git: b1f84cefd9c8 - main - UPDATING: Trim upto stable/9 release
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Thu, 04 May 2023 18:54:48 UTC
The branch main has been updated by bofh:
URL: https://cgit.FreeBSD.org/ports/commit/?id=b1f84cefd9c83da15053a994e6dbfa582374cf8e
commit b1f84cefd9c83da15053a994e6dbfa582374cf8e
Author: Muhammad Moinur Rahman <bofh@FreeBSD.org>
AuthorDate: 2023-05-04 15:32:47 +0000
Commit: Muhammad Moinur Rahman <bofh@FreeBSD.org>
CommitDate: 2023-05-04 18:54:27 +0000
UPDATING: Trim upto stable/9 release
Approved by: portmgr
---
UPDATING | 3175 --------------------------------------------------------------
1 file changed, 3175 deletions(-)
diff --git a/UPDATING b/UPDATING
index cec23f11a5e9..425cfbebcc6e 100644
--- a/UPDATING
+++ b/UPDATING
@@ -15458,3178 +15458,3 @@ leave you without networking.
If you want to switch to lang/perl5.14 from lang/perl5.{8,10,12} please
follow instructions in the entry 20110517 in this file.
-
-20111205:
- AFFECTS: users of ruby-gnome ports
- AUTHOR: swills@FreeBSD.org
-
- ruby-gnome has been updated to 1.0.3. Some of them have been removed
- since they are no longer included upstream. The meta port is
- now x11/ruby-gnome2. To update run the following command:
-
- # portmaster -o x11/ruby-gnome2 x11/ruby-gnome2-all
-
- You may also wish to remove the old ports using:
-
- # portmaster -s
-
-20111130:
- AFFECTS: users of dns/nsd
- AUTHOR: zi@FreeBSD.org
-
- The database format of nsd.db has changed as of version 3.2.9.
- Before you run nsd, you must convert the existing database:
-
- # nsdc rebuild
-
-20111123:
- AFFECTS: users of net-im/kopete or net-im/libjingle
- AUTHOR: kde@FreeBSD.org
-
- kopete and libjingle are now depending on a newer oRTP from
- linphone-base. To correctly switch to the new port, you need to deinstall
- ortp prior to the update:
-
- # pkg_delete -f ortp-\*
-
-20111123:
- AFFECTS: users of databases/redis
- AUTHOR: osa@FreeBSD.org
-
- The redis configuration file, redis.conf, have been changed, some options
- removed in newer versions (>=2.4). In some cases, redis-server with
- older configuration might does not run at startup.
-
- If you run into startup problems, re-edit configuration file.
-
-20111101:
- AFFECTS: users of x11/kde4-workspace
- AUTHOR: kde@FreeBSD.org
-
- If your KDM fails with the message
- 'X server "/usr/bin/X" cannot be executed'
- you need to delete its configuration file and restart it:
-
- # rm /usr/local/kde4/share/config/kdm/kdmrc
- # service kdm4 restart
-
-20111101:
- AFFECTS: users of graphics/poppler-gtk
- AUTHOR: Koop Mast <kwm@FreeBSD.org>
-
- Poppler was update to 0.18.0, and the gtk slave port was renamed to
- match the library it installs. Please run the following command to migrate.
-
- # portmaster -o graphics/poppler-glib poppler-gtk-0.16.7
-
-20111031:
- AFFECTS: users of textproc/py-creole
- AUTHOR: Stanislav Svirid <count@211.ru>
-
- Some API is changed: replace 'parser_kwargs' and 'emitter_kwargs'
- with separate arguments. More information on new API:
- http://code.google.com/p/python-creole/wiki/API
-
-20111025:
- AFFECTS: users of print/flpsed or www/dillo2
- AUTHOR: bf@FreeBSD.org
-
- The new versions of flpsed and dillo have switched from
- x11-toolkits/fltk2 to the new fltk 1.3.0 from x11-toolkits/fltk.
- Users who have customizations specific to fltk2 may need to consult
- the fltk 1.3 documents in order to adjust their local settings. For
- dillo, some commonly-used key bindings have changed, and new
- configuration options are available: consult dillorc.dist and
- keysrc.dist for details.
-
-20111019:
- AFFECTS: users of mail/thunderbird or www/seamonkey with lightning
- plugin installed.
- AUTHOR: gecko@FreeBSD.org
-
- To get an up to date version of lightning you should use the new
- LIGHTNING option in mail/thunderbird or www/seamonkey. This option
- is not enabled by default so you have to run "make config" prior
- to the build. The old deskutils/lightning-thunderbird and
- deskutils/lightning ports should no longer be used and will be
- removed very soon.
-
- Like other XPIs ports, lightning now registers itself as a global
- extension and doesn't create the XPI to be installed manually.
