FreeBSD-main-amd64-test - Build #25609 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #25610 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #25608 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Sun, 20 Oct 2024 18:19:05 UTC
FreeBSD-main-amd64-test - Build #25609 (eaab882600d3cf1562a4030e7c91ad3e0861937b) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25609/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25609/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25609/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

1c95ec17cae22fb76d4e93c9eada78e03ca1bca6 by zlei:
ifconfig: Fix wrong indentation for the status of pfsync(4)

3dc6188294dd4f907f5f63cc3f1a79ea20dba99f by markj:
cdefs: Use __has_feature to gate the definition of __nosanitize*

eaab882600d3cf1562a4030e7c91ad3e0861937b by markj:
Revert "Reapply "sbin/ping: allow normal users to specify larger



The end of the build log:

[...truncated 3.81 MiB...]
epair0b: link state changed to UP
epair1a: Ethernet address: 02:d6:e5:e7:c5:0a
epair1b: Ethernet address: 02:d6:e5:e7:c5:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0b: promiscuous mode enabled
carp: 1@epair0b: INIT -> BACKUP (initialization complete)
epair1b: promiscuous mode enabled
carp: 1@epair1b: INIT -> BACKUP (initialization complete)
carp: 1@epair0b: BACKUP -> MASTER (master timed out)
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
carp: 1@epair0b: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0b: promiscuous mode disabled
epair1a: link state changed to DOWN
carp: 1@epair1b: BACKUP -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair1b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair1b: promiscuous mode disabled
passed  [6.464s]
sys/netinet/carp:vrrp_v6  ->  bridge0: Ethernet address: 58:9c:fc:10:ff:a7
epair0a: Ethernet address: 02:74:f4:22:91:0a
epair0b: Ethernet address: 02:74:f4:22:91:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:c2:55:09:97:0a
epair1b: Ethernet address: 02:c2:55:09:97:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0b: promiscuous mode enabled
carp: 1@epair0b: INIT -> BACKUP (initialization complete)
epair1b: promiscuous mode enabled
carp: 1@epair1b: INIT -> BACKUP (initialization complete)
carp: 1@epair0b: BACKUP -> MASTER (master timed out)
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
carp: 1@epair0b: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0b: promiscuous mode disabled
epair1a: link state changed to DOWN
carp: 1@epair1b: BACKUP -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair1b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair1b: promiscuous mode disabled
passed  [6.454s]
sys/netinet/carp.py:TestCarp::test_source_mac  ->  epair0a: Ethernet address: 02:9c:4a:f1:85:0a
epair0b: Ethernet address: 02:9c:4a:f1:85:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
carp: 1@epair0a: INIT -> BACKUP (initialization complete)
carp: 1@epair0a: BACKUP -> MASTER (master timed out)
carp: 1@epair0a: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0a: promiscuous mode disabled
passed  [4.543s]
sys/netinet/carp.py:TestCarp::test_source_mac_vrrp  ->  epair0a: Ethernet address: 02:6d:f5:97:ad:0a
epair0b: Ethernet address: 02:6d:f5:97:ad:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
carp: 1@epair0a: INIT -> BACKUP (initialization complete)
carp: 1@epair0a: BACKUP -> MASTER (master timed out)
carp: 1@epair0a: MASTER -> INIT (hardware interface down)
carp: demoted by 240 to 240 (interface down)
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
carp: demoted by -240 to 0 (vhid removed)
epair0a: promiscuous mode disabled
passed  [5.050s]
sys/netinet/divert:ipdivert_ip_input_local_success  ->  epair0a: Ethernet address: 02:a9:b1:71:80:0a
epair0b: Ethernet address: 02:a9:b1:71:80:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
tun0: loop detected
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.097s]
sys/netinet/divert:ipdivert_ip_output_remote_success  ->  epair0a: Ethernet address: 02:7e:23:28:80:0a
epair0b: Ethernet address: 02:7e:23:28:80:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [1.056s]
sys/netinet/fibs:fibs_ifroutes1_success  ->  epair0a: Ethernet address: 02:e8:8e:ba:fe:0a
epair0b: Ethernet address: 02:e8:8e:ba:fe:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.111s]
sys/netinet/fibs_test:arpresolve_checks_interface_fib  ->  skipped: firewalls interfere with this test  [0.033s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: 58:9c:fc:10:9f:68
tap1: Ethernet address: 58:9c:fc:10:ff:fd
passed  [0.053s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: 58:9c:fc:10:9f:68
tap1: Ethernet address: 58:9c:fc:10:ff:fd
passed  [0.056s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib  ->  tap0: Ethernet address: 58:9c:fc:10:9f:68
passed  [0.050s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6  ->  tap0: Ethernet address: 58:9c:fc:10:9f:68
passed  [0.051s]
sys/netinet/fibs_test:same_ip_multiple_ifaces  ->  tap0: Ethernet address: 58:9c:fc:10:9f:68
tap1: Ethernet address: 58:9c:fc:10:ff:fd
tap2: Ethernet address: 58:9c:fc:10:d0:70
tap3: Ethernet address: 58:9c:fc:10:ff:fb
expected_failure: kern/189088 Assigning the same IP to multiple interfaces in different FIBs creates a host route for only one: atf-check failed; see the output of the test for details  [0.062s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0  ->  tap0: Ethernet address: 58:9c:fc:10:9f:68
tap1: Ethernet address: 58:9c:fc:10:ff:fd
tap2: Ethernet address: 58:9c:fc:10:d0:70
tap3: Ethernet address: 58:9c:fc:10:ff:fb
passed  [0.043s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6  ->  tap0: Ethernet address: 58:9c:fc:10:9f:68
tap1: Ethernet address: 58:9c:fc:10:ff:fd
tap0: Ethernet address: 58:9c:fc:10:9f:68
tap1: Ethernet address: 58:9c:fc:10:ff:fd
passed  [0.087s]
sys/netinet/fibs_test:slaac_on_nondefault_fib6  ->  skipped: firewalls interfere with this test  [0.038s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: 58:9c:fc:10:9f:68


