FreeBSD-main-amd64-test - Build #25832 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #25833 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #25831 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Fri, 13 Dec 2024 15:22:26 UTC
FreeBSD-main-amd64-test - Build #25832 (a1097094c4c5d810287aca092f4ab5f9f86a426a) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25832/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25832/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25832/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

a1097094c4c5d810287aca092f4ab5f9f86a426a by emaste:
newvers: Set explicit git revision length



The end of the build log:

[...truncated 3.87 MiB...]
carp: demoted by -240 to 0 (pfsync destroy)
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [3.514s]
sys/netpfil/pf/pfsync:defer  ->  epair0a: Ethernet address: 02:7b:b3:a1:af:0a
epair0b: Ethernet address: 02:7b:b3:a1:af:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:d1:d2:16:6f:0a
epair1b: Ethernet address: 02:d1:d2:16:6f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:23:a4:85:ef:0a
epair2b: Ethernet address: 02:23:a4:85:ef:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
carp: demoted by 240 to 240 (pfsync bulk start)
epair0b: promiscuous mode enabled
epair1b: promiscuous mode enabled
epair2b: promiscuous mode enabled
epair2b: promiscuous mode disabled
epair0b: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: promiscuous mode enabled
epair1b: promiscuous mode enabled
epair2b: promiscuous mode enabled
epair2b: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
carp: demoted by -240 to 0 (pfsync destroy)
passed  [8.087s]
sys/netpfil/pf/pfsync:ipsec  ->  epair0a: Ethernet address: 02:36:cb:3a:ed:0a
epair0b: Ethernet address: 02:36:cb:3a:ed:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:64:be:66:e7:0a
epair1b: Ethernet address: 02:64:be:66:e7:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:9b:dc:42:ea:0a
epair2b: Ethernet address: 02:9b:dc:42:ea:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
carp: demoted by 240 to 240 (pfsync bulk start)
carp: demoted by 240 to 240 (pfsync bulk start)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 0 (pfsync bulk done)
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [6.587s]
sys/netpfil/pf/pfsync:pbr  ->  bridge0: Ethernet address: f2:91:da:bd:f9:7a
bridge1: Ethernet address: fa:3d:04:f2:08:3f
bridge2: Ethernet address: ce:19:cc:6c:b5:75
epair0a: Ethernet address: 02:9f:09:6a:a9:0a
epair0b: Ethernet address: 02:9f:09:6a:a9:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:70:20:22:15:0a
epair1b: Ethernet address: 02:70:20:22:15:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:f8:da:62:4f:0a
epair2b: Ethernet address: 02:f8:da:62:4f:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:db:ea:c2:24:0a
epair3b: Ethernet address: 02:db:ea:c2:24:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair4a: Ethernet address: 02:f6:aa:d8:8d:0a
epair4b: Ethernet address: 02:f6:aa:d8:8d:0b
epair4a: link state changed to UP
epair4b: link state changed to UP
epair5a: Ethernet address: 02:3a:ab:47:a4:0a
epair5b: Ethernet address: 02:3a:ab:47:a4:0b
epair5a: link state changed to UP
epair5b: link state changed to UP
epair6a: Ethernet address: 02:b2:f6:95:ed:0a
epair6b: Ethernet address: 02:b2:f6:95:ed:0b
epair6a: link state changed to UP
epair6b: link state changed to UP
epair7a: Ethernet address: 02:da:e4:25:40:0a
epair7b: Ethernet address: 02:da:e4:25:40:0b
epair7a: link state changed to UP
epair7b: link state changed to UP
epair8a: Ethernet address: 02:fc:58:d4:42:0a
epair8b: Ethernet address: 02:fc:58:d4:42:0b
epair8a: link state changed to UP
epair8b: link state changed to UP
epair9a: Ethernet address: 02:ee:6d:c6:5f:0a
epair9b: Ethernet address: 02:ee:6d:c6:5f:0b
epair9a: link state changed to UP
epair9b: link state changed to UP
epair10a: Ethernet address: 02:bf:d8:f3:0b:0a
epair10b: Ethernet address: 02:bf:d8:f3:0b:0b
epair10a: link state changed to UP
epair10b: link state changed to UP
epair11a: Ethernet address: 02:63:1b:8a:b6:0a
epair11b: Ethernet address: 02:63:1b:8a:b6:0b