- Upgrading users should remove lightning from their profile before
- installing Thunderbird or SeaMonkey the first time with the new
- LIGHTNING option enabled.
-
-20111018:
- AFFECTS: users of mail/postfix-current
- AUTHOR: Sahil Tandon <sahil@FreeBSD.org>
-
- The default smtp_address_preference value is now "any" instead
- of "ipv6", meaning choose randomly between IPv6 and IPv4. With
- this the Postfix SMTP client will have more success delivering
- mail to sites that have problematic IPv6 configurations.
-
-20111016:
- AFFECTS: users of devel/p5-subversion-freebsd
- AUTHOR: wxs@FreeBSD.org
-
- devel/p5-subversion-freebsd has been removed as it is no longer necessary.
- If you have it installed please run the following to switch to
- devel/p5-subversion:
-
- portmaster -o devel/p5-subversion p5-subversion-freebsd
-
- Please also see the second entry below (20111016) if haven't upgraded
- subversion yet.
-
-20111016:
- AFFECTS: users of KDE SC 4
- AUTHOR: kde@FreeBSD.org
-
- KDE SC has been updated to 4.7.2. A number of files were moved between
- packages and several ports were split, thus manual intervention into
- update procedure is required:
-
- # pkg_delete -f raptor-1\* kdelibs-4\* kdebase-\*4\* \
- kdeaccessibility-4\* kdeedu-4\* kdegames-4\* kdegraphics-4\* \
- kdesdk-4\* kdeutils-4\* konq-plugins-4\* ktts\* nepomukcontroller\* \
- ruby\*-kdebindings\* kdebindings-smoke\*
- # pkg_delete -f kdehier4\*
- # mv /usr/local/kde4/etc/pam.d/* \
- /usr/local/etc/pam.d/
- # mv /usr/local/kde4/etc/rc.d/* \
- /usr/local/etc/rc.d/
- # mv /usr/local/kde4/share/dbus-1/services/* \
- /usr/local/share/dbus-1/services/
- # mv /usr/local/kde4/share/dbus-1/system-services/* \
- /usr/local/share/dbus-1/system-services/
- # rmdir /usr/local/kde4/etc/pam.d /usr/local/kde4/etc/rc.d \
- /usr/local/kde4/share/dbus-1/*services
- # rm -r /var/tmp/kdecache-*
- # portmaster misc/kdehier4
-
- If you have - or plan to install - net/kdenetwork4, also run:
-
- # portmaster -o net/linphone-base ortp
-
- Finally:
-
- # portmaster -a
-
- Also, remove /usr/local/kde4/etc/rc.d from local_startup in rc.conf(5).
- Failure to do this will cause all enabled scripts in /usr/local/etc/rc.d
- to be started twice.
-
- Remember to check for missing ports, bearing in mind that x11/kdebase4*
- ports were replaced by x11/kde4-* ones, ktts was replaced by jovie, while
- konq-plugins-kde4 and nepomukcontroller were removed. Then:
-
- # portmaster --check-depends
-
- You're also encouraged to run `pkg_cutleaves` or similar to check for
- orphaned ports.
-
- Please, note that `pkg_add -r kde4` will not install Plasma scriptengines
- and printer utilities by default anymore, and `pkg_add -r kdegames4` will
- not install Kajongg. This was made to avoid depending by default on
- kdebindings.
-
-20111016:
- AFFECTS: users of devel/subversion, devel/subversion-freebsd,
- devel/p5-subversion, devel/py-subversion,
- devel/ruby-subversion and java/subversion-java and
- all dependand ports.
- AUTHOR: Lev Serebryakov <lev@FreeBSD.org>
-
- Subversion was updated to version 1.7.0 and port was reworked.
-
- Now there is no "devel/subversion-freebsd" port. All FreeBSD-specific patches
- are incorporated into main subversion port as options, which are turned ON by
- default.
-
- These options are:
-
- P4_STYLE_MARKERS -- change conflict markers to P4 style,
- established for FreeBSD projects.
- This is not mandatory for working with
- FreeBSD sources.
-
- ENHANCED_KEYWORD -- Support for custom keywords, like
- $ FreeBSD $ in sources.
- This is MANDATORY for working with
- FreeBSD sources.
-
- FREEBSD_TEMPLATE -- Standard FreeBSD commit template.
- It is RECOMMENDED for working with
- FreeBSD sources.
-
- Also, subversion 1.7.0 changes the working copy format,
- and a working copy cannot be shared between
- subversion 1.7.0 and 1.6.x. Please, think twice before
- upgrading.
-
- Additional the port "devel/subversion16" was created to
- support subversion 1.6.x. Subversion 1.7.x and 1.6.x
- cannot be installed simultaneously!
