FreeBSD-main-amd64-test - Build #23242 - Still Failing

From: <jenkins-admin_at_FreeBSD.org>
Date: Tue, 28 Mar 2023 07:33:06 UTC
FreeBSD-main-amd64-test - Build #23242 (f858eb916fd263f696c290798d4a260b6e55af60) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/23242/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/23242/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/23242/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

01194da28a2123a2aa09808319f152fa115f60f1 by kp:
pfsync: hold b_mtx for callout_stop(pd_tmo)

27b23cdec9d1255e014ea0decac42a5be8d00735 by kp:
pf: remove pd_refs from pfsync

ccff2078af42dc066e1c38d25fcb83d960c3c22b by kp:
carp: fix source MAC

78e6c3aacc7fb9181a0fd77dc0bdf4b29e2f1d3f by glebius:
tcp: update error counter when dropping a packet due to bad source

f858eb916fd263f696c290798d4a260b6e55af60 by rscheff:
tcp: send SACK rescue retransmission also mid-stream



The end of the build log:

[...truncated 5.21 MB...]
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
vmnet0: Ethernet address: 58:9c:fc:10:ff:f0
passed  [10.046s]
sys/net/if_epair:params  ->  epair0a: Ethernet address: 02:44:74:e5:07:0a
epair0b: Ethernet address: 02:44:74:e5:07:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.027s]
sys/net/if_gif:basic  ->  epair0a: Ethernet address: 02:8b:95:b0:41:0a
epair0b: Ethernet address: 02:8b:95:b0:41:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
gif0: link state changed to UP
gif0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.222s]
sys/net/if_lagg_test:create  ->  tap0: Ethernet address: 58:9c:fc:00:7a:26
tap1: Ethernet address: 58:9c:fc:10:5f:50
lagg0: link state changed to DOWN
lock order reversal:
 1st 0xffffffff81f96d70 in_control (in_control, sx) @ /usr/src/sys/netinet/in.c:365
 2nd 0xfffff802090b2a28 if_lagg sx (if_lagg sx, sx) @ /usr/src/sys/net/if_lagg.c:1275
lock order in_control -> if_lagg sx attempted at:
#0 0xffffffff80c60ba3 at witness_checkorder+0xbb3
#1 0xffffffff80bfa073 at _sx_xlock+0x63
#2 0xffffffff828fdb5e at lagg_init+0x2e
#3 0xffffffff80d257bf at ether_ioctl+0x1bf
#4 0xffffffff80db2bc0 at in_control+0x9c0
#5 0xffffffff80d1e862 at ifioctl+0x972
#6 0xffffffff80c6681e at kern_ioctl+0x1fe
#7 0xffffffff80c665b4 at sys_ioctl+0x154
#8 0xffffffff810e4aa2 at amd64_syscall+0x6e2
#9 0xffffffff810b7d2b at fast_syscall_common+0xf8
lock order reversal:
 1st 0xffffffff81f96df0 in_multi_sx (in_multi_sx, sx) @ /usr/src/sys/netinet/in_mcast.c:1201
 2nd 0xfffff802090b2a28 if_lagg sx (if_lagg sx, sx) @ /usr/src/sys/net/if_lagg.c:1688
lock order in_multi_sx -> if_lagg sx attempted at:
#0 0xffffffff80c60ba3 at witness_checkorder+0xbb3
#1 0xffffffff80bfa073 at _sx_xlock+0x63
#2 0xffffffff828fdd74 at lagg_ioctl+0xd4
#3 0xffffffff80d1db0c at if_addmulti+0x2bc
#4 0xffffffff80db88ca at in_joingroup_locked+0x27a
#5 0xffffffff80db8622 at in_joingroup+0x42
#6 0xffffffff80db2c09 at in_control+0xa09
#7 0xffffffff80d1e862 at ifioctl+0x972
#8 0xffffffff80c6681e at kern_ioctl+0x1fe
#9 0xffffffff80c665b4 at sys_ioctl+0x154
#10 0xffffffff810e4aa2 at amd64_syscall+0x6e2
#11 0xffffffff810b7d2b at fast_syscall_common+0xf8
passed  [0.131s]
sys/net/if_lagg_test:create_destroy_stress  ->  skipped: Skipping this test because it easily panics the machine  [0.019s]
sys/net/if_lagg_test:lacp_linkstate_destroy_stress  ->  skipped: https://bugs.freebsd.org/244168  [0.021s]
sys/net/if_lagg_test:set_ether  ->  tap0: Ethernet address: 58:9c:fc:00:7a:26
tap1: Ethernet address: 58:9c:fc:10:5f:50
lagg0: link state changed to DOWN
passed  [0.071s]
sys/net/if_lagg_test:status_stress  ->  skipped: Skipping this test because it panics the machine fairly often  [0.025s]
sys/net/if_lagg_test:up_destroy_stress  ->  skipped: Skipping this test because it panics the machine fairly often  [0.022s]
sys/net/if_lagg_test:updown  ->  tap0: Ethernet address: 58:9c:fc:00:7a:26
tap1: Ethernet address: 58:9c:fc:10:5f:50
lagg0: link state changed to DOWN
expected_failure: PR 226144 Upping a lagg interrface should automatically up its children: atf-check failed; see the output of the test for details  [0.071s]
sys/net/if_lagg_test:witness  ->  skipped: https://bugs.freebsd.org/244163 and https://bugs.freebsd.org/251726  [0.019s]
sys/net/if_stf:6rd  ->  epair0a: Ethernet address: 02:d1:ee:1c:a4:0a
epair0b: Ethernet address: 02:d1:ee:1c:a4:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
gif0: link state changed to UP


Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x0
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff80d1b862
stack pointer	        = 0x28:0xfffffe010f8b3b80
frame pointer	        = 0x28:0xfffffe010f8b3bb0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 0 (netlink_socket (PID)
rdi: ffffffff81ece500 rsi:                0 rdx:               10
rcx:               1c  r8:                0  r9: fffff80006f98400
rax: fffff800039495a0 rbx: fffff80003949500 rbp: fffffe010f8b3bb0
r10:                0 r11:            10000 r12:               12
r13: fffff80006f98404 r14: fffff801baa2c800 r15: fffff80003949500
trap number		= 12
panic: page fault
cpuid = 0
time = 1679988785
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe010f8b3940
vpanic() at vpanic+0x152/frame 0xfffffe010f8b3990
panic() at panic+0x43/frame 0xfffffe010f8b39f0
trap_fatal() at trap_fatal+0x409/frame 0xfffffe010f8b3a50
trap_pfault() at trap_pfault+0xab/frame 0xfffffe010f8b3ab0
calltrap() at calltrap+0x8/frame 0xfffffe010f8b3ab0
--- trap 0xc, rip = 0xffffffff80d1b862, rsp = 0xfffffe010f8b3b80, rbp = 0xfffffe010f8b3bb0 ---
ifaof_ifpforaddr() at ifaof_ifpforaddr+0x102/frame 0xfffffe010f8b3bb0
finalize_nhop() at finalize_nhop+0x74/frame 0xfffffe010f8b3be0
rtnl_handle_newroute() at rtnl_handle_newroute+0x41a/frame 0xfffffe010f8b3cb0
rtnl_handle_message() at rtnl_handle_message+0x134/frame 0xfffffe010f8b3d10
nl_taskqueue_handler() at nl_taskqueue_handler+0x719/frame 0xfffffe010f8b3e40
taskqueue_run_locked() at taskqueue_run_locked+0xaa/frame 0xfffffe010f8b3ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xc2/frame 0xfffffe010f8b3ef0
fork_exit() at fork_exit+0x80/frame 0xfffffe010f8b3f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe010f8b3f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 118645 ]
Stopped at      kdb_enter+0x32: movq    $0,0x12931d3(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0x9c0540
curthread    = 0xfffffe0118338720: pid 0 tid 118645 critnest 1 "netlink_socket (PID"
curpcb       = 0xfffffe0118338c40
fpcurthread  = none
idlethread   = 0xfffffe00112243a0: tid 100003 "idle: cpu0"
self         = 0xffffffff82610000
curpmap      = 0xffffffff81e846f0
tssp         = 0xffffffff82610384
rsp0         = 0xfffffe010f8b4000
kcr3         = 0x8000000002576004
ucr3         = 0xffffffffffffffff
scr3         = 0x1cb90bdb4
gs32p        = 0xffffffff82610404
ldt          = 0xffffffff82610444
tss          = 0xffffffff82610434
curvnet      = 0xfffff801ba641b80
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 1h15m11s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-23242' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./run.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins320755172201643543.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'f858eb916fd263f696c290798d4a260b6e55af60', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../f858eb916fd263f696c290798d4a260b6e55af60/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address