FreeBSD-main-amd64-test - Build #22788 - Failure
Date: Thu, 12 Jan 2023 20:48:53 UTC
FreeBSD-main-amd64-test - Build #22788 (5e5baba880a2cf070872ab538b6a3a105324b302) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22788/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22788/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22788/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
a872c37054172f3f7a03aef263ca5886a749771f by brooks:
xdr: store chars consistently
aac389a347733b5fa2bf4df3dcb2d39b2f739d61 by brooks:
makefs: handle mtree contents= in zfs
b78d5b42414518dd85b2ebf2f15ba8a742ead399 by brooks:
makefs: handle mtree link= for ZFS
794154149f95d0cbc11aade166f9da919747e397 by brooks:
makefs: don't needlessly require directories to exist
5e5baba880a2cf070872ab538b6a3a105324b302 by brooks:
Revert "makefs: don't needlessly require directories to exist"
The end of the build log:
[...truncated 3.92 MB...]
epair24a: link state changed to UP
epair24b: link state changed to UP
lo0: link state changed to UP
epair24b: link state changed to DOWN
epair24a: link state changed to DOWN
passed [0.480s]
sys/netinet6/test_ip6_output.py:TestIP6OutputLoopback::test_output6_self_udp[lo-no_sav] -> epair24a: Ethernet address: 02:fa:b5:a4:41:0a
epair24b: Ethernet address: 02:fa:b5:a4:41:0b
epair24a: link state changed to UP
epair24b: link state changed to UP
lo0: link state changed to UP
epair24b: link state changed to DOWN
epair24a: link state changed to DOWN
passed [0.497s]
sys/netinet6/test_ip6_output.py:TestIP6OutputLoopback::test_output6_self_udp[lo-sav] -> epair24a: Ethernet address: 02:8f:3b:fd:33:0a
epair24b: Ethernet address: 02:8f:3b:fd:33:0b
epair24a: link state changed to UP
epair24b: link state changed to UP
lo0: link state changed to UP
epair24b: link state changed to DOWN
epair24a: link state changed to DOWN
passed [0.473s]
sys/netinet6/test_ip6_output.py:TestIP6OutputMulticast::test_output6_multicast[ff02] -> epair24a: Ethernet address: 02:af:5b:a0:be:0a
epair24b: Ethernet address: 02:af:5b:a0:be:0b
epair24a: link state changed to UP
epair24b: link state changed to UP
epair25a: Ethernet address: 02:54:bb:89:61:0a
epair25b: Ethernet address: 02:54:bb:89:61:0b
epair25a: link state changed to UP
epair25b: link state changed to UP
epair26a: Ethernet address: 02:9b:44:86:3d:0a
epair26b: Ethernet address: 02:9b:44:86:3d:0b
epair26a: link state changed to UP
epair26b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [0.760s]
sys/netinet6/test_ip6_output.py:TestIP6OutputMulticast::test_output6_multicast[ff05] -> epair27a: Ethernet address: 02:09:1d:7f:c2:0a
epair27b: Ethernet address: 02:09:1d:7f:c2:0b
epair27a: link state changed to UP
epair27b: link state changed to UP
epair28a: Ethernet address: 02:f6:ba:d8:e7:0a
epair28b: Ethernet address: 02:f6:ba:d8:e7:0b
epair28a: link state changed to UP
epair28b: link state changed to UP
epair29a: Ethernet address: 02:40:ab:f1:f5:0a
epair29b: Ethernet address: 02:40:ab:f1:f5:0b
epair29a: link state changed to UP
epair29b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [0.780s]
sys/netinet6/test_ip6_output.py:TestIP6OutputMulticast::test_output6_multicast[ff08] -> epair30a: Ethernet address: 02:6e:f7:2d:b4:0a
epair30b: Ethernet address: 02:6e:f7:2d:b4:0b
epair30a: link state changed to UP
epair30b: link state changed to UP
epair31a: Ethernet address: 02:7e:e0:ef:1b:0a
epair31b: Ethernet address: 02:7e:e0:ef:1b:0b
epair31a: link state changed to UP
epair31b: link state changed to UP
epair32a: Ethernet address: 02:61:cd:cb:fc:0a
epair32b: Ethernet address: 02:61:cd:cb:fc:0b
epair32a: link state changed to UP
epair32b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [0.827s]
sys/netinet6/test_ip6_output.py:TestIP6OutputMulticast::test_output6_multicast[ff0e] -> epair33a: Ethernet address: 02:26:90:87:20:0a
epair33b: Ethernet address: 02:26:90:87:20:0b
epair33a: link state changed to UP
epair33b: link state changed to UP
epair34a: Ethernet address: 02:d1:b0:84:26:0a
epair34b: Ethernet address: 02:d1:b0:84:26:0b
epair34a: link state changed to UP
epair34b: link state changed to UP
epair35a: Ethernet address: 02:90:bc:12:d2:0a
epair35b: Ethernet address: 02:90:bc:12:d2:0b
epair35a: link state changed to UP
epair35b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [1.022s]
sys/netinet6/test_ip6_output.py:TestIP6OutputNhopLL::test_output6_nhop_linklocal -> epair36a: Ethernet address: 02:9e:bf:c8:15:0a
epair36b: Ethernet address: 02:9e:bf:c8:15:0b
epair36a: link state changed to UP
epair36b: link state changed to UP
epair37a: Ethernet address: 02:8d:61:a4:37:0a
epair37b: Ethernet address: 02:8d:61:a4:37:0b
epair37a: link state changed to UP
epair37b: link state changed to UP
epair38a: Ethernet address: 02:40:3e:e8:f2:0a
epair38b: Ethernet address: 02:40:3e:e8:f2:0b
