Jul 2022 00:04:08 UTC)

Re: 13.1R problems on Pi3: Karl Denninger (Mon, 04 Jul 2022 19:30:25 UTC)

Re: 13.1R problems on Pi3: Mark Millard (Mon, 04 Jul 2022 17:08:20 UTC)

Re: uart1: Nick Kostyria (Mon, 04 Jul 2022 16:32:12 UTC)
Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Dr. Rolf Jansen (Mon, 04 Jul 2022 23:57:08 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Mark Millard (Tue, 05 Jul 2022 00:57:36 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Mark Millard (Tue, 05 Jul 2022 01:39:39 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: John Kennedy (Tue, 05 Jul 2022 03:14:15 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Mark Millard (Tue, 05 Jul 2022 06:41:37 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: John Kennedy (Tue, 05 Jul 2022 12:47:12 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Mark Millard (Tue, 05 Jul 2022 14:14:00 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: John Kennedy (Tue, 05 Jul 2022 01:33:48 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Dr. Rolf Jansen (Tue, 05 Jul 2022 02:12:38 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: John Kennedy (Tue, 05 Jul 2022 13:51:50 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Dr. Rolf Jansen (Tue, 05 Jul 2022 15:09:57 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: John Kennedy (Tue, 05 Jul 2022 17:51:33 UTC)
Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Mark Millard (Wed, 06 Jul 2022 05:01:07 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Mark Millard (Wed, 06 Jul 2022 15:29:23 UTC)
Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Dr. Rolf Jansen (Fri, 08 Jul 2022 21:34:54 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Mark Millard (Fri, 08 Jul 2022 22:33:02 UTC)
RE: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Wall, Stephen (Sat, 09 Jul 2022 16:47:23 UTC)

Re: Failed to execute custom kernels which where build on a RPi 4 operated by 13.1-RELEASE: Mark Millard (Tue, 05 Jul 2022 21:32:03 UTC)

13.1-RELEASE image fails to boot Rev 1.4 8 GiByte RPi4B (B0T vintage SOC) when dd'd to the example USB3 media then used to try to boot via USB3 port: Mark Millard (Tue, 05 Jul 2022 21:17:17 UTC)

Re: 13.1-RELEASE image fails to boot Rev 1.4 8 GiByte RPi4B (B0T vintage SOC) when dd'd to the example USB3 media then used to try to boot via USB3 port: Mark Millard (Tue, 05 Jul 2022 22:45:25 UTC)

Re: 13.1-RELEASE image fails to boot Rev 1.4 8 GiByte RPi4B (B0T vintage SOC) when dd'd to the example USB3 media then used to try to boot via USB3 port: Mark Millard (Sun, 10 Jul 2022 01:59:47 UTC)

Re: 13.1-RELEASE image fails to boot Rev 1.4 8 GiByte RPi4B (B0T vintage SOC) when dd'd to the example USB3 media then used to try to boot via USB3 port: Mark Millard (Sun, 10 Jul 2022 04:23:42 UTC)

Re: 13.1-RELEASE image fails to boot Rev 1.4 8 GiByte RPi4B (B0T vintage SOC) when dd'd to the example USB3 media then used to try to boot via USB3 port: Mark Millard (Sat, 16 Jul 2022 06:32:07 UTC)

I replicated "UFS2 superblock failed: fs->fs_csaddr (805328) != cgdmin(fs, 0) (5048)" style failure via main 9aa02d5120a (June 30, via snapshot): Mark Millard (Tue, 05 Jul 2022 22:59:52 UTC)

Re: I replicated "UFS2 superblock failed: fs->fs_csaddr (805328) != cgdmin(fs, 0) (5048)" style failure via main 9aa02d5120a (June 30, via snapshot): Mark Millard (Wed, 06 Jul 2022 01:19:16 UTC)

Re: I replicated "UFS2 superblock failed: fs->fs_csaddr (805328) != cgdmin(fs, 0) (5048)" style failure via main 9aa02d5120a (June 30, via snapshot): Mark Millard (Wed, 06 Jul 2022 01:24:12 UTC)

3 more commits in main of changes to UFS/FFS superblock checks, possibly no longer rejecting your case: Mark Millard (Wed, 06 Jul 2022 22:49:34 UTC)
Re: U-Boot fails to load from SD when a USB dual HDD device is attached: Bradley Proffit (Thu, 07 Jul 2022 10:40:14 UTC)
Re: I replicated "UFS2 superblock failed: fs->fs_csaddr (805328) != cgdmin(fs, 0) (5048)" style failure via main 9aa02d5120a (June 30, via snapshot): bob prohaska (Fri, 08 Jul 2022 15:20:16 UTC)
Installing 13.1 ARM on SSD: Wall, Stephen (Fri, 08 Jul 2022 17:40:23 UTC)

Re: Installing 13.1 ARM on SSD: John Kennedy (Fri, 08 Jul 2022 18:00:27 UTC)