epair11a: link state changed to UP
epair11b: link state changed to UP
epair2b: promiscuous mode enabled
epair3b: promiscuous mode enabled
epair4b: promiscuous mode enabled
bridge0: link state changed to UP
epair5b: promiscuous mode enabled
epair6b: promiscuous mode enabled
epair7b: promiscuous mode enabled
epair8b: promiscuous mode enabled
bridge1: link state changed to UP
epair9b: promiscuous mode enabled
epair10b: promiscuous mode enabled
epair11b: promiscuous mode enabled
bridge2: link state changed to UP
epair3a: promiscuous mode enabled
carp: 10@epair3a: INIT -> BACKUP (initialization complete)
epair5a: promiscuous mode enabled
carp: 11@epair5a: INIT -> BACKUP (initialization complete)
epair0a: changing name to 'if_pfsync'
epair3a: changing name to 'if_br0'
epair5a: changing name to 'if_br1'
carp: demoted by 240 to 240 (pfsync bulk start)
epair4a: promiscuous mode enabled
carp: 10@epair4a: INIT -> BACKUP (initialization complete)
epair6a: promiscuous mode enabled
carp: 11@epair6a: INIT -> BACKUP (initialization complete)
epair0b: changing name to 'if_pfsync'
epair4a: changing name to 'if_br0'
epair6a: changing name to 'if_br1'
carp: demoted by 240 to 240 (pfsync bulk start)
epair7a: promiscuous mode enabled
carp: 21@epair7a: INIT -> BACKUP (initialization complete)
epair9a: promiscuous mode enabled
carp: 22@epair9a: INIT -> BACKUP (initialization complete)
epair1a: changing name to 'if_pfsync'
epair7a: changing name to 'if_br1'
epair9a: changing name to 'if_br2'
carp: demoted by 240 to 240 (pfsync bulk start)
epair8a: promiscuous mode enabled
carp: 21@epair8a: INIT -> BACKUP (initialization complete)
epair10a: promiscuous mode enabled
carp: 22@epair10a: INIT -> BACKUP (initialization complete)
epair1b: changing name to 'if_pfsync'
epair8a: changing name to 'if_br1'
epair10a: changing name to 'if_br2'
carp: demoted by 240 to 240 (pfsync bulk start)
carp: 10@if_br0: BACKUP -> MASTER (master timed out)
carp: 11@if_br1: BACKUP -> MASTER (master timed out)
carp: 21@if_br1: BACKUP -> MASTER (master timed out)
carp: 22@if_br2: BACKUP -> MASTER (master timed out)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 0 (pfsync bulk done)
carp: demoted by -240 to 0 (pfsync bulk done)
FATAL: command execution failed
java.nio.channels.ClosedChannelException
	at org.jenkinsci.remoting.protocol.NetworkLayer.onRecvClosed(NetworkLayer.java:155)
	at org.jenkinsci.remoting.protocol.impl.NIONetworkLayer.ready(NIONetworkLayer.java:181)
	at org.jenkinsci.remoting.protocol.IOHub$OnReady.run(IOHub.java:804)
	at jenkins.util.ContextResettingExecutorService$1.run(ContextResettingExecutorService.java:28)
	at jenkins.security.ImpersonatingExecutorService$1.run(ImpersonatingExecutorService.java:68)
	at jenkins.util.ErrorLoggingExecutorService.lambda$wrap$0(ErrorLoggingExecutorService.java:51)
	at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1136)
	at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:635)
	at java.base/java.lang.Thread.run(Thread.java:840)
Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@5bd0f5a8:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:24515": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:24515 failed. The channel is closing down or has closed down
	at hudson.remoting.Channel.call(Channel.java:1105)
	at hudson.remoting.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:306)
	at jdk.proxy2/jdk.proxy2.$Proxy159.isAlive(Unknown Source)
	at hudson.Launcher$RemoteLauncher$ProcImpl.isAlive(Launcher.java:1212)
	at hudson.Launcher$RemoteLauncher$ProcImpl.join(Launcher.java:1204)
	at hudson.tasks.CommandInterpreter.join(CommandInterpreter.java:195)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:145)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92)
	at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
	at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:817)
	at hudson.model.Build$BuildExecution.build(Build.java:199)
	at hudson.model.Build$BuildExecution.doRun(Build.java:164)
	at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:526)
	at hudson.model.Run.execute(Run.java:1894)