-
- Binding ports can be built with Subversion 1.7.0 (Default)
- or with Subversion 1.6.x. To build bindings with subversion 1.6.x
- you should set variable WITH_SUBVERSION_VER to "16".
-
- There are several ways to upgrade, depending on what you used
- before and what you want to get after upgrade.
-
- (a) You use devel/subversion without FreeBSD patches and, maybe,
- some bindings. You want fresh'n'new subversion 1.7.0.
- Please, run:
-
- # cd /usr/ports/devel/subversion && make config
- <deselect first three options described above, if you want it>
- # portupgrade -r devel/subversion
- or
- # portmaster -R -r subversion-1.6
-
- (b) You use devel/subversion-freebsd and, maybe, some
- bindings. You want fresh'n'new subversion 1.7.0, again
- with FreeBSD patches.
- Please, run:
-
- # cd /usr/ports/devel/subversion && make config
- <make sure that first three options are selected>
- # portupgrade -o devel/subversion devel/subversion-freebsd
- # portupgrade -r devel/subversion
- or
- # portmaster -o devel/subversion devel/subversion-freebsd
- # portmaster -R -r subversion-1.7
-
- (c) You use devel/subversion without FreeBSD patches and, maybe,
- some bindings. You want good old subversion 1.6.x, again
- without again.
- Please, run:
-
- # cd /usr/ports/devel/subversion16 && make config
- <deselect first three options described above, if you want it>
- # portupgrade -o devel/subversion16 devel/subversion
- # portupgrade -m "WITH_SUBVERSION_VER=16" -r devel/subversion16
- or
- # portmaster -o devel/subversion16 devel/subversion
- # portmaster -m "WITH_SUBVERSION_VER=16" -R -r subversion-1.6
-
- (d) You use devel/subversion-freebsd and, maybe, some bindings.
- You want good old subversion 1.6.x, with FreeBSD patches.
- Please, run:
-
- # cd /usr/ports/devel/subversion16 && make config
- <make sure, that first three options are selected>
- # portupgrade -o devel/subversion16 devel/subversion-freebsd
- # portupgrade -m "WITH_SUBVERSION_VER=16" -r devel/subversion16
- or
- # portmaster -o devel/subversion16 devel/subversion-freebsd
- # portmaster -m "WITH_SUBVERSION_VER=16" -R -r subversion-1.6
-
-20111005:
- AFFECTS: users of lang/erlang
- AUTHOR: Jimmy Olgeni <olgeni@FreeBSD.org>
-
- Following the R14B04 upgrade the JAVA, X11, WX and ODBC port
- options have been set to OFF by default; this will allow to replace
- lang/erlang-lite with lang/erlang for headless operation in the
- near future.
-
- If you need any of these options, run "make config" in lang/erlang
- before upgrading, or set your make.conf accordingly.
-
-20111003:
- AFFECTS: users of math/qhull
- AUTHOR: Stephen Montgomery-Smith <stephen@FreeBSD.org>
-
- The port math/qhull has been moved to math/qhull5, and math/qhull has been
- updated to a version that is incompatible with all ports previously using
- math/qhull. If you are upgrading a port that has math/qhull as a dependency,
- please delete the port math/qhull first, so that math/qhull5 is properly
- made as a dependency.
-
-20110929:
- AFFECTS: users of net/py-zope.proxy, devel/py-zope.testing and
- devel/py-zope.interface
- AUTHOR: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
-
- Several Zope ports have been renamed for consistency with their
- upstream distributions. Please run the following commands to update
- your local installations:
-
- If you use portmaster run:
- # portmaster -o devel/py-zope.interface devel/py-zopeInterface
- # portmaster -o net/py-zope.proxy net/py-zopeproxy
- # portmaster -o devel/py-zope.testing devel/py-zopetesting
-
- If you use portupgrade run:
- # portupgrade -o devel/py-zope.interface devel/py-zopeInterface
- # portupgrade -o net/py-zope.proxy net/py-zopeproxy
- # portupgrade -o devel/py-zope.testing devel/py-zopetesting
-
-20110928:
- AFFECTS: users of 10-current
- AUTHOR: eadler@FreeBSD.org
-
- There are known issues installing ports on FreeBSD 10+ due to
- bogus assumptions by various build scripts. This will not be fixed
- until 9-RELEASE is released.
-
- There are two workarounds:
-
- 1) Set UNAME_r=9.9-CURRENT in your environment
- 2) Set REVISION="9.9" in ${SRCDIR}/sys/conf/newvers.sh
-
-20110928:
- AFFECTS: users of www/nginx-devel
- AUTHOR: osa@FreeBSD.org
-
- Note: 1.1.4 release introduces several API changes which may affect
- third-party modules.
