FreeBSD-main-amd64-test - Build #20807 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #20808 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #20806 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Tue, 08 Mar 2022 13:30:11 UTC
FreeBSD-main-amd64-test - Build #20807 (a20773c810814dd130ca1f0fbf08d27fea465555) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20807/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20807/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20807/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

8e03a750865b2920d8d1d8cf89210dc2183ea802 by lwhsu:
Skip sys.geom.class.multipath.failloop.failloop if dtrace fails to run

221c6f86f0e76f890b3c8c5bc5bac6dba943bd60 by pho:
stress2: Exclude a few test.

fa99b3cf871a1d9889740327bf8ca7927db4caa7 by pho:
stress2: Fix typo in exclude names

a20773c810814dd130ca1f0fbf08d27fea465555 by kp:
pfctl: support recursive printing of nat rules



The end of the build log:

[...truncated 4.22 MB...]
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [6.700s]
sys/netpfil/common/tos:pf_tos  ->  epair0a: Ethernet address: 02:c7:aa:60:7b:0a
epair0b: Ethernet address: 02:c7:aa:60:7b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:07:cc:34:c5:0a
epair1b: Ethernet address: 02:07:cc:34:c5:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [6.802s]
sys/netpfil/pf/altq:cbq_vlan  ->  skipped: Test requires ALTQ  [0.029s]
sys/netpfil/pf/altq:codel_bridge  ->  skipped: Test requires ALTQ  [0.028s]
sys/netpfil/pf/altq:hfsc  ->  skipped: Test requires ALTQ  [0.028s]
sys/netpfil/pf/altq:match  ->  skipped: Test requires ALTQ  [0.028s]
sys/netpfil/pf/altq:prioritise  ->  skipped: Test requires ALTQ  [0.026s]
sys/netpfil/pf/anchor:pr183198  ->  epair0a: Ethernet address: 02:ef:e8:f1:79:0a
epair0b: Ethernet address: 02:ef:e8:f1:79:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.132s]
sys/netpfil/pf/checksum:unaligned  ->  epair0a: Ethernet address: 02:12:26:75:8b:0a
epair0b: Ethernet address: 02:12:26:75:8b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:e8:76:86:44:0a
epair1b: Ethernet address: 02:e8:76:86:44:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.977s]
sys/netpfil/pf/dup:dup_to  ->  epair0a: Ethernet address: 02:af:93:24:e1:0a
epair0b: Ethernet address: 02:af:93:24:e1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:77:98:8f:9d:0a
epair1b: Ethernet address: 02:77:98:8f:9d:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:6b:37:46:b3:0a
epair2b: Ethernet address: 02:6b:37:46:b3:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair1a: promiscuous mode enabled
epair2a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair2a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed  [4.220s]
sys/netpfil/pf/ether:anchor  ->  epair0a: Ethernet address: 02:60:82:6e:0d:0a
epair0b: Ethernet address: 02:60:82:6e:0d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: Failed to set PF rules in alcatraz  [0.183s]
sys/netpfil/pf/ether:captive  ->  epair0a: Ethernet address: 02:40:02:f3:e5:0a
epair0b: Ethernet address: 02:40:02:f3:e5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:12:83:d9:13:0a
epair1b: Ethernet address: 02:12:83:d9:13:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.313s]
sys/netpfil/pf/ether:captive_long  ->  epair0a: Ethernet address: 02:f4:fb:3e:66:0a
epair0b: Ethernet address: 02:f4:fb:3e:66:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:cc:4b:ac:05:0a
epair1b: Ethernet address: 02:cc:4b:ac:05:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.316s]
sys/netpfil/pf/ether:direction  ->  epair0a: Ethernet address: 02:e9:98:45:16:0a
epair0b: Ethernet address: 02:e9:98:45:16:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [3.339s]
sys/netpfil/pf/ether:dummynet  ->  epair0a: Ethernet address: 02:6a:02:ef:bf:0a
epair0b: Ethernet address: 02:6a:02:ef:bf:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [24.838s]
sys/netpfil/pf/ether:mac  ->  epair0a: Ethernet address: 02:99:b4:89:f6:0a
epair0b: Ethernet address: 02:99:b4:89:f6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [8.617s]
sys/netpfil/pf/ether:proto  ->  epair0a: Ethernet address: 02:74:4e:5a:43:0a
epair0b: Ethernet address: 02:74:4e:5a:43:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.200s]
sys/netpfil/pf/forward:v4  ->  epair0a: Ethernet address: 02:f1:35:3f:5d:0a
epair0b: Ethernet address: 02:f1:35:3f:5d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:4d:d3:2b:85:0a
epair1b: Ethernet address: 02:4d:d3:2b:85:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
Memory modified after free 0xfffff801b6dd0900(248) val=deadc0dd @ 0xfffff801b6dd09c0
panic: Most recently used by pf_ifnet

cpuid = 0
time = 1646746210
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe0084f43920
vpanic() at vpanic+0x17f/frame 0xfffffe0084f43970
panic() at panic+0x43/frame 0xfffffe0084f439d0
mtrash_ctor() at mtrash_ctor+0x81/frame 0xfffffe0084f439f0
item_ctor() at item_ctor+0x2cb/frame 0xfffffe0084f43a40
malloc() at malloc+0x86/frame 0xfffffe0084f43a80
pf_kkif_create() at pf_kkif_create+0x23/frame 0xfffffe0084f43aa0
pfi_initialize_vnet() at pfi_initialize_vnet+0x11f/frame 0xfffffe0084f43af0
vnet_pf_init() at vnet_pf_init+0x178/frame 0xfffffe0084f43b20
vnet_alloc() at vnet_alloc+0x144/frame 0xfffffe0084f43b50
kern_jail_set() at kern_jail_set+0x177c/frame 0xfffffe0084f43dd0
sys_jail_set() at sys_jail_set+0x40/frame 0xfffffe0084f43e00
amd64_syscall() at amd64_syscall+0x6a6/frame 0xfffffe0084f43f30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe0084f43f30
--- syscall (507, FreeBSD ELF64, sys_jail_set), rip = 0xec9a6a49d6a, rsp = 0xec9a28045c8, rbp = 0xec9a28046b0 ---
KDB: enter: panic
[ thread pid 96432 tid 100093 ]
Stopped at      kdb_enter+0x37: movq    $0,0x12800de(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        = 0
dynamic pcpu = 0x7c3400
curthread    = 0xfffffe0098bd1e40: pid 96432 tid 100093 critnest 1 "jail"
curpcb       = 0xfffffe0098bd2350
fpcurthread  = 0xfffffe0098bd1e40: pid 96432 "jail"
idlethread   = 0xfffffe001122f3a0: tid 100003 "idle: cpu0"
self         = 0xffffffff82410000
curpmap      = 0xfffffe00cd095b20
tssp         = 0xffffffff82410384
rsp0         = 0xfffffe0084f44000
kcr3         = 0x8000000160b1b475
ucr3         = 0x80000001b6ae3c75
scr3         = 0x1b6ae3c75
gs32p        = 0xffffffff82410404
ldt          = 0xffffffff82410444
tss          = 0xffffffff82410434
curvnet      = 0xfffff80160054300
spin locks held:
db:0:kdb.enter.panic>  reset
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-20807' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./run.sh
x ./auto-shutdown
x ./disable-notyet-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins4146522954652096858.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'a20773c810814dd130ca1f0fbf08d27fea465555', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../a20773c810814dd130ca1f0fbf08d27fea465555/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address