FreeBSD-main-amd64-test - Build #24224 - Failure

From: <jenkins-admin_at_FreeBSD.org>
Date: Sun, 08 Oct 2023 07:16:40 UTC
FreeBSD-main-amd64-test - Build #24224 (04c8bfc1761010c36081cf300fa751548d541122) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24224/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24224/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24224/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

04c8bfc1761010c36081cf300fa751548d541122 by dbaio:
jexec.8: Add examples section



The end of the build log:

[...truncated 4.99 MB...]
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:e6:ab:32:9a:0a
epair1b: Ethernet address: 02:e6:ab:32:9a:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.610s]
sys/netpfil/pf/scrub_compat:no_scrub_v6  ->  epair0a: Ethernet address: 02:03:37:e5:34:0a
epair0b: Ethernet address: 02:03:37:e5:34:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:af:81:2b:05:0a
epair1b: Ethernet address: 02:af:81:2b:05:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.605s]
sys/netpfil/pf/scrub_compat:set_tos_v4  ->  epair0a: Ethernet address: 02:dd:43:6c:a3:0a
epair0b: Ethernet address: 02:dd:43:6c:a3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:25:6e:07:e5:0a
epair1b: Ethernet address: 02:25:6e:07:e5:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.571s]
sys/netpfil/pf/scrub_compat:set_tos_v6  ->  epair0a: Ethernet address: 02:28:f6:85:f1:0a
epair0b: Ethernet address: 02:28:f6:85:f1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:50:78:c9:92:0a
epair1b: Ethernet address: 02:50:78:c9:92:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.533s]
sys/netpfil/pf/scrub_pass:max_mss_v4  ->  epair0a: Ethernet address: 02:38:3e:7c:f3:0a
epair0b: Ethernet address: 02:38:3e:7c:f3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:5c:fb:0f:7d:0a
epair1b: Ethernet address: 02:5c:fb:0f:7d:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.917s]
sys/netpfil/pf/scrub_pass:max_mss_v6  ->  epair0a: Ethernet address: 02:71:94:4d:e7:0a
epair0b: Ethernet address: 02:71:94:4d:e7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:c6:3c:b6:01:0a
epair1b: Ethernet address: 02:c6:3c:b6:01:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.854s]
sys/netpfil/pf/scrub_pass:min_ttl_v4  ->  epair0a: Ethernet address: 02:48:d7:73:69:0a
epair0b: Ethernet address: 02:48:d7:73:69:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:27:fb:d8:8c:0a
epair1b: Ethernet address: 02:27:fb:d8:8c:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.593s]
sys/netpfil/pf/scrub_pass:min_ttl_v6  ->  *** /usr/src/contrib/kyua/utils/process/executor.cpp:779: Invariant check failed: PID 7662 already in all_exec_handles; not properly cleaned up or reused too fast
*** Fatal signal 6 received
*** Log file is /.kyua/logs/kyua.20231008-060356.log
*** Please report this problem to kyua-discuss@googlegroups.com detailing what you were doing before the crash happened; if possible, include the log file mentioned above
epair0a: Ethernet address: 02:82:54:15:f0:0a
epair0b: Ethernet address: 02:82:54:15:f0:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:4d:cb:d8:88:0a
epair1b: Ethernet address: 02:4d:cb:d8:88:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
pid 790 (kyua), jid 0, uid 0: exited on signal 6 (core dumped)
Abort trap (core dumped)
+ rc=134
+ set -e
+ [ 134 -ne 0 ]
+ [ 134 -ne 1 ]
+ exit 134
+ tar cvf /dev/vtbd1 -C /meta .
a .
a ./disable-notyet-tests.sh
a ./run-kyua.sh
a ./disable-zfs-tests.sh
a ./disable-dtrace-tests.sh
a ./auto-shutdown
a ./run.sh
+ [ -f /meta/auto-shutdown ]
+ uname -p
+ shutdown -p now
Shutdown NOW!
shutdown: [pid 7893]
+ startmsg .
+ check_startmsgs
+ [ -n yes ]
+ checkyesno rc_startmsgs
+ eval '_value=$rc_startmsgs'
+ _value=YES
+ debug 'checkyesno: rc_startmsgs is set to YES.'
+ return 0
+ echo .
.
+ _return=0
+ umask 0022
+ [ 0 -ne 0 ]
+ return 0
+ _run_rc_postcmd
+ [ -n '' ]
+ return 0
+ return 0
2023-10-08T07:16:30.187062+00:00 - shutdown 7893 - - power-down by root: 

System shutdown time has arrived
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 4 epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
2 0 0 done
All buffers synced.
lock order reversal:
 1st 0xfffff80003ad15b0 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:2240
 2nd 0xfffff80003ad3e70 fdescfs (fdescfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:3138
lock order devfs -> fdescfs attempted at:
#0 0xffffffff80bc273e at witness_checkorder+0xbbe
#1 0xffffffff80b1c471 at lockmgr_lock_flags+0x181
#2 0xffffffff80c5e393 at _vn_lock+0x53
#3 0xffffffff80c45a2d at vget_finish+0x4d
#4 0xffffffff82610262 at fdesc_root+0x22
#5 0xffffffff80c46acb at vflush+0x4b
#6 0xffffffff82610211 at fdesc_unmount+0x71
#7 0xffffffff80c3b7b5 at dounmount+0x7b5
#8 0xffffffff80c4820a at vfs_unmountall+0x6a
#9 0xffffffff80c1881c at bufshutdown+0x30c
#10 0xffffffff80b4f1c3 at kern_reboot+0x703
#11 0xffffffff80b4ea69 at sys_reboot+0x3a9
#12 0xffffffff8104fd8b at amd64_syscall+0x84b
#13 0xffffffff8102173b at fast_syscall_common+0xf8
pid 504 (devd), jid 0, uid 0: exited on signal 11 (no core dump - other error)
Uptime: 1h12m39s
acpi0: Powering system off
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-24224' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./run.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins13907688148862870156.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '04c8bfc1761010c36081cf300fa751548d541122', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../04c8bfc1761010c36081cf300fa751548d541122/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address