-
-20110925:
- AFFECTS: users of lang/python*
- AUTHOR: lwhsu@FreeBSD.org
-
- The HUGE_STACK_SIZE option has been removed, now Python will use default
- thread stack size of the system. If you want to change it, specify it
- with -DTHREAD_STACK_SIZE=<size> in CFLAGS.
-
-20110925:
- AFFECTS: users of net/openldap*
- AUTHOR: ume@FreeBSD.org
-
- The security/cyrus-sasl2 was updated to 2.1.25. If the SASL option
- is enabled (disabled by default), net/openldap* must be recompiled
- after upgrading cyrus-sasl2.
-
-20110921:
- AFFECTS: users of devel/maven2 and devel/maven3
- AUTHOR: hq@FreeBSD.org
-
- The devel/maven2 and devel/maven3 now rely on a wrapper port:
- devel/maven-wrapper. If you plan to upgrade the devel/maven[23] ports, you
- will have to uninstall all of them before reinstalling them.
-
-20110917:
- AFFECTS: users of misc/tvbrowser
- AUTHOR: lme@FreeBSD.org
-
- From version 3.0.2 on TV-Browser doesn't include any plugins any longer. You
- are supposed to download the plugins manually, this also means that you need
- to download the appropriate channel sources plugin for your country. After
- installing it your previously configured channels are visible again. To do so,
- select "Tools -> Install / Update Plugins..." and choose the plugins you need.
-
-20110915:
- AFFECTS: users of dns/unbound
- AUTHOR: sem@FreeBSD.org
-
- unbound supports GOST from version 1.4.12 but only if dns/ldns was build
- with GOST support too. There is no way to check the option when unbound
- builds, so you should make sure the option is on in both unbound and lds.
-
-20110914:
- AFFECTS: users of www/asterisk-stat
- AUTHOR: flo@FreeBSD.org
-
- asterisk-stat depends on asterisk16 now, you will need to update asterisk
- and asterisk-addons to 1.6. Instructions on upgrading your configuration
- files are here:
-
- http://svnview.digium.com/svn/asterisk/branches/1.6.2/UPGRADE-1.6.txt
-
- If you use portmaster run:
- # portmaster -o net/asterisk16 net/asterisk14
- # portmaster -o net/asterisk16-addons net/asterisk14-addons
-
- If you use portupgrade run:
- # portupgrade -o net/asterisk16 net/asterisk14
- # portupgrade -o net/asterisk16-addons net/asterisk14-addons
-
-20110909:
- AFFECTS: users of net/p5-SOAP-Lite
- AUTHOR: az@FreeBSD.org
-
- SOAP::Transport::TCP is not a part of net/p5-SOAP-Lite
- distribution since version 0.714. If you need SOAP::Transport::TCP
- you should install net/p5-SOAP-Transport-TCP manually.
-
-20110901:
- AFFECTS: users of databases/db51
- AUTHOR: mandree@FreeBSD.org
-
- The databases/db51 port (Oracle Berkeley DB version 5.1) has been
- removed. Version 5.2 of the package is available in databases/db5.
- Users of ports that depend on the removed 5.1 versions are advised
- to rebuild the affected ports.
-
-20110830:
- AFFECTS: users of lang/racket
- AUTHOR: olgeni@FreeBSD.org
-
- Racket has been upgraded to version 5.1.3. Due to the recent rewrite of
- the Racket graphics handling code, it is no longer possible to build
- this port without X11.
-
- The WITHOUT_X11 switch now controls if X11 is brought in as
- USE_GNOME/LIB_DEPENDS or BUILD_DEPENDS.
-
- In the latter case you will be able to build a Racket package that can
- then be deployed on a headless server.
-
-20110829:
- AFFECTS: users of security/maia
- AUTHOR: Janky Jay, III <ek@purplehat.org>
-
- There have been many changes to the maia port, including renaming the rc
- script and variables from maia to maiad. You will need to replace any
- instances of maia with maiad in /etc/rc.conf, as well as renaming /var/amavisd
- to /var/maiad. The 'vscan' user's home directory also needs to be changed to
- /var/maiad.
-
- These can be done by:
-
- # mv /var/amavisd /var/maiad
- # sed -i.bak -e "s/^maia_/maiad_/" /etc/rc.conf
- # pw usermod vscan -d /var/maiad
-
-20110828:
- AFFECTS: users of print/cups-{base,client,image}
- AUTHOR: sahil@FreeBSD.org
-
- During the update to 1.4.8, the GNUTLS option was changed from ON to
- OFF by default. Because old configuration options are saved, users
- should re-run 'make config' and explicitly deselect the GNUTLS option
- before upgrading.
