git: 8f1a2d507e25 - main - iwm.4: move hardware list to .Sh HARDWARE and minor cleanup
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sun, 10 Nov 2024 19:34:06 UTC
The branch main has been updated by bz: URL: https://cgit.FreeBSD.org/src/commit/?id=8f1a2d507e25e77d20a5d7675dc8eee9b83d3570 commit 8f1a2d507e25e77d20a5d7675dc8eee9b83d3570 Author: Alexander Ziaee <concussious@runbox.com> AuthorDate: 2024-11-10 19:28:22 +0000 Commit: Bjoern A. Zeeb <bz@FreeBSD.org> CommitDate: 2024-11-10 19:33:18 +0000 iwm.4: move hardware list to .Sh HARDWARE and minor cleanup Add devices supported by this driver to a HARDWARE section for inclusion in the Release Hardware Compatibility Notes. While here: - license: add spdx license identifier tag - synopsis: join a line for grep/brevity - description: reflow for consistency, xref iwmfw(4) - examples: use test-net-1 in cidr notation as example IPv4 address - see also: add networking(7) quick start guide - bugs: move 'incompatible modes' here for consistency/flow - mention 802.11a support MFC after: 3 days Reported by: bz (relnotes generation, cidr, test-net-1 ip4addr) Reported by: Graham Percival <gperciva@tarsnap.com> (no prompt) Reviewed by: bz Differential Revision: https://reviews.freebsd.org/D47171 --- share/man/man4/iwm.4 | 94 ++++++++++++++++++++++++++++++---------------------- 1 file changed, 54 insertions(+), 40 deletions(-) diff --git a/share/man/man4/iwm.4 b/share/man/man4/iwm.4 index b810f7016e54..7fd301929524 100644 --- a/share/man/man4/iwm.4 +++ b/share/man/man4/iwm.4 @@ -1,3 +1,6 @@ +.\"- +.\" SPDX-License-Identifier: BSD-2-Clause +.\" .\" Copyright (c) 2004-2006 .\" Damien Bergamini <damien.bergamini@free.fr>. All rights reserved. .\" @@ -31,8 +34,7 @@ .Nd Intel IEEE 802.11ac wireless network driver .Sh SYNOPSIS To compile this driver into the kernel, -include the following lines in your -kernel configuration file: +include the following lines in your kernel configuration file: .Bd -ragged -offset indent .Cd "device iwm" .Cd "device pci" @@ -79,55 +81,59 @@ iwm9260fw_load="YES" .Sh DESCRIPTION The .Nm -driver provides support for: -.Pp -.Bl -tag -width Ds -offset indent -compact -.It Intel Dual Band Wireless AC 3160 -.It Intel Dual Band Wireless AC 3165 -.It Intel Dual Band Wireless AC 3168 -.It Intel Dual Band Wireless AC 7260 -.It Intel Dual Band Wireless AC 7265 -.It Intel Dual Band Wireless AC 8260 -.It Intel Dual Band Wireless AC 8265 -.It Intel Dual Band Wireless AC 9260 -.It Intel Dual Band Wireless AC 9270 -.It Intel Dual Band Wireless AC 946X -.It Intel Dual Band Wireless AC 9560 -.El -.Pp -.Nm -supports +driver supports running most Intel Wireless AC series network devices in .Cm station mode operation. Only one virtual interface may be configured at any time. -For more information on configuring this device, see -.Xr ifconfig 8 . -.Pp This driver requires the firmware built with the -.Nm iwmfw +.Xr iwmfw 4 module to work. .Pp -Currently, +For more information on configuring this device, see +.Xr ifconfig 8 . +.Sh HARDWARE +The .Nm -only supports 802.11b and 802.11g modes. -It will not associate to access points that are configured to operate only -in 802.11n or 802.11ac modes. +driver supports the following PCIe Wi-Fi devices: +.Pp +.Bl -bullet -compact +.It +Intel Dual Band Wireless AC 3160 +.It +Intel Dual Band Wireless AC 3165 +.It +Intel Dual Band Wireless AC 3168 +.It +Intel Dual Band Wireless AC 7260 +.It +Intel Dual Band Wireless AC 7265 +.It +Intel Dual Band Wireless AC 8260 +.It +Intel Dual Band Wireless AC 8265 +.It +Intel Dual Band Wireless AC 9260 +.It +Intel Dual Band Wireless AC 9270 +.It +Intel Dual Band Wireless AC 946X +.It +Intel Dual Band Wireless AC 9560 +.El .Sh EXAMPLES Join an existing BSS network (i.e., connect to an access point): -.Bd -literal -offset indent -ifconfig wlan create wlandev iwm0 inet 192.168.0.20 \e - netmask 0xffffff00 -.Ed +.Pp +.Dl ifconfig wlan create wlandev iwm0 inet 192.0.2.20/24 .Pp Join a specific BSS network with network name -.Dq Li my_net : +.Ar my_net : .Pp -.Dl "ifconfig wlan create wlandev iwm0 ssid my_net up" +.Dl ifconfig wlan create wlandev iwm0 ssid my_net up .Pp Join a specific BSS network with 64-bit WEP encryption: .Bd -literal -offset indent ifconfig wlan create wlandev iwm0 ssid my_net \e - wepmode on wepkey 0x1234567890 weptxkey 1 up + wepmode on wepkey 0x1234567890 weptxkey 1 up .Ed .Pp Join a specific BSS network with 128-bit WEP encryption: @@ -155,15 +161,16 @@ Verify the .Xr iwmfw 4 firmware module is present. .It "iwm%d: could not load boot firmware" -An attempt to upload the boot firmware image to the onboard microcontroller -failed. +An attempt to upload the boot firmware image +to the onboard microcontroller failed. This should not happen. .It "iwm%d: could not load microcode" -An attempt to upload the microcode image to the onboard microcontroller failed. +An attempt to upload the microcode image +to the onboard microcontroller failed. This should not happen. .It "iwm%d: could not load main firmware" -An attempt to upload the main firmware image to the onboard microcontroller -failed. +An attempt to upload the main firmware image +to the onboard microcontroller failed. This should not happen. .El .Sh SEE ALSO @@ -174,5 +181,12 @@ This should not happen. .Xr wlan_ccmp 4 , .Xr wlan_tkip 4 , .Xr wlan_wep 4 , +.Xr networking 7 , .Xr ifconfig 8 , .Xr wpa_supplicant 8 +.Sh BUGS +Currently, +.Nm +only supports 802.11a/b/g modes. +It will not associate to access points that are configured to operate +only in 802.11n/ac modes.