Fatal trap 9: general protection fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer	= 0x20:0xffffffff82911666
stack pointer	        = 0x28:0xfffffe008e7d7840
frame pointer	        = 0x28:0xfffffe008e7d7850
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (netlink_socket (PID)
rdi: fffffe00111df7f0 rsi: 0000000000000004 rdx: ffffffff8294649c
rcx: 0000000000000183  r8: fffff8008012f740  r9: fffff8008012f740
rax: deadc0dedeadc0de rbx: fffff80141926500 rbp: fffffe008e7d7850
r10: 0000000000000000 r11: 0000000000000004 r12: fffff80141a13390
r13: fffff8000352ddc0 r14: fffff80141926880 r15: fffff80141926500
trap number		= 9
panic: general protection fault
cpuid = 0
time = 1729448344
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008e7d7580
vpanic() at vpanic+0x13f/frame 0xfffffe008e7d76b0
panic() at panic+0x43/frame 0xfffffe008e7d7710
trap_fatal() at trap_fatal+0x40b/frame 0xfffffe008e7d7770
calltrap() at calltrap+0x8/frame 0xfffffe008e7d7770
--- trap 0x9, rip = 0xffffffff82911666, rsp = 0xfffffe008e7d7840, rbp = 0xfffffe008e7d7850 ---
sctp_add_ifa_to_ifn() at sctp_add_ifa_to_ifn+0x46/frame 0xfffffe008e7d7850
sctp_add_addr_to_vrf() at sctp_add_addr_to_vrf+0x432/frame 0xfffffe008e7d78c0
sctp_addr_change() at sctp_addr_change+0xde/frame 0xfffffe008e7d7910
rt_addrmsg() at rt_addrmsg+0x121/frame 0xfffffe008e7d79e0
in_addprefix() at in_addprefix+0x157/frame 0xfffffe008e7d7a30
in_control_ioctl() at in_control_ioctl+0xadb/frame 0xfffffe008e7d7ad0
rtnl_handle_addr() at rtnl_handle_addr+0x40b/frame 0xfffffe008e7d7cd0
rtnl_handle_message() at rtnl_handle_message+0x195/frame 0xfffffe008e7d7d30
nl_taskqueue_handler() at nl_taskqueue_handler+0x588/frame 0xfffffe008e7d7e40
taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008e7d7ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008e7d7ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008e7d7f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008e7d7f30
--- trap 0x127e43d0, rip = 0x3ed3127e4370, rsp = 0x3ed3127e43c0, rbp = 0x3ed3127e42f0 ---
KDB: enter: panic
[ thread pid 0 tid 102196 ]
Stopped at      kdb_enter+0x33: movq    $0,0x1054b02(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0x9f6e00
curthread    = 0xfffff8008012f740: pid 0 tid 102196 critnest 1 "netlink_socket (PID"
curpcb       = 0xfffff8008012fc60
fpcurthread  = none
idlethread   = 0xfffff8010260a740: tid 100003 "idle: cpu0"
self         = 0xffffffff82410000
curpmap      = 0xffffffff81b9be30
tssp         = 0xffffffff82410384
rsp0         = 0xfffffe008e7d8000
kcr3         = 0x800000000238c002
ucr3         = 0xffffffffffffffff
scr3         = 0x17594a842
gs32p        = 0xffffffff82410404
ldt          = 0xffffffff82410444
tss          = 0xffffffff82410434
curvnet      = 0xfffff800030edf00
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 19m52s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-25609' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-zfs-tests.sh
x ./run.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins16859558434465937350.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'eaab882600d3cf1562a4030e7c91ad3e0861937b', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../eaab882600d3cf1562a4030e7c91ad3e0861937b/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address