-
-20110823:
- AFFECTS: users of lang/ruby
- AUTHOR: swills@FreeBSD.org
-
- The default ruby version has been reverted from 1.9 to 1.8. If you followed
- the procedure in the 20110822 entry, you may need to follow these steps:
-
- If you use portmaster:
- # portmaster -o lang/ruby18 lang/ruby19
- # portmaster -R -r ruby-1.8
-
- If you use portupgrade:
- # portupgrade -f lang/ruby19
- # portupgrade -f lang/ruby18 # if you have it installed
- # portupgrade -f ports-mgmt/portupgrade
- # portupgrade -x ruby-1.9.\* -fr lang/ruby19
-
- If you wish to keep the 1.9 version as default, add the following lines
- to your /etc/make.conf file:
-
- #
- # Keep ruby 1.9 as default version.
- #
- RUBY_DEFAULT_VER=1.9
-
-20110823:
- AFFECTS: users of devel/libnotify and net/libproxy
- AUTHOR: gnome@FreeBSD.org
-
- libnotify and libproxy are updated with shared library bumps.
- This requires dependancies to be rebuild.
-
- # portmaster -r libnotify-0
- # portmaster -r libproxy-0
- # portmaster -a
-or
- # portupgrade -rf libnotify-0.\* libproxy-0.\*
- # portupgrade -aR
-
-20110822:
- AFFECTS: users of lang/ruby
- AUTHOR: stas@FreeBSD.org
-
- The default ruby version has been updated to 1.9. Please rebuild all ports that
- depends on it.
-
- If you use portmaster:
- # portmaster -o lang/ruby19 lang/ruby18
- # portmaster -R -r ruby-1.9
-
- If you use portupgrade:
- # portupgrade -f lang/ruby18
- # portupgrade -f lang/ruby19 # if you have it installed
- # portupgrade -f ports-mgmt/portupgrade
- # portupgrade -x ruby-1.8.\* -fr lang/ruby18
-
- After these steps are complete, you can pkg_delete ruby 1.8 if you
- no longer need it.
-
- If you wish to keep the 1.8 version as default, add the following lines
- to your /etc/make.conf file, and rebuild lang/ruby18 after that.
-
- #
- # Keep ruby 1.8 as default version.
- #
- RUBY_DEFAULT_VER=1.8
-
-20110822:
- AFFECTS: users of graphics/opencv
- AUTHOR: mm@FreeBSD.org
-
- OpenCV python module was moved to own port: graphics/py-opencv
-
-20110820:
- AFFECTS: users of www/apache* and depending ports
- AUTHOR: ohauer@FreeBSD.org
-
- The default apache version changed from www/apache13 to www/apache22.
- Users who will continue with apache13 should create the following entry
- in /etc/make.conf
-
- APACHE_PORT= www/apache13
-
-20110818:
- AFFECTS: users of mail/enigmail-* ports
- AUTHOR: ale@FreeBSD.org
-
- Like other XPIs ports, enigmail now registers itself as a global
- extension and doesn't create the XPI to be installed manually.
- Upgrading users should remove enigmail from their profile before
- installing the new port.
-
-20110815:
- AFFECTS: users of sysutils/swapexd
- AUTHOR: crees@FreeBSD.org
-
- swapexd used to clobber its config file on deinstall, unfortunately this will
- not be fixed in installed packages. Back up your config before updating, or
- you will lose it!
-
- # cp /usr/local/etc/swapexd/swapexd.conf ~/swapexd.conf.bak
-
-20110808:
- AFFECTS: users of net-mgmt/zenoss
- AUTHOR: pphillips@experts-exchange.com
-
- Some functionality of zenoss requires a valid shell. The FreeBSD port until
- now was installing a user account without a shell. To fix your existing
- installation, please run the following command as root:
-
- # pw usermod zenoss -s /bin/sh -d /usr/local/zenoss
-
-20110808:
- AFFECTS: users of dns/powerdns
- AUTHOR: tremere@cainites.net
-
- The port has been updated to PowerDNS 3.0, which includes support for DNSSEC.
-
- Before upgrading please read the following:
- http://doc.powerdns.com/upgrades.html#from2.9to3.0
-
- Make sure to read the documentation and wiki on http://powerdnssec.org/ on
- how to enable DNSSEC mode in the configuration-file and for the necessary
- database changes.
-
- Take note that not all backends support DNSSEC. The ones that do are BIND,
- SQLite3 and Generic MySQL and PgSQL.
-
-20110808:
- AFFECTS: users of security/amavisd-new
- AUTHOR: sahil@FreeBSD.org
-
- Along with new features and bug fixes, amavisd-new 2.7.0 introduces some
- incompatibilities with previous releases. Several variable defaults, SQL
- schemas, and other changes warrant a careful review of the RELEASE_NOTES.
