Re: Raspberry Pi 3B Distorted U-boot Display
- Reply: Archimedes Gaviola : "Re: Raspberry Pi 3B Distorted U-boot Display"
- In reply to: Archimedes Gaviola : "Raspberry Pi 3B Distorted U-boot Display"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 28 Feb 2022 08:51:47 UTC
On Sat, Feb 26, 2022 at 11:49 AM Archimedes Gaviola < archimedes.gaviola@gmail.com> wrote: > Hi, > > I've installed FreeBSD 13.0-RELEASE and 14.0-CURRENT successfully with > Raspberry Pi 3B. However, upon U-boot initialization stage the monitor > display is distorted as you can see here > https://pasteboard.co/hxDjJHwxXPc8.jpg but when the FreeBSD kernel is > loaded it displays normal as you can see here > https://pasteboard.co/EkgcZdQSxjtA.jpg. I am thinking of lowering the > resolution so I tried changing the HDMI configuration settings in the > config.txt but it cannot be changed, it has no effect. It always stays on > the default 1366x768 as what dmesg has detected. This behavior is also > observed in 14.0-CURRENT. > > FreeBSD 13.0-RELEASE #0: Sat Feb 19 14:09:03 PST 2022 > root@fbsd13:/usr/src/sys/arm64/compile/GENERIC arm64 > FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git > llvmorg-11.0.1-0-g43ff75f2c3fe) > VT(efifb): resolution 1366x768 > ... > fb0: <BCM2835 VT framebuffer driver> on simplebus0 > fb0: keeping existing fb bpp of 32 > fbd0 on fb0 > WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD > 14.0. > VT: Replacing driver "efifb" with new "fb". > fb0: 1366x768(1366x768@0,0) 32bpp > fb0: fbswap: 1, pitch 5504, base 0x3e7f2000, screen_size 4227072 > > freebsd@fbsd13:~ % cat /boot/msdos/config.txt > [all] > arm_64bit=1 > dtparam=audio=on,i2c_arm=on,spi=on > dtoverlay=ds3231 > dtoverlay=mmc > dtoverlay=disable-bt > device_tree_address=0x4000 > kernel=u-boot.bin > enable_uart=1 > > [pi4] > hdmi_group=2 > hdmi_mode=11 > armstub=armstub8-gic.bin > > freebsd@fbsd13:~ % grep -r "1366x768" /boot/msdos/ > Binary file /boot/msdos/start_cd.elf matches > Binary file /boot/msdos/start_db.elf matches > Binary file /boot/msdos/start_x.elf matches > Binary file /boot/msdos/start.elf matches > Binary file /boot/msdos/start4.elf matches > Binary file /boot/msdos/start4cd.elf matches > Binary file /boot/msdos/start4db.elf matches > Binary file /boot/msdos/start4x.elf matches > > Using the same images with 13.0-RELEASE and 14.0-CURRENT this issue does > not occur in RPi 4B. Anyone encountered this issue? I confirmed this as > well with another new RPi 3B hardware and it behaves the same. Please see > attached dmesg log output for reference. > > Okay, I got this working now with the following HDMI config.txt adjustment. I just indicated the :0 which means the first HDMI interface in group and mode settings. So, the configuration from hdmi_group=2 hdmi_mode=11 becomes hdmi_group:0=2 hdmi_mode:0=11 Tested using 14.0-CURRENT. freebsd@generic:~ % uname -a FreeBSD generic 14.0-CURRENT FreeBSD 14.0-CURRENT #0 main-n253384-45c23c2608e: Thu Feb 24 09:18:58 UTC 2022 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 Reference: https://www.raspberrypi.com/documentation/computers/config_txt.html Thanks, Archimedes