FreeBSD-main-amd64-test - Build #22945 - Still Failing
Date: Wed, 08 Feb 2023 20:33:07 UTC
FreeBSD-main-amd64-test - Build #22945 (5fff09660e06a66bed6482da9c70df328e16bbb6) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22945/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22945/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22945/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
30d7d06f4f373e6934f73ca77914cfe134595bff by kevans:
Import lua 5.4.3
755d9301ca89f02956fd17858b9d4d821ab5c972 by kevans:
Import Lua 5.4.4
87d405eab91169e0b650a7dd2e5097c0b990fac5 by dougm:
iommu_gas: initialize start_gap as first node
5fff09660e06a66bed6482da9c70df328e16bbb6 by gordon:
geli: split the initalization of HMAC
The end of the build log:
[...truncated 4.25 MB...]
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [2.048s]
sys/netpfil/pf/ether:tag -> epair0a: Ethernet address: 02:e0:56:bd:8e:0a
epair0b: Ethernet address: 02:e0:56:bd:8e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [11.335s]
sys/netpfil/pf/forward:v4 -> epair0a: Ethernet address: 02:38:1e:c4:21:0a
epair0b: Ethernet address: 02:38:1e:c4:21:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:dc:16:b4:eb:0a
epair1b: Ethernet address: 02:dc:16:b4:eb:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed [11.128s]
sys/netpfil/pf/forward:v6 -> skipped: https://bugs.freebsd.org/260460 [0.034s]
sys/netpfil/pf/fragmentation:mtu_diff -> epair0a: Ethernet address: 02:ee:58:f1:ca:0a
epair0b: Ethernet address: 02:ee:58:f1:ca:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:b3:33:87:84:0a
epair1b: Ethernet address: 02:b3:33:87:84:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [0.309s]
sys/netpfil/pf/fragmentation:overindex -> epair0a: Ethernet address: 02:36:a6:76:8d:0a
epair0b: Ethernet address: 02:36:a6:76:8d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [6.310s]
sys/netpfil/pf/fragmentation:overlimit -> epair0a: Ethernet address: 02:5c:ed:5e:f7:0a
epair0b: Ethernet address: 02:5c:ed:5e:f7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [11.335s]
sys/netpfil/pf/fragmentation:overreplace -> epair0a: Ethernet address: 02:aa:e8:97:04:0a
epair0b: Ethernet address: 02:aa:e8:97:04:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [4.213s]
sys/netpfil/pf/fragmentation:reassemble -> epair0a: Ethernet address: 02:52:a6:1f:65:0a
epair0b: Ethernet address: 02:52:a6:1f:65:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [22.429s]
sys/netpfil/pf/fragmentation:too_many_fragments -> epair0a: Ethernet address: 02:7e:0f:90:e5:0a
epair0b: Ethernet address: 02:7e:0f:90:e5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
nd6_setmtu0: new link MTU on epair0b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair0a (200) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [11.228s]
sys/netpfil/pf/fragmentation:v6 -> epair0a: Ethernet address: 02:83:25:5b:0f:0a
epair0b: Ethernet address: 02:83:25:5b:0f:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:c8:6f:17:e0:0a
epair1b: Ethernet address: 02:c8:6f:17:e0:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
Fatal trap 9: general protection fault while in kernel mode
cpuid = 1; apic id = 01
instruction pointer = 0x20:0xffffffff80ba7bae
stack pointer = 0x0:0xfffffe00d62a0e70
frame pointer = 0x0:0xfffffe00d62a0ef0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1:)
rdi: deadc0dedeadc0de rsi: ffffffff81f3b6e0 rdx: ffffffff812b761a
rcx: 0 r8: 246 r9: 10000
rax: deadc0dedeadc0de rbx: fffff8009fe45558 rbp: fffffe00d62a0ef0
r10: 1 r11: 10000 r12: fffff8009fe45500
r13: 0 r14: fffff80003894840 r15: fffffe00d8c66720
trap number = 9
panic: general protection fault
cpuid = 1
time = 1675888387
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00d62a0c90
vpanic() at vpanic+0x151/frame 0xfffffe00d62a0ce0
panic() at panic+0x43/frame 0xfffffe00d62a0d40
trap_fatal() at trap_fatal+0x409/frame 0xfffffe00d62a0da0
calltrap() at calltrap+0x8/frame 0xfffffe00d62a0da0
--- trap 0x9, rip = 0xffffffff80ba7bae, rsp = 0xfffffe00d62a0e70, rbp = 0xfffffe00d62a0ef0 ---
ithread_loop() at ithread_loop+0x3be/frame 0xfffffe00d62a0ef0
fork_exit() at fork_exit+0x80/frame 0xfffffe00d62a0f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00d62a0f30
--- trap 0xc, rip = 0x826112a8a, rsp = 0x871598f48, rbp = 0x871598f60 ---
KDB: enter: panic
[ thread pid 12 tid 103263 ]
Stopped at kdb_enter+0x32: movq $0,0x12a0ea3(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 1
dynamic pcpu = 0xfffffe008f587740
curthread = 0xfffffe00d8c66720: pid 12 tid 103263 critnest 1 "swi1:"
curpcb = 0xfffffe00d8c66c40
fpcurthread = none
idlethread = 0xfffffe0011223c80: tid 100004 "idle: cpu1"
self = 0xffffffff82611000
curpmap = 0xffffffff81e912b0
tssp = 0xffffffff82611384
rsp0 = 0xfffffe00d62a1000
kcr3 = 0x8000000002574003
ucr3 = 0xffffffffffffffff
scr3 = 0x9f1f3e01
gs32p = 0xffffffff82611404
ldt = 0xffffffff82611444
tss = 0xffffffff82611434
curvnet = 0
spin locks held:
db:0:kdb.enter.panic> reset
Uptime: 59m21s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-22945' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-zfs-tests.sh
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./run.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins6373995981632474660.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '5fff09660e06a66bed6482da9c70df328e16bbb6', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../5fff09660e06a66bed6482da9c70df328e16bbb6/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address