- Also note that helper programs amavis.c and amavis-milter.c are no longer
- distributed with this package; for milter functionality, please shift to
- the dedicated security/amavisd-milter port.
-
-20110731:
- AFFECTS: users of lang/guile
- AUTHOR: jlaffaye@FreeBSD.org
-
- guile has been updated to version 1.8.8. Please rebuild all ports that
- depends on it.
-
- If you use portmaster:
- # portmaster -r guile
-
- If you use portupgrade:
- # portupgrade -fr lang/guile
-
-20110731:
- AFFECTS: users of www/typo3
- AUTHOR: Helmut Schneider <jumper99@gmx.de>
-
- www/typo3 has been repocopied to www/typo345. If you need to continue with
- the old stable version please run
-
- # portmaster -o www/typo345 www/typo3
- or
- # portupgrade -o www/typo345 www/typo3
-
- Please remember to change the path of your config files too.
-
-20110730:
- AFFECTS: users of x11-toolkits/gtk20
- AUTHOR: gnome@FreeBSD.org
-
- The gtk-update-icon-cache utility has been split out of the gtk20 port.
- Use the following instructions to update your system.
-
- # pkg_delete -f gtk-2.\*
- # portmaster x11-toolkits/gtk20
- # portmaster -a
-
-20110726:
- AFFECTS: users of devel/msp430-gcc
- AUTHOR: lev@FreeBSD.org
-
- msp430-gcc was updated to lates gcc-4.5.3 version.
- If you want to use old gcc-3.4.4, run command:
-
- # portmaster -o devel/msp430-gcc3 devel/msp430-gcc
- or
- # portupgrade -o devel/msp430-gcc3 devel/msp430-gcc
-
- before updating devel/msp430-libc port.
-
-20110721:
- AFFECTS: users of games/megaglest
- AUTHOR: smoeller@nichthelfer.de
-
- If you upgraded from version 3.4.0, your personal settings are stored in
- ~/.megaglest3.4.0. If you copy glestuser.ini and glestuserkeys.ini to
- ~/.megaglest, you will have your old settings again.
-
-20110721:
- AFFECTS: users of security/gpgme
- AUTHOR: jlaffaye@FreeBSD.org
-
- gpgme has been updated to version 1.3.1. Please rebuild all ports that depends
- on it.
-
- If you use portmaster:
- # portmaster -r gpgme
-
- If you use portupgrade:
- # portupgrade -fr security/gpgme
-
-20110718:
- AFFECTS: users of hungarian/hunspell
- AUTHOR: jlaffaye@FreeBSD.org
-
- The hunspell port has been moved to textproc/hunspell.
- To update the installed port run the command
-
- # portmaster -o textproc/hunspell hungarian/hunspell
- or
- # portupgrade -o textproc/hunspell hungarian/hunspell
-
-20110711:
- AFFECTS: users of java/openjdk6
- AUTHOR: jkim@FreeBSD.org
-
- java/openjdk6 has been updated to b23 and "WEB" option (for web browser
- plug-in and Java Web Start) has been deprecated. If you need the same
- functionality, rebuild the port with "ICEDTEA" option first, then install
- a new port java/icedtea-web with "PLUGIN" option (default). Also, if you
- have a symlink to the previous IcedTeaPlugin.so in ~/.mozilla/plugins,
- for example, you need to remove it. Note system-wide symlinks are now
- automatically created by java/icedtea-web for your convenience.
-
-20110711:
- AFFECTS: users of www/p5-libwww
- AUTHOR: mandree@FreeBSD.org
-
- portmaster cannot process the upgrade of www/p5-libwww from version
- 5 to version 6. To upgrade p5-libwww, use portupgrade instead, or
- deinstall p5-libwww before reinstalling:
-
- If you use portmaster:
- # pkg_delete -f 'p5-libwww-5*' ; portmaster www/p5-libwww
-
- If you use portupgrade, no special treatment is necessary.
-
-20110711:
- AFFECTS: users of devel/icu
- AUTHOR: bapt@FreeBSD.org
-
- icu has been updated to version 4.8. Please rebuild all ports that depends
- on it.
-
- If you use portmaster:
- # portmaster -r icu
-
- If you use portupgrade:
- # portupgrade -fr devel/icu
-
-20110706:
- AFFECTS: users of multimedia/zoneminder
- AUTHOR: bsam@FreeBSD.org
-
- RC script was renamed from zm to zoneminder. So do variables at
- /etc/rc.conf[.local]. One should fix the latter file.
