FreeBSD-main-amd64-test - Build #21590 - Failure
Date: Sun, 10 Jul 2022 11:57:59 UTC
FreeBSD-main-amd64-test - Build #21590 (da4e1e319c6cdaa1c6b3b44d8523e660a5e77e10) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21590/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21590/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21590/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
da4e1e319c6cdaa1c6b3b44d8523e660a5e77e10 by tsoome:
Add the Arm CoreLink CMN-600 Coherent Mesh Network Controller PMU driver
The end of the build log:
[...truncated 4.59 MB...]
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
vmnet0: Ethernet address: 58:9c:fc:10:8f:55
passed [10.039s]
sys/net/if_epair:params -> epair75a: Ethernet address: 02:35:9f:ef:1d:0a
epair75b: Ethernet address: 02:35:9f:ef:1d:0b
epair75a: link state changed to UP
epair75b: link state changed to UP
epair75a: link state changed to DOWN
epair75b: link state changed to DOWN
passed [0.024s]
sys/net/if_gif:basic -> epair75a: Ethernet address: 02:ef:23:bc:f1:0a
epair75b: Ethernet address: 02:ef:23:bc:f1:0b
epair75a: link state changed to UP
epair75b: link state changed to UP
gif0: link state changed to UP
gif0: link state changed to UP
epair75a: link state changed to DOWN
epair75b: link state changed to DOWN
passed [0.183s]
sys/net/if_lagg_test:create -> tap0: Ethernet address: 58:9c:fc:00:1a:23
tap1: Ethernet address: 58:9c:fc:10:b9:37
lagg0: link state changed to DOWN
lock order reversal:
1st 0xffffffff81fa0180 in_control (in_control, sx) @ /usr/src/sys/netinet/in.c:316
2nd 0xfffff80006b46a28 if_lagg sx (if_lagg sx, sx) @ /usr/src/sys/net/if_lagg.c:1259
lock order in_control -> if_lagg sx attempted at:
#0 0xffffffff80c5ab4d at witness_checkorder+0xbfd
#1 0xffffffff80bf3b63 at _sx_xlock+0x63
#2 0xffffffff82917b3e at lagg_init+0x2e
#3 0xffffffff80d1d62e at ether_ioctl+0x1be
#4 0xffffffff80da8d72 at in_control+0x9c2
#5 0xffffffff80d17914 at ifioctl+0x7f4
#6 0xffffffff80c608b2 at kern_ioctl+0x202
#7 0xffffffff80c605fa at sys_ioctl+0x12a
#8 0xffffffff810c58b6 at amd64_syscall+0x6a6
#9 0xffffffff8109827b at fast_syscall_common+0xf8
lock order reversal:
1st 0xffffffff81fa0200 in_multi_sx (in_multi_sx, sx) @ /usr/src/sys/netinet/in_mcast.c:1206
2nd 0xfffff80006b46a28 if_lagg sx (if_lagg sx, sx) @ /usr/src/sys/net/if_lagg.c:1676
lock order in_multi_sx -> if_lagg sx attempted at:
#0 0xffffffff80c5ab4d at witness_checkorder+0xbfd
#1 0xffffffff80bf3b63 at _sx_xlock+0x63
#2 0xffffffff82917d54 at lagg_ioctl+0xd4
#3 0xffffffff80d16d5e at if_addmulti+0x2be
#4 0xffffffff80dae7bb at in_joingroup_locked+0x27b
#5 0xffffffff80dae512 at in_joingroup+0x42
#6 0xffffffff80da8db7 at in_control+0xa07
#7 0xffffffff80d17914 at ifioctl+0x7f4
#8 0xffffffff80c608b2 at kern_ioctl+0x202
#9 0xffffffff80c605fa at sys_ioctl+0x12a
#10 0xffffffff810c58b6 at amd64_syscall+0x6a6
#11 0xffffffff8109827b at fast_syscall_common+0xf8
passed [0.123s]
sys/net/if_lagg_test:create_destroy_stress -> skipped: Skipping this test because it easily panics the machine [0.019s]
sys/net/if_lagg_test:lacp_linkstate_destroy_stress -> skipped: https://bugs.freebsd.org/244168 [0.019s]
sys/net/if_lagg_test:set_ether -> tap0: Ethernet address: 58:9c:fc:00:1a:23
tap1: Ethernet address: 58:9c:fc:10:b9:37
lagg0: link state changed to DOWN
passed [0.066s]
sys/net/if_lagg_test:status_stress -> skipped: Skipping this test because it panics the machine fairly often [0.019s]