epair38a: link state changed to UP
epair38b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [0.788s]
sys/netinet6/test_ip6_output.py:TestIP6OutputScope::test_output6_linklocal_scope[gu_to_ll] -> epair39a: Ethernet address: 02:91:a6:37:e2:0a
epair39b: Ethernet address: 02:91:a6:37:e2:0b
epair39a: link state changed to UP
epair39b: link state changed to UP
epair40a: Ethernet address: 02:9a:2c:a9:49:0a
epair40b: Ethernet address: 02:9a:2c:a9:49:0b
epair40a: link state changed to UP
epair40b: link state changed to UP
epair41a: Ethernet address: 02:c1:8f:7e:df:0a
epair41b: Ethernet address: 02:c1:8f:7e:df:0b
epair41a: link state changed to UP
epair41b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [0.741s]
sys/netinet6/test_ip6_output.py:TestIP6OutputScope::test_output6_linklocal_scope[ll_differentif1] -> epair42a: Ethernet address: 02:b0:07:3d:95:0a
epair42b: Ethernet address: 02:b0:07:3d:95:0b
epair42a: link state changed to UP
epair42b: link state changed to UP
epair43a: Ethernet address: 02:23:79:3c:4a:0a
epair43b: Ethernet address: 02:23:79:3c:4a:0b
epair43a: link state changed to UP
epair43b: link state changed to UP
epair44a: Ethernet address: 02:6f:3b:da:6e:0a
epair44b: Ethernet address: 02:6f:3b:da:6e:0b
epair44a: link state changed to UP
epair44b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [0.858s]
sys/netinet6/test_ip6_output.py:TestIP6OutputScope::test_output6_linklocal_scope[ll_differentif2] -> epair45a: Ethernet address: 02:31:63:42:a8:0a
epair45b: Ethernet address: 02:31:63:42:a8:0b
epair45a: link state changed to UP
epair45b: link state changed to UP
epair46a: Ethernet address: 02:85:01:6c:d1:0a
epair46b: Ethernet address: 02:85:01:6c:d1:0b
epair46a: link state changed to UP
epair46b: link state changed to UP
epair47a: Ethernet address: 02:4b:c8:1f:d2:0a
epair47b: Ethernet address: 02:4b:c8:1f:d2:0b
epair47a: link state changed to UP
epair47b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [0.852s]
sys/netinet6/test_ip6_output.py:TestIP6OutputScope::test_output6_linklocal_scope[same] -> epair48a: Ethernet address: 02:72:1d:ff:6d:0a
epair48b: Ethernet address: 02:72:1d:ff:6d:0b
epair48a: link state changed to UP
epair48b: link state changed to UP
epair49a: Ethernet address: 02:79:db:74:c7:0a
epair49b: Ethernet address: 02:79:db:74:c7:0b
epair49a: link state changed to UP
epair49b: link state changed to UP
epair50a: Ethernet address: 02:a3:6a:4c:c4:0a
epair50b: Ethernet address: 02:a3:6a:4c:c4:0b
epair50a: link state changed to UP
epair50b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
passed [0.955s]
sys/netinet6/frag6/frag6_01:frag6_01 -> skipped: Sending IPv6 Jumbograms needs 1 kernel changes and BPF fixes [0.028s]
sys/netinet6/frag6/frag6_02:frag6_02 -> epair51a: Ethernet address: 02:5a:98:4f:02:0a
epair51b: Ethernet address: 02:5a:98:4f:02:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
epair51a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair51b: link state changed to DOWN
epair51a: link state changed to DOWN
passed [15.444s]
sys/netinet6/frag6/frag6_03:frag6_03 -> epair51a: Ethernet address: 02:fa:3e:ea:3e:0a
epair51b: Ethernet address: 02:fa:3e:ea:3e:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
panic: Assertion curthread->td_no_sleeping > 0 failed at /usr/src/sys/kern/kern_intr.c:1222
cpuid = 1
time = 1673556531
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00d309fdb0
vpanic() at vpanic+0x151/frame 0xfffffe00d309fe00
panic() at panic+0x43/frame 0xfffffe00d309fe60
ithread_loop() at ithread_loop+0x494/frame 0xfffffe00d309fef0
fork_exit() at fork_exit+0x80/frame 0xfffffe00d309ff30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00d309ff30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 12 tid 101639 ]
Stopped at kdb_enter+0x32: movq $0,0x129dc63(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 1
dynamic pcpu = 0xfffffe008f5897c0
curthread = 0xfffffe00d2e68020: pid 12 tid 101639 critnest 1 "swi1:"
curpcb = 0xfffffe00d2e68540
fpcurthread = none
idlethread = 0xfffffe0011223c80: tid 100004 "idle: cpu1"
self = 0xffffffff82611000
curpmap = 0xffffffff81e8f230
tssp = 0xffffffff82611384
rsp0 = 0xfffffe00d30a0000
kcr3 = 0x800000000256d002
ucr3 = 0xffffffffffffffff
scr3 = 0x189e1c07
gs32p = 0xffffffff82611404
ldt = 0xffffffff82611444
tss = 0xffffffff82611434
curvnet = 0
spin locks held:
db:0:kdb.enter.panic> reset
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-22788' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins5340431978204394172.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '5e5baba880a2cf070872ab538b6a3a105324b302', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../5e5baba880a2cf070872ab538b6a3a105324b302/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address