git: 320e4beb9761 - main - gpiopower: trigger low, high and both edges
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sun, 28 Jan 2024 11:31:19 UTC
The branch main has been updated by avg: URL: https://cgit.FreeBSD.org/src/commit/?id=320e4beb97618c6964380bfa404a3e96c5de7663 commit 320e4beb97618c6964380bfa404a3e96c5de7663 Author: Andriy Gapon <avg@FreeBSD.org> AuthorDate: 2024-01-28 11:29:41 +0000 Commit: Andriy Gapon <avg@FreeBSD.org> CommitDate: 2024-01-28 11:29:41 +0000 gpiopower: trigger low, high and both edges Power off or reset may be activated either by low or high signal or by an edge. So, try everything. Also, the driver now supports DTS properties for timings. Finally, the driver does not change the pin configuration during attach. It is assumed that the pin is already in a state that does not trigger the power event (otherwise we wouldn't be running). --- sys/dev/gpio/gpiopower.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) diff --git a/sys/dev/gpio/gpiopower.c b/sys/dev/gpio/gpiopower.c index 5c369396813f..2f09f79850d5 100644 --- a/sys/dev/gpio/gpiopower.c +++ b/sys/dev/gpio/gpiopower.c @@ -34,6 +34,7 @@ #include <sys/module.h> #include <sys/reboot.h> +#include <dev/fdt/fdt_common.h> #include <dev/ofw/ofw_bus.h> #include <dev/gpio/gpiobusvar.h> @@ -41,6 +42,9 @@ struct gpiopower_softc { gpio_pin_t sc_pin; int sc_rbmask; + int sc_hi_period; + int sc_lo_period; + int sc_timeout; }; static void gpiopower_assert(device_t dev, int howto); @@ -65,6 +69,7 @@ gpiopower_attach(device_t dev) { struct gpiopower_softc *sc; phandle_t node; + uint32_t prop; sc = device_get_softc(dev); @@ -80,9 +85,20 @@ gpiopower_attach(device_t dev) sc->sc_rbmask = RB_HALT | RB_POWEROFF; else sc->sc_rbmask = 0; + + sc->sc_hi_period = 100000; + sc->sc_lo_period = 100000; + sc->sc_timeout = 1000000; + + if ((OF_getprop(node, "active-delay-ms", &prop, sizeof(prop))) > 0) + sc->sc_hi_period = fdt32_to_cpu(prop) * 1000; + if ((OF_getprop(node, "inactive-delay-ms", &prop, sizeof(prop))) > 0) + sc->sc_lo_period = fdt32_to_cpu(prop) * 1000; + if ((OF_getprop(node, "timeout-ms", &prop, sizeof(prop))) > 0) + sc->sc_timeout = fdt32_to_cpu(prop) * 1000; + EVENTHANDLER_REGISTER(shutdown_final, gpiopower_assert, dev, SHUTDOWN_PRI_LAST); - gpio_pin_setflags(sc->sc_pin, GPIO_PIN_OUTPUT); return (0); } @@ -107,10 +123,16 @@ gpiopower_assert(device_t dev, int howto) else return; + gpio_pin_setflags(sc->sc_pin, GPIO_PIN_OUTPUT); + gpio_pin_set_active(sc->sc_pin, true); + DELAY(sc->sc_hi_period); + gpio_pin_set_active(sc->sc_pin, false); + DELAY(sc->sc_lo_period); gpio_pin_set_active(sc->sc_pin, true); + DELAY(sc->sc_timeout); - /* Wait a second for it to trip */ - DELAY(10000000); + device_printf(dev, "%s failed\n", + (howto & RB_POWEROFF) != 0 ? "power off" : "reset"); } static device_method_t gpiopower_methods[] = {