	at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
	at hudson.model.ResourceController.execute(ResourceController.java:101)
	at hudson.model.Executor.run(Executor.java:446)
FATAL: Unable to delete script file /tmp/jenkins9732063919816729138.sh
java.nio.channels.ClosedChannelException
	at org.jenkinsci.remoting.protocol.NetworkLayer.onRecvClosed(NetworkLayer.java:155)
	at org.jenkinsci.remoting.protocol.impl.NIONetworkLayer.ready(NIONetworkLayer.java:181)
	at org.jenkinsci.remoting.protocol.IOHub$OnReady.run(IOHub.java:804)
	at jenkins.util.ContextResettingExecutorService$1.run(ContextResettingExecutorService.java:28)
	at jenkins.security.ImpersonatingExecutorService$1.run(ImpersonatingExecutorService.java:68)
	at jenkins.util.ErrorLoggingExecutorService.lambda$wrap$0(ErrorLoggingExecutorService.java:51)
	at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1136)
	at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:635)
	at java.base/java.lang.Thread.run(Thread.java:840)
Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@5bd0f5a8:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:24515": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:24515 failed. The channel is closing down or has closed down
	at hudson.remoting.Channel.call(Channel.java:1105)
	at hudson.FilePath.act(FilePath.java:1228)
	at hudson.FilePath.act(FilePath.java:1217)
	at hudson.FilePath.delete(FilePath.java:1764)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:163)
	at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:92)
	at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
	at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:817)
	at hudson.model.Build$BuildExecution.build(Build.java:199)
	at hudson.model.Build$BuildExecution.doRun(Build.java:164)
	at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:526)
	at hudson.model.Run.execute(Run.java:1894)
	at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
	at hudson.model.ResourceController.execute(ResourceController.java:101)
	at hudson.model.Executor.run(Executor.java:446)
Build step 'Execute shell' marked build as failure
FATAL: Channel "hudson.remoting.Channel@5bd0f5a8:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:24515": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:24515 failed. The channel is closing down or has closed down
java.nio.channels.ClosedChannelException
	at org.jenkinsci.remoting.protocol.NetworkLayer.onRecvClosed(NetworkLayer.java:155)
	at org.jenkinsci.remoting.protocol.impl.NIONetworkLayer.ready(NIONetworkLayer.java:181)
	at org.jenkinsci.remoting.protocol.IOHub$OnReady.run(IOHub.java:804)
	at jenkins.util.ContextResettingExecutorService$1.run(ContextResettingExecutorService.java:28)
	at jenkins.security.ImpersonatingExecutorService$1.run(ImpersonatingExecutorService.java:68)
	at jenkins.util.ErrorLoggingExecutorService.lambda$wrap$0(ErrorLoggingExecutorService.java:51)
	at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1136)
	at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:635)
	at java.base/java.lang.Thread.run(Thread.java:840)
Caused: hudson.remoting.ChannelClosedException: Channel "hudson.remoting.Channel@5bd0f5a8:JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:24515": Remote call on JNLP4-connect connection from lancelot.nyi.freebsd.org/[2610:1c1:1:607c:0:0:16:40]:24515 failed. The channel is closing down or has closed down
	at hudson.remoting.Channel.call(Channel.java:1105)
	at hudson.Launcher$RemoteLauncher.kill(Launcher.java:1147)
	at hudson.model.AbstractBuild$AbstractBuildExecution.run(AbstractBuild.java:538)
	at hudson.model.Run.execute(Run.java:1894)
	at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:44)
	at hudson.model.ResourceController.execute(ResourceController.java:101)
	at hudson.model.Executor.run(Executor.java:446)
[PostBuildScript] - [INFO] Executing post build scripts.
[PostBuildScript] - [INFO] Build does not have any of the results [SUCCESS]. Did not execute build step #0.
ERROR: Step ‘Publish JUnit test result report’ failed: no workspace for FreeBSD-main-amd64-test #25832
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address