Re: Installing 13.1 ARM on SSD: John Kennedy (Fri, 08 Jul 2022 18:05:29 UTC)
RE: Installing 13.1 ARM on SSD: Wall, Stephen (Fri, 08 Jul 2022 18:26:59 UTC)

Re: Installing 13.1 ARM on SSD: John Kennedy (Fri, 08 Jul 2022 19:15:52 UTC)

Re: Installing 13.1 ARM on SSD: Mark Millard (Fri, 08 Jul 2022 20:10:30 UTC)

Re: Installing 13.1 ARM on SSD: Mark Millard (Fri, 08 Jul 2022 20:30:55 UTC)

Re: Installing 13.1 ARM on SSD: Mark Millard (Fri, 08 Jul 2022 20:48:57 UTC)

Re: Installing 13.1 ARM on SSD: John Kennedy (Fri, 08 Jul 2022 19:23:10 UTC)

RE: Installing 13.1 ARM on SSD: Wall, Stephen (Fri, 08 Jul 2022 19:35:11 UTC)

Re: Installing 13.1 ARM on SSD: Mark Millard (Fri, 08 Jul 2022 19:24:04 UTC)
Re: Installing 13.1 ARM on SSD: Robert Clausecker (Fri, 08 Jul 2022 20:01:52 UTC)

RE: New FreeBSD snapshots available: stable/13 (20220708 77712e81bf9): Mark Millard (Fri, 08 Jul 2022 23:02:08 UTC)

Re: New FreeBSD snapshots available: stable/13 (20220708 77712e81bf9): Glen Barber (Fri, 08 Jul 2022 23:17:26 UTC)

Which aarch64 release image is appropriate for the Pinebook Pro (rk3399)?: Paul W. Rankin (Sun, 10 Jul 2022 05:27:50 UTC)

Re: Which aarch64 release image is appropriate for the Pinebook Pro (rk3399)?: Jesper Schmitz Mouridsen (Sun, 10 Jul 2022 20:22:06 UTC)

Re: Which aarch64 release image is appropriate for the Pinebook Pro (rk3399)?: Paul W. Rankin (Wed, 13 Jul 2022 06:14:53 UTC)

Re: Which aarch64 release image is appropriate for the Pinebook Pro (rk3399)?: Jesper Schmitz Mouridsen (Wed, 13 Jul 2022 06:33:26 UTC)

Partition layout of ARM SD card images: Dr. Rolf Jansen (Sun, 10 Jul 2022 19:26:02 UTC)

Re: Partition layout of ARM SD card images: John Kennedy (Sun, 10 Jul 2022 20:05:54 UTC)

Re: Partition layout of ARM SD card images: Karl Denninger (Sun, 10 Jul 2022 21:09:58 UTC)

Re: Partition layout of ARM SD card images: Dr. Rolf Jansen (Sun, 10 Jul 2022 21:20:05 UTC)

Re: Partition layout of ARM SD card images: Mark Millard (Sun, 10 Jul 2022 20:48:59 UTC)

Re: Partition layout of ARM SD card images: Dr. Rolf Jansen (Sun, 10 Jul 2022 21:02:24 UTC)

Re: Partition layout of ARM SD card images: Mark Millard (Sun, 10 Jul 2022 21:44:44 UTC)

Re: Partition layout of ARM SD card images: Dr. Rolf Jansen (Sun, 10 Jul 2022 22:25:25 UTC)

Re: Partition layout of ARM SD card images: Mark Millard (Sun, 10 Jul 2022 23:27:34 UTC)

Re: Partition layout of ARM SD card images: Dr. Rolf Jansen (Sun, 10 Jul 2022 21:34:45 UTC)

Re: Partition layout of ARM SD card images: Mark Millard (Sun, 10 Jul 2022 21:55:28 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 10 Jul 2022 21:00:42 UTC)
i2c bus via USB adapter: John Kennedy (Mon, 11 Jul 2022 02:18:13 UTC)

Re: i2c bus via USB adapter: Dr. Rolf Jansen (Mon, 11 Jul 2022 03:18:59 UTC)

Re: path for overlays: Nick Kostyria (Tue, 12 Jul 2022 03:27:25 UTC)

Re: i2c bus via USB adapter: Daniel O'Connor (Mon, 11 Jul 2022 06:26:34 UTC)

Re: i2c bus via USB adapter: John Kennedy (Mon, 11 Jul 2022 14:08:02 UTC)

Re: Partition layout of ARM SD card images: Rodney W. Grimes (Mon, 11 Jul 2022 14:31:33 UTC)

Re: Partition layout of ARM SD card images: Warner Losh (Mon, 11 Jul 2022 14:38:33 UTC)

Re: Partition layout of ARM SD card images: Mark Millard (Mon, 11 Jul 2022 16:50:11 UTC)

Re: Partition layout of ARM SD card images: Mark Millard (Mon, 11 Jul 2022 20:03:42 UTC)

Re: path for overlays: Mark Millard (Tue, 12 Jul 2022 05:16:44 UTC)

Re: path for overlays: Nick Kostyria (Wed, 13 Jul 2022 03:54:45 UTC)