sys/net/if_lagg_test:up_destroy_stress -> skipped: Skipping this test because it panics the machine fairly often [0.019s]
sys/net/if_lagg_test:updown -> tap0: Ethernet address: 58:9c:fc:00:1a:23
tap1: Ethernet address: 58:9c:fc:10:b9:37
lagg0: link state changed to DOWN
expected_failure: PR 226144 Upping a lagg interrface should automatically up its children: atf-check failed; see the output of the test for details [0.058s]
sys/net/if_lagg_test:witness -> skipped: https://bugs.freebsd.org/244163 and https://bugs.freebsd.org/251726 [0.016s]
sys/net/if_stf:6rd -> epair75a: Ethernet address: 02:fb:d4:c5:e3:0a
epair75b: Ethernet address: 02:fb:d4:c5:e3:0b
epair75a: link state changed to UP
epair75b: link state changed to UP
lo0: link state changed to UP
gif0: link state changed to UP
lo0: link state changed to UP
epair75a: link state changed to DOWN
epair75b: link state changed to DOWN
passed [0.174s]
sys/net/if_stf:6rd_peer -> epair75a: Ethernet address: 02:e1:b5:3a:18:0a
epair75b: Ethernet address: 02:e1:b5:3a:18:0b
epair75a: link state changed to UP
epair75b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair75a: link state changed to DOWN
epair75b: link state changed to DOWN
passed [0.240s]
sys/net/if_stf:6to4 -> epair75a: Ethernet address: 02:8c:82:20:08:0a
epair75b: Ethernet address: 02:8c:82:20:08:0b
epair75a: link state changed to UP
epair75b: link state changed to UP
lo0: link state changed to UP
gif0: link state changed to UP
lo0: link state changed to UP
Fatal trap 9: general protection fault while in kernel mode
cpuid = 0; apic id = 00
instruction pointer = 0x20:0xffffffff80ba405e
stack pointer = 0x0:0xfffffe00e6100e70
frame pointer = 0x0:0xfffffe00e6100ef0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1:)
trap number = 9
panic: general protection fault
cpuid = 0
time = 1657454277
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00e6100c90
vpanic() at vpanic+0x151/frame 0xfffffe00e6100ce0
panic() at panic+0x43/frame 0xfffffe00e6100d40
trap_fatal() at trap_fatal+0x387/frame 0xfffffe00e6100da0
calltrap() at calltrap+0x8/frame 0xfffffe00e6100da0
--- trap 0x9, rip = 0xffffffff80ba405e, rsp = 0xfffffe00e6100e70, rbp = 0xfffffe00e6100ef0 ---
ithread_loop() at ithread_loop+0x3be/frame 0xfffffe00e6100ef0
fork_exit() at fork_exit+0x80/frame 0xfffffe00e6100f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00e6100f30
--- trap 0x5fb00f90, rip = 0, rsp = 0, rbp = 0x12d45fb00ea8 ---
KDB: enter: panic
[ thread pid 12 tid 102913 ]
Stopped at kdb_enter+0x32: movq $0,0x12a2833(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 0
dynamic pcpu = 0x9c4f00
curthread = 0xfffffe010248c560: pid 12 tid 102913 critnest 1 "swi1:"
curpcb = 0xfffffe010248ca70
fpcurthread = none
idlethread = 0xfffffe001122c3a0: tid 100003 "idle: cpu0"
self = 0xffffffff82610000
curpmap = 0xffffffff81e8dab8
tssp = 0xffffffff82610384
rsp0 = 0xfffffe00e6101000
kcr3 = 0x8000000002568002
ucr3 = 0xffffffffffffffff
scr3 = 0xbbbd4e77
gs32p = 0xffffffff82610404
ldt = 0xffffffff82610444
tss = 0xffffffff82610434
curvnet = 0
spin locks held:
db:0:kdb.enter.panic> reset
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-21590' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./run.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins3920471505272770035.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'da4e1e319c6cdaa1c6b3b44d8523e660a5e77e10', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../da4e1e319c6cdaa1c6b3b44d8523e660a5e77e10/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address