Re: HoneyComb first-boot notes
Date: Tue, 22 Jun 2021 08:31:51 UTC
> >> I put an existing FreeBSD Optane into a just delivered > >> HoneyComb, put in the RAM and the matching UEFI/ACPI > >> image on a microsd card and put the card in the slot. > >> I plugged in a USB3 Ethernet dongle, like I use on some > >> other systems. Serial console via its USB port for such. > >> (Optane instead of video card.) The UEFI/ACPI image was > >> extracted from: > >> > >> https://solid-run-images.sos-de-fra-1.exo.io/LX2k/lx2160a_uefi/lx2160acex7_2000_700_2900_8_5_2_sd_81b4bbe.img.xz > >> > >> in order to match the RAM and being based on the > >> most current vintage at: > >> > >> https://github.com/SolidRun/lx2160a_uefi/ > >> > >> It booted. > > > > Could you share whole dmesg? > > I've not done a "boot -v" . The below is actually from a > captured serial console output. It is lightly edited. I > have omitted nearly all loader output (and before). > Thanks for sharing. Have you seen somewhere in output from UEFI (before the loader) that "DPAA2 Management Complex initialized"? Regards, Dmitry