FreeBSD-main-amd64-test - Build #24385 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #24386 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #24384 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Wed, 15 Nov 2023 08:41:12 UTC
FreeBSD-main-amd64-test - Build #24385 (ede077bf2a259c23923d1ab1231dc8c4577e6672) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24385/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24385/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24385/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

b7f7cc25c01aeacaafb86ebcffdeb258b7933b08 by jhb:
libcasper: Neuter false positive -Wuse-after-free warnings from GCC 13

0355ecace82cce8322e5fcdf48f751d253792ce3 by jhb:
libgpio: Fix type mismatch for gpio_pin_[gs]et

ab43851b0c7bd5f21ade72c3cae3d3ee09eb8891 by jhb:
Merge commit 3537338d1ab9 from llvm git (by Nikolas Klauser):

28fc837b70372a1a99c28ef4f74325bce711960a by jhb:
bsd.sys.mk: Disable -Wdangling-reference for GCC 13+

c06962057bedb3f1ed8c3560c1d1147dbf04ba68 by jhb:
makefs cd9660: Unexpand a few TAILQ macros

5fc8ed9313609fbafe505deaea253e6bde5ac165 by jhb:
makefs: Quiet a -Wdangling-pointer warning in cd9660_generate_path_table

cc61bf9eccd46592704f3e7bc189c94ccae8f524 by jhb:
snmp_wlan: Fix a couple of type mismatches in function prototypes

1e65df68403acac2231dda161fd12e62f888a031 by jhb:
ath_hal: Fix a couple of type mismatches in function prototypes

7aa5b2a9e7f5f3cd33e72cb1e95790fe7637f10f by jhb:
ocs: Fix a couple of type mismatches in function prototypes

be909a79a8e2506b49ed81f9bd8115512dd613a4 by jhb:
qlnx: Fix a couple of type mismatches in function declarations

ede077bf2a259c23923d1ab1231dc8c4577e6672 by jhb:
sys: Disable -Walloc-size-larger-than for GCC 9+



The end of the build log:

[...truncated 4.28 MB...]
sys/netlink/test_netlink_message_writer.py:TestNetlinkMessageWriter::test_mbuf_writer_allocation[MCLBYTES-MBUF-WAITOK]  ->  passed  [0.286s]
sys/netlink/test_netlink_message_writer.py:TestNetlinkMessageWriter::test_mbuf_writer_allocation[MHLEN-BUF-NOWAIT]  ->  passed  [0.296s]
sys/netlink/test_netlink_message_writer.py:TestNetlinkMessageWriter::test_mbuf_writer_allocation[MHLEN-BUF-WAITOK]  ->  passed  [0.296s]
sys/netlink/test_netlink_message_writer.py:TestNetlinkMessageWriter::test_mbuf_writer_allocation[MHLEN-MBUF-NOWAIT]  ->  passed  [0.302s]
sys/netlink/test_netlink_message_writer.py:TestNetlinkMessageWriter::test_mbuf_writer_allocation[MHLEN-MBUF-WAITOK]  ->  passed  [0.297s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type[SOCK_DGRAM]  ->  epair0a: Ethernet address: 02:10:0c:19:e1:0a
epair0b: Ethernet address: 02:10:0c:19:e1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.426s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type[SOCK_RAW]  ->  epair0a: Ethernet address: 02:09:56:93:a8:0a
epair0b: Ethernet address: 02:09:56:93:a8:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.418s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type_unsup[SOCK_RDM]  ->  epair0a: Ethernet address: 02:3a:e6:33:ab:0a
epair0b: Ethernet address: 02:3a:e6:33:ab:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.439s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type_unsup[SOCK_SEQPACKET]  ->  epair0a: Ethernet address: 02:47:56:2e:7e:0a
epair0b: Ethernet address: 02:47:56:2e:7e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.395s]
sys/netlink/test_nl_core.py:TestNlCore::test_socket_type_unsup[SOCK_STREAM]  ->  epair0a: Ethernet address: 02:a7:97:ea:a1:0a
epair0b: Ethernet address: 02:a7:97:ea:a1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.432s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_create_iface_attrs  ->  epair0a: Ethernet address: 02:80:3e:55:4d:0a
epair0b: Ethernet address: 02:80:3e:55:4d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
nd6_setmtu0: new link MTU on lo10 (1024) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.409s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_create_iface_plain  ->  epair0a: Ethernet address: 02:23:77:bd:9d:0a
epair0b: Ethernet address: 02:23:77:bd:9d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.458s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_create_iface_plain_retvals  ->  epair0a: Ethernet address: 02:d1:27:f8:3d:0a
epair0b: Ethernet address: 02:d1:27:f8:3d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.417s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_create_vlan_plain  ->  epair0a: Ethernet address: 02:80:36:7e:a5:0a
epair0b: Ethernet address: 02:80:36:7e:a5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
vlan22: link state changed to DOWN
passed  [0.456s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_delete_iface  ->  epair0a: Ethernet address: 02:ee:86:0c:6c:0a
epair0b: Ethernet address: 02:ee:86:0c:6c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.434s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_dump_ifaces_many  ->  epair0a: Ethernet address: 02:48:cf:8a:c1:0a
epair0b: Ethernet address: 02:48:cf:8a:c1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.612s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_get_iface_byindex_error  ->  epair0a: Ethernet address: 02:10:70:f3:bd:0a
epair0b: Ethernet address: 02:10:70:f3:bd:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.455s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_get_iface_byname_error  ->  epair0a: Ethernet address: 02:b5:06:30:e0:0a
epair0b: Ethernet address: 02:b5:06:30:e0:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.408s]
sys/netlink/test_rtnl_iface.py:TestRtNlIface::test_modify_iface_attrs  ->  epair0a: Ethernet address: 02:99:8e:95:ac:0a
epair0b: Ethernet address: 02:99:8e:95:ac:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
nd6_setmtu0: new link MTU on lo10 (1024) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.428s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_add_4[host]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.411s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_add_4[prefix]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.416s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_add_6[gu_host]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.408s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_add_6[gu_prefix]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.425s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_address-ipv4_host]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.427s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_address-ipv4_prefix]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.439s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_address-ipv6_gu_host]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.436s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_address-ipv6_gu_prefix]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.422s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_local-ipv4_host]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.409s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_local-ipv4_prefix]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.448s]
sys/netlink/test_rtnl_ifaddr.py:TestRtNlAddIfaddrLo::test_del[ifa_local-ipv6_gu_host]  ->  lo0: link state changed to UP
lo1: link state changed to UP
passed  [0.411s]