-
-20110705:
- AFFECTS: users of security/libgcrypt and any port that depends on it
- AUTHOR: swills@FreeBSD.org
-
- The libgcrypt port has been updated to 1.5.0 and all shared libraries
- versions have been bumped. So you need to rebuild all applications that
- depend on libgcrypt. Do something like:
-
- # portmaster -r libgcrypt
- or
- # portupgrade -rf libgcrypt
-
-20110703:
- AFFECTS: users of print/lyx and print/lyx-devel
- AUTHOR: makc@FreeBSD.org
-
- print/lyx has been updated to 2.0. print/lyx16 has been added to ports tree
- for those who prefers to stick with the last stable in lyx-1.6.x series.
-
-20110630:
- AFFECTS: users of math/octave-forge* and benchmarks/octave-forge-benchmark
- AUTHOR: stephen@FreeBSD.org
-
- The octave-forge* port structure has been completely redesigned. This was
- to make them compatible with portmaster and other port installation tools.
-
- Before using the new octave-forge* ports, the old octave-forge* ports must
- be completely removed with, for example, the command:
-
- # pkg_delete "octave-forge*"
-
-20110630:
- AFFECTS: users of mail/thunderbird
- AUTHOR: gecko@FreeBSD.org
-
- The mail/thunderbird port has been updated to 5.0. If you want to stay with
- Thunderbird 3.1 please run:
-
- # portupgrade -o mail/thunderbird3 mail/thunderbird
- # portupgrade -o mail/thunderbird3-i18n mail/thunderbird-i18n (if installed)
- or
- # portmaster -o mail/thunderbird3 mail/thunderbird
- # portmaster -o mail/thunderbird3-i18n mail/thunderbird-i18n (if installed)
-
- Do not select the OPTIMIZED_CFLAGS option on a system with less then
- 2 GB of RAM otherwise you will run out of memory during the build.
-
- Please make sure all your addons are compatible with Thunderbird 5.0 and
- backup your ~/.thunderbird directory prior to the first launch of Thunderbird
- 5.0.
-
-20110630:
- AFFECTS: users of x11/wbar
- AUTHOR: nivit@FreeBSD.org
-
- x11/wbar has been updated to 2.2.2. Before launching the program, please
- backup your configuration file (~/.wbar), and then use the command wbar-config
- to set your preferences and change the path of the old icons (in particular
- the Bar image).
-
-20110629:
- AFFECTS: users of graphics/opencv
- AUTHOR: mm@FreeBSD.org
-
- OpenCV was updated to version 2.3.0rc and to avoid circular dependencies
- split into two ports: graphics/opencv-core and graphics/opencv
-
- Before updating please uninstall the graphics/opencv port first because
- the new dependency graphics/opencv-core contains conflicting files with
- the old port graphics/opencv.
-
-20110626:
- AFFECTS: users of mail/p5-Mail-SpamAssassin
- AUTHOR: wxs@FreeBSD.org
-
- mail/p5-Mail-SpamAssassin has been updated to version 3.3.2. Prior to
- starting spamd you must run sa-update, or spamd will fail to start.
-
-20110624:
- AFFECTS: users of deskutils/opengoo
- AUTHOR: acm@FreeBSD.org
-
- desktutils/opengoo has been renamed to deskutils/fengoffice, because
- The OpenGoo name was changed to Feng Office Community Edition.
-
- If you want migrate from opengoo to fengoffice, please see upgrading
- section at:
-
- http://fengoffice.com/web/wiki/doku.php/installation
-
-20110623:
- AFFECTS: users of databases/py-sqlalchemy
- AUTHOR: nivit@FreeBSD.org
-
- The version 0.6 of SQLAlchemy has been moved to databases/py-sqlalchemy06,
- while the port databases/py-sqlalchemy now holds the series 0.7.X.
- To update the installed port run the command
-
- # portmaster -o databases/py-sqlalchemy06 databases/py-sqlalchemy
- or
- # portupgrade -o databases/py-sqlalchemy06 databases/py-sqlalchemy
-
-20110622:
- AFFECTS: users of lang/perl5.12
- AUTHOR: skv@FreeBSD.org
-
- lang/perl5.12 has been updated to 5.12.4. You should update everything
- that depends on perl. The easiest way to do that is to use
- "perl-after-upgrade" script supplied with lang/perl5.12.
- Please see its manual page for details.
-
- If you want to switch to lang/perl5.12 from lang/perl5.{8,10} please
- follow instructions in the entry 20100715 in this file.
-
-20110620:
- AFFECTS: users of net/samba35
- AUTHOR: timur@FreeBSD.org
-
- A bug, introduced by local patch to pam_winbind.so, that made it coredump
- was spotted by Martin Minkus. It is fixed in the 3.5.9 version of the port.
- So, if pam_winbind.so started to work for you - send him kudos.
