git: 683c36ae04ab - stable/11 - xhci(4): Ensure the so-called data toggle gets properly reset.

The branch stable/11 has been updated by hselasky:

URL: https://cgit.FreeBSD.org/src/commit/?id=683c36ae04abac55841271b3d9a65c0eb5b7155c

commit 683c36ae04abac55841271b3d9a65c0eb5b7155c
Author:     Hans Petter Selasky <hselasky@FreeBSD.org>
AuthorDate: 2022-04-21 14:59:09 +0000
Commit:     Hans Petter Selasky <hselasky@FreeBSD.org>
CommitDate: 2022-04-27 19:17:46 +0000

    xhci(4): Ensure the so-called data toggle gets properly reset.
    
    Use the drop and enable endpoint context commands to force a reset of
    the data toggle for USB 2.0 and USB 3.0 after:
     - clear endpoint halt command (when the driver wishes).
     - set config command (when the kernel or user-space wants).
     - set alternate setting command (only affected endpoints).
    
    Some XHCI HW implementations may not allow the endpoint reset command when
    the endpoint context is not in the halted state.
    
    Reported by:            Juniper and Gary Jennejohn
    Sponsored by:           NVIDIA Networking
    
    (cherry picked from commit cda31e734925346328fd2369585ab3f6767ec225)
---
 sys/dev/usb/controller/xhci.c | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

diff --git a/sys/dev/usb/controller/xhci.c b/sys/dev/usb/controller/xhci.c
index cfe1b40fdbf8..f71062059653 100644
--- a/sys/dev/usb/controller/xhci.c
+++ b/sys/dev/usb/controller/xhci.c
@@ -3856,6 +3856,7 @@ xhci_configure_reset_endpoint(struct usb_xfer *xfer)
 	uint32_t mask;
 	uint8_t index;
 	uint8_t epno;
+	uint8_t drop;
 
 	pepext = xhci_get_endpoint_ext(xfer->xroot->udev,
 	    xfer->endpoint->edesc);
@@ -3897,15 +3898,19 @@ xhci_configure_reset_endpoint(struct usb_xfer *xfer)
 	 */
 	switch (xhci_get_endpoint_state(udev, epno)) {
 	case XHCI_EPCTX_0_EPSTATE_DISABLED:
-                break;
+		drop = 0;
+		break;
 	case XHCI_EPCTX_0_EPSTATE_STOPPED:
+		drop = 1;
 		break;
 	case XHCI_EPCTX_0_EPSTATE_HALTED:
 		err = xhci_cmd_reset_ep(sc, 0, epno, index);
-		if (err != 0)
+		drop = (err != 0);
+		if (drop)
 			DPRINTF("Could not reset endpoint %u\n", epno);
 		break;
 	default:
+		drop = 1;
 		err = xhci_cmd_stop_ep(sc, 0, epno, index);
 		if (err != 0)
 			DPRINTF("Could not stop endpoint %u\n", epno);
@@ -3926,11 +3931,25 @@ xhci_configure_reset_endpoint(struct usb_xfer *xfer)
 	 */
 
 	mask = (1U << epno);
-	xhci_configure_mask(udev, mask | 1U, 0);
+
+	if (epno != 1 && drop != 0) {
+		/* drop endpoint context to reset data toggle value, if any. */
+	  	xhci_configure_mask(udev, mask, 1);
+		err = xhci_cmd_configure_ep(sc, buf_inp.physaddr, 0, index);
+		if (err != 0) {
+			DPRINTF("Could not drop "
+			    "endpoint %u at slot %u.\n", epno, index);
+		} else {
+			sc->sc_hw.devs[index].ep_configured &= ~mask;
+		}
+	}
+
+	xhci_configure_mask(udev, mask, 0);
 
 	if (!(sc->sc_hw.devs[index].ep_configured & mask)) {
-		sc->sc_hw.devs[index].ep_configured |= mask;
 		err = xhci_cmd_configure_ep(sc, buf_inp.physaddr, 0, index);
+		if (err == 0)
+			sc->sc_hw.devs[index].ep_configured |= mask;
 	} else {
 		err = xhci_cmd_evaluate_ctx(sc, buf_inp.physaddr, index);
 	}