FreeBSD-stable-14-amd64-test - Build #6 - Still Failing
Date: Mon, 04 Sep 2023 03:13:57 UTC
FreeBSD-stable-14-amd64-test - Build #6 (d6fec2dacf80a73dbfd543615350c83fdf810015) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/6/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/6/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/6/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
d6fec2dacf80a73dbfd543615350c83fdf810015 by gjb:
release: remove arm/armv6 RPI-B configuration file
The end of the build log:
[...truncated 4.23 MB...]
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [3.972s]
sys/netinet6/frag6/frag6_20:frag6_20 -> epair0a: Ethernet address: 02:5c:6b:ef:fb:0a
epair0b: Ethernet address: 02:5c:6b:ef:fb:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [4.944s]
sys/netlink/test_netlink_message_writer.py:__test_cases_list__ -> broken: Test program did not exit cleanly [0.003s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type[SOCK_DGRAM] -> epair0a: Ethernet address: 02:af:4a:d2:a1:0a
epair0b: Ethernet address: 02:af:4a:d2:a1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.351s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type[SOCK_RAW] -> epair0a: Ethernet address: 02:ea:c4:4a:e0:0a
epair0b: Ethernet address: 02:ea:c4:4a:e0:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.358s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type_unsup[SOCK_RDM] -> epair0a: Ethernet address: 02:c2:cb:4d:d7:0a
epair0b: Ethernet address: 02:c2:cb:4d:d7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.357s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type_unsup[SOCK_SEQPACKET] -> epair0a: Ethernet address: 02:e1:70:29:48:0a
epair0b: Ethernet address: 02:e1:70:29:48:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.347s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type_unsup[SOCK_STREAM] -> epair0a: Ethernet address: 02:2f:24:00:36:0a
epair0b: Ethernet address: 02:2f:24:00:36:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.362s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_create_iface_attrs -> epair0a: Ethernet address: 02:a4:a8:51:fd:0a
epair0b: Ethernet address: 02:a4:a8:51:fd:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
nd6_setmtu0: new link MTU on lo10 (1024) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.380s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_create_iface_plain -> epair0a: Ethernet address: 02:b2:1d:73:a6:0a
epair0b: Ethernet address: 02:b2:1d:73:a6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.362s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_create_iface_plain_retvals -> epair0a: Ethernet address: 02:c0:98:27:e2:0a
epair0b: Ethernet address: 02:c0:98:27:e2:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.431s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_create_vlan_plain -> epair0a: Ethernet address: 02:1e:90:84:d1:0a
epair0b: Ethernet address: 02:1e:90:84:d1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
vlan22: link state changed to DOWN
passed [0.387s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_delete_iface -> epair0a: Ethernet address: 02:03:8e:7b:25:0a
epair0b: Ethernet address: 02:03:8e:7b:25:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.366s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_dump_ifaces_many -> epair0a: Ethernet address: 02:41:29:dc:9a:0a
epair0b: Ethernet address: 02:41:29:dc:9a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.545s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_get_iface_byindex_error -> epair0a: Ethernet address: 02:89:da:46:02:0a
epair0b: Ethernet address: 02:89:da:46:02:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.378s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_get_iface_byname_error -> epair0a: Ethernet address: 02:aa:b5:d2:5a:0a
epair0b: Ethernet address: 02:aa:b5:d2:5a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.371s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_modify_iface_attrs -> epair0a: Ethernet address: 02:6d:e1:13:04:0a
epair0b: Ethernet address: 02:6d:e1:13:04:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
nd6_setmtu0: new link MTU on lo10 (1024) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [3.602s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_add_4[host] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.375s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_add_4[prefix] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [2.263s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_add_6[gu_host] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.366s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_add_6[gu_prefix] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.348s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_address-ipv4_host] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.361s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_address-ipv4_prefix] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.353s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_address-ipv6_gu_host] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.348s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_address-ipv6_gu_prefix] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.357s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_local-ipv4_host] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.350s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_local-ipv4_prefix] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.369s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_local-ipv6_gu_host] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.361s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_local-ipv6_gu_prefix] -> lo0: link state changed to UP
lo1: link state changed to UP
passed [0.339s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlIfaddrList::test_46_filter_family_compat -> epair0a: Ethernet address: 02:f2:ee:ed:21:0a
epair0b: Ethernet address: 02:f2:ee:ed:21:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
vm_run error -1, errno 6
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-6' --destroy
vm_open: testvm-14-amd64-6 could not be opened: No such file or directory
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./run.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins17964234361007216403.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': 'd6fec2dacf80a73dbfd543615350c83fdf810015', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-14/latest_tested/amd64/amd64 -> ../../d6fec2dacf80a73dbfd543615350c83fdf810015/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address