Re: git: 1dec3639fd0c - main - sysutils/u-boot: Update to 2021.07
Date: Sun, 11 Jul 2021 18:47:13 UTC
On Sun, 11 Jul 2021 20:28:36 +0200, "Herbert J. Skuhra" wrote: > > On Fri, 09 Jul 2021 15:35:17 +0200, "Herbert J. Skuhra" wrote: > > > > With u-boot 2021.07 two of my RPis no longer boot: > > > > Raspberry Pi 3 Model B V1.2: mmc not detected; tries to boot over the network. > > With u-boot 2021.04 I get: > > > mmc list > mmc@7e300000: 0 (SD) > > > mmc part > > Partition Map for MMC device 0 -- Partition Type: DOS > > Part Start Sector Num Sectors UUID Type > 1 2048 102400 5fd0f4e4-01 0c Boot > 2 104448 124631040 5fd0f4e4-02 a5 > > > mmcinfo > Device: mmc@7e300000 > Manufacturer ID: 3 > OEM: 5344 > Name: SC64G > Bus Speed: 25000000 > Mode: MMC legacy > Rd Block Len: 512 > SD version 3.0 > High Capacity: Yes > Capacity: 59.5 GiB > Bus Width: 4-bit > Erase Group Size: 512 Bytes > > But with u-boot 2021.07 (starting with rc1) I get: > > > mmc list > mmc@7e300000: 2 (SD) > > > mmc part > MMC Device 0 not found > no mmc device at slot 0 > > > mmc info > MMC Device 0 not found > no mmc device at slot 0 > > I have to run > > > mmc dev 2 > > Afterwards 'mmc part' and 'mmc info' show the above output. > But how do I boot from mmc dev 2? And how can I change this > permanently? My RPi3 boots if I run: U-Boot> setenv boot_targets 'mmc2' U-Boot> setenv bootcmd_mmc2 'devnum=2; run mmc_boot' U-Boot> boot -- Herbert