Re: git: 1bd4f769caf8 - main - add dtb support for RPI CM4, CM4s, CM4_ioBoard

> Am 25.04.2024 um 22:01 schrieb Kyle Evans <kevans@FreeBSD.org>:
> 
> On 4/25/24 14:43, Colin Percival wrote:
>> On 4/25/24 12:24, Warner Losh wrote:
>>> On Thu, Apr 25, 2024, 12:57 PM Colin Percival <cperciva@tarsnap.com <mailto:cperciva@tarsnap.com>> wrote:
>>>     On 4/19/24 16:11, Warner Losh wrote:
>>>      >      add dtb support for RPI CM4, CM4s, CM4_ioBoard
>>>      >
>>>      >      Signed-off-by: Klaus Küchemann <maciphone2@googlemail.com
>>>     <mailto:maciphone2@googlemail.com>>
>>>      >      Reviewed by: imp
>>>      >      Pull Request: https://github.com/freebsd/freebsd-src/pull/1182
>>>     <https://github.com/freebsd/freebsd-src/pull/1182>
>>>      > ---
>>>      > --- a/release/arm64/RPI.conf
>>>      > +++ b/release/arm64/RPI.conf
>>>      > -DTB="bcm2710-rpi-2-b.dtb bcm2710-rpi-3-b.dtb bcm2710-rpi-3-b-plus.dtb
>>>     bcm2710-rpi-cm3.dtb bcm2711-rpi-4-b.dtb"
>>>      > +DTB="bcm2710-rpi-2-b.dtb bcm2710-rpi-3-b.dtb bcm2710-rpi-3-b-plus.dtb
>>>     bcm2710-rpi-cm3.dtb \
>>>      > +     bcm2711-rpi-4-b.dtb bcm2711-rpi-cm4-io.dtb bcm2711-rpi-cm4.dtb
>>>     bcm2711-rpi-cm4s.dtb"
>>> 
>>>     This broke the RPI release build, since bcm2711-rpi-cm4s.dtb doesn't exist.
>>>     Is it provided by a port which we should add to the RPI build?
>>> 
>>> I thought it was in tree. I'll look into this and report back.
>> Entirely possible.  The release-building code is trying to copy it from
>> /usr/local/share/rpi-firmware/bcm2711-rpi-cm4s.dtb
>> so if it's somewhere else we need to adjust that code.
> 
> The rpi-firmware port is supposed to provide all .dtb used here, but we've never installed that one.  It really shouldn't have been included in the list to begin with, but I guess if there's demand we should fix the port to include it.
> 
> Thanks,
> 
> Kyle Evans

we only have tested/fixed the CM4-model,  not forceably need the cm4s.dtb , so no objections to remove cm4s.dtb from the dtb-list at least temporarily.  
But please hold cm4.dtb and the cm4_io_.dtb, which will then hopefully not break the rpi-release anymore. 
Of course would be better to upgrade the port.
thank you
Regards
Klaus