-
-20110619:
- AFFECTS: users of irc/ezbounce and irc/ezbounce-devel
- AUTHOR: flo@FreeBSD.org
-
- irc/ezbounce-devel was moved to irc/ezbounce as the version previously in
- irc/ezbounce has been broken for some time and the distfile is not available
- anymore.
-
- If you are upgrading from a 1.0X version make sure to verify that your config
- still works. There is basic compatibility for old config files but a lot has
- changed, see http://linuxftw.com/ezbounce/files/CHANGES
-
- If you run irc/ezbounce-devel you need to run one of the following commands:
-
- # portmaster -o irc/ezbounce irc/ezbounce-devel
- or
- # portupgrade -o irc/ezbounce irc/ezbounce-devel
-
-20110619:
- AFFECTS: users of lang/perl5.14
- AUTHOR: skv@FreeBSD.org
-
- lang/perl5.14 has been updated to 5.14.1. You should update everything
- that depends on perl. The easiest way to do that is to use
- "perl-after-upgrade" script supplied with lang/perl5.14.
- Please see its manual page for details.
-
- If you want to switch to lang/perl5.14 from lang/perl5.{8,10,12} please
- follow instructions in the entry 20110517 in this file.
-
-20110618:
- AFFECTS: users of mail/mailscanner
- AUTHOR: crees@FreeBSD.org
-
- mail/mailscanner no longer requires running of any renew-* targets to
- update the config files / wrapper scripts; it is now automatically
- performed as the port is installed -- these targets have been removed.
-
- As an added bonus, the binary package now performs these steps as well,
- in case you don't have a portstree handy.
-
- Before upgrading, please backup your PREFIX/etc/MailScanner,
- PREFIX/share/MailScanner and PREFIX/libexec/MailScanner if you
- have customised any of these directories, just in case.
-
-20110608:
- AFFECTS: users of security/amavisd-milter
- AUTHOR: delphij@FreeBSD.org
-
- A change have been made to rc.d script for amavisd-milter makes it to
- specify -s explicitly. If you used to override the location of listening
- socket by specifying -s, please migrate to the new way (specify
- amavisd_milter_socket in /etc/rc.conf).
-
-20110607:
- AFFECTS: users of devel/p5-Moose and devel/p5-Class-MOP
- AUTHOR: az@FreeBSD.org
-
- p5-Moose has been updated to 2.0007. Now p5-Class-MOP is a part of the
- p5-Moose distribution. Manual intervention of the update procedure is
- required:
-
- # portmaster -o devel/p5-Moose devel/p5-Class-MOP
- # portmaster -R -r p5-Moose-\*
-
- or do the same things with portupgrade.
-
- To check everything went fine you can run:
- # perl -Moose\ 999
- and
- # perl -MClass::MOP\ 999
- in both cases you should see output:
- version 999 required--this is only version 2.0007
-
-20110606:
- AFFECTS: users of mail/sympa
- AUTHOR: crees@FreeBSD.org
-
- Sympa previously used to install to ${PREFIX}/sympa, which goes against
- the general rules for hierarchy. Most files which were previously found
- in ${PREFIX}/sympa should now be found in ${PREFIX}/libexec/sympa.
-
- Any configuration in httpd.conf files etc will need to be updated to the
- new directory.
-
- Before upgrade, it is advisable to back up configuration files
- ${PREFIX}/etc/sympa.conf and wwsympa.conf since previous versions wipe these
- out on deinstall.
-
-20110606:
- AFFECTS: users of databases/mariadb
- AUTHOR: dougb@FreeBSD.org
-
- The mariadb port has been split into -client, -scripts, and -server ports
- ala mysql. You can now install only the parts that you need.
-
- If you have devel/libevent installed along with mariadb you should do
- something like:
-
- pkg_delete mariadb\*
- portmaster devel/libevent
-
-20110605:
- AFFECTS: users of security/gnutls and any port that depends on it
- AUTHOR: novel@FreeBSD.org
-
- gnutls has been updated to 2.12.6.1 and all shared libraries versions have
- been bumped. So you need to rebuild all applications that depend on
- gnutls. Do something like:
-
- portupgrade -rf gnutls
- portmaster -r gnutls
-
-20110605:
- AFFECTS: users of sysutils/zfsnap
- AUTHOR: Aldis Berjoza <aldis@bsdroot.lv>
-
- There is an issue with zpool v28 (currently only on 9-CURRENT, or
- 8-STABLE systems that have been manually patched) that affects
- zfSnap. If you are using v28 make sure to use the -zpool28fix flag
- with zfsnap to work around the problem.
-
- For more information please see:
-
- http://wiki.bsdroot.lv/zfsnap#zpool_v28_zfs_destroy_-r_bug
-
-20110602:
- AFFECTS: users of net/freeradius
*** 2213 LINES SKIPPED ***