Re: Partition layout of ARM SD card images: Ronald Klop (Tue, 12 Jul 2022 08:05:21 UTC)

Re: Partition layout of ARM SD card images: Mark Millard (Tue, 12 Jul 2022 16:46:35 UTC)

Startup-/Shutdown Button for the Raspberry Pi 4: Dr. Rolf Jansen (Wed, 13 Jul 2022 01:17:00 UTC)

Re: Startup-/Shutdown Button for the Raspberry Pi 4: Jedi Tek'Unum (Wed, 13 Jul 2022 23:19:57 UTC)

Re: Startup-/Shutdown Button for the Raspberry Pi 4: Dr. Rolf Jansen (Thu, 14 Jul 2022 00:36:03 UTC)

Re: Startup-/Shutdown Button for the Raspberry Pi 4: Jedi Tek'Unum (Thu, 14 Jul 2022 13:26:38 UTC)

Re: Startup-/Shutdown Button for the Raspberry Pi 4: Dr. Rolf Jansen (Thu, 14 Jul 2022 14:45:24 UTC)

[Bug 256468] reaching a breakpoint on an armv7 binary on arm64 causes a SIGBUS: bugzilla-noreply_at_freebsd.org (Wed, 13 Jul 2022 16:55:54 UTC)
Workaround for a FreeBSD-13.1-STABLE-arm64-aarch64-RPI-20220715-831c6b8edda-251792.img (and more) USB3 boot failure on 8 GiByte RPi4B Rev 1.4, B0T SOC: Mark Millard (Sat, 16 Jul 2022 06:14:17 UTC)

Re: Workaround for a FreeBSD-13.1-STABLE-arm64-aarch64-RPI-20220715-831c6b8edda-251792.img (and more) USB3 boot failure on 8 GiByte RPi4B Rev 1.4, B0T SOC [inaccurate timeouts]: Mark Millard (Sat, 16 Jul 2022 18:19:06 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Mark Millard (Sun, 17 Jul 2022 06:45:41 UTC)
Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Rodney W. Grimes (Sun, 17 Jul 2022 17:08:01 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Mark Millard (Sun, 17 Jul 2022 18:46:08 UTC)
Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Ed Maste (Tue, 19 Jul 2022 20:35:36 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Glen Barber (Tue, 19 Jul 2022 20:42:45 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Warner Losh (Tue, 19 Jul 2022 22:45:13 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Mark Millard (Wed, 20 Jul 2022 17:08:20 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Ed Maste (Thu, 21 Jul 2022 14:50:05 UTC)
Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Kyle Evans (Thu, 21 Jul 2022 14:55:40 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Warner Losh (Thu, 21 Jul 2022 15:24:57 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Glen Barber (Fri, 22 Jul 2022 12:45:30 UTC)
Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Glen Barber (Fri, 29 Jul 2022 20:49:43 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Mark Millard (Sat, 30 Jul 2022 02:56:18 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Mark Millard (Sat, 30 Jul 2022 03:11:23 UTC)

Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Mark Millard (Sat, 30 Jul 2022 03:42:44 UTC)
Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Mark Millard (Sat, 30 Jul 2022 05:09:43 UTC)
Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Mark Millard (Sat, 30 Jul 2022 06:03:31 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 17 Jul 2022 21:00:52 UTC)
Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Rodney W. Grimes (Wed, 20 Jul 2022 16:34:19 UTC)
Re: SPI and si4463 radio: Nick Kostyria (Thu, 21 Jul 2022 03:46:20 UTC)
Re: git: 1dfcff294e44 - main - release: increase IMAGE_SIZE for arm, arm64, riscv [odd alignment for SBC images]: Rodney W. Grimes (Thu, 21 Jul 2022 16:43:14 UTC)
[Bug 265422] redefinition of enumerator '_UVRSC_CORE' on armv7: bugzilla-noreply_at_freebsd.org (Sun, 24 Jul 2022 18:09:10 UTC)

[Bug 265422] redefinition of enumerator '_UVRSC_CORE' on armv7: bugzilla-noreply_at_freebsd.org (Sun, 24 Jul 2022 18:34:27 UTC)

Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 24 Jul 2022 21:01:15 UTC)
ld: error: undefined symbol: xdr_domainname in stable/13: bob prohaska (Tue, 26 Jul 2022 20:14:50 UTC)

Re: ld: error: undefined symbol: xdr_domainname in stable/13: Mark Millard (Wed, 27 Jul 2022 01:40:25 UTC)

Re: ld: error: undefined symbol: xdr_domainname in stable/13: bob prohaska (Wed, 27 Jul 2022 16:02:01 UTC)

Re: UFS checksum error during arm64 VM installation: Ed Maste (Fri, 29 Jul 2022 15:04:07 UTC)
ARM64 system error: John F Carr (Sun, 31 Jul 2022 16:55:37 UTC)
Problem reports for freebsd-arm@FreeBSD.org that need special attention: bugzilla-noreply_at_FreeBSD.org (Sun, 31 Jul 2022 21:00:53 UTC)

Go to: [ monthly archives ] [ by author ] [ by date ]