Fatal trap 9: general protection fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer	= 0x20:0xffffffff80b095ed
stack pointer	        = 0x28:0xfffffe00a7c2ee70
frame pointer	        = 0x28:0xfffffe00a7c2eef0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (swi1:)
rdi: deadc0dedeadc0de rsi: 0000000000000000 rdx: ffffffff81a1d478
rcx: 0000000000000000  r8: 0000000000000000  r9: 0000000000010000
rax: deadc0dedeadc0de rbx: fffff80191709f60 rbp: fffffe00a7c2eef0
r10: 0000000000000001 r11: 0000000000010000 r12: fffff801a7932100
r13: 0000000000000000 r14: fffff801470b1740 r15: fffff801a7932158
trap number		= 9
panic: general protection fault
cpuid = 0
time = 1700037671
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00a7c2ebb0
vpanic() at vpanic+0x132/frame 0xfffffe00a7c2ece0
panic() at panic+0x43/frame 0xfffffe00a7c2ed40
trap_fatal() at trap_fatal+0x40c/frame 0xfffffe00a7c2eda0
calltrap() at calltrap+0x8/frame 0xfffffe00a7c2eda0
--- trap 0x9, rip = 0xffffffff80b095ed, rsp = 0xfffffe00a7c2ee70, rbp = 0xfffffe00a7c2eef0 ---
ithread_loop() at ithread_loop+0x39d/frame 0xfffffe00a7c2eef0
fork_exit() at fork_exit+0x82/frame 0xfffffe00a7c2ef30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00a7c2ef30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 120238 ]
Stopped at      kdb_enter+0x32: movq    $0,0xe2add3(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0x9f0240
curthread    = 0xfffff801470b1740: pid 12 tid 120238 critnest 1 "swi1:"
curpcb       = 0xfffff801470b1c60
fpcurthread  = none
idlethread   = 0xfffff800038c0740: tid 100003 "idle: cpu0"
self         = 0xffffffff82210000
curpmap      = 0xffffffff8196d270
tssp         = 0xffffffff82210384
rsp0         = 0xfffffe00a7c2f000
kcr3         = 0x8000000002169004
ucr3         = 0xffffffffffffffff
scr3         = 0x1be2abd47
gs32p        = 0xffffffff82210404
ldt          = 0xffffffff82210444
tss          = 0xffffffff82210434
curvnet      = 0
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 41m51s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-24385' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./run.sh
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins18038417422731447790.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'ede077bf2a259c23923d1ab1231dc8c4577e6672', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../ede077bf2a259c23923d1ab1231dc8c4577e6672/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address