FreeBSD-main-amd64-test - Build #20503 - Still Failing
Date: Fri, 28 Jan 2022 15:05:54 UTC
FreeBSD-main-amd64-test - Build #20503 (4bd030b36991a317d257f01f2808a335b3a903fb) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20503/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20503/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20503/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
4bd030b36991a317d257f01f2808a335b3a903fb by gbe:
sctp(4): Fix a typo in an INVARIANTS panic message
The end of the build log:
[...truncated 3.88 MB...]
epair1a: Ethernet address: 02:74:eb:9d:0b:0a
epair1b: Ethernet address: 02:74:eb:9d:0b:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:35:29:ca:34:0a
epair2b: Ethernet address: 02:35:29:ca:34:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:ca:9f:23:19:0a
epair3b: Ethernet address: 02:ca:9f:23:19:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed [0.686s]
sys/netpfil/common/dummynet:ipfw_interface_removal -> epair0a: Ethernet address: 02:43:70:2c:21:0a
epair0b: Ethernet address: 02:43:70:2c:21:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [7.387s]
sys/netpfil/common/dummynet:ipfw_pipe -> epair0a: Ethernet address: 02:24:33:13:f3:0a
epair0b: Ethernet address: 02:24:33:13:f3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [27.531s]
sys/netpfil/common/dummynet:ipfw_pipe_v6 -> epair0a: Ethernet address: 02:23:59:a8:08:0a
epair0b: Ethernet address: 02:23:59:a8:08:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [25.508s]
sys/netpfil/common/dummynet:ipfw_queue -> epair0a: Ethernet address: 02:2b:8a:22:97:0a
epair0b: Ethernet address: 02:2b:8a:22:97:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 233 to 200 packets/sec
Limiting icmp ping response from 268 to 200 packets/sec
Limiting icmp ping response from 286 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 253 to 200 packets/sec
Limiting icmp ping response from 259 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting closed port RST response from 6606 to 200 packets/sec
Limiting icmp ping response from 256 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 267 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 256 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [18.370s]
sys/netpfil/common/dummynet:ipfw_queue_v6 -> epair0a: Ethernet address: 02:54:b6:be:a0:0a
epair0b: Ethernet address: 02:54:b6:be:a0:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [14.097s]
sys/netpfil/common/dummynet:pf_interface_removal -> epair0a: Ethernet address: 02:cb:15:54:cb:0a
epair0b: Ethernet address: 02:cb:15:54:cb:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [5.943s]
sys/netpfil/common/dummynet:pf_nat -> epair0a: Ethernet address: 02:89:6b:be:08:0a
epair0b: Ethernet address: 02:89:6b:be:08:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:4f:b0:65:56:0a
epair1b: Ethernet address: 02:4f:b0:65:56:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [0.827s]
sys/netpfil/common/dummynet:pf_pipe -> epair0a: Ethernet address: 02:cc:80:4a:11:0a
epair0b: Ethernet address: 02:cc:80:4a:11:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [24.830s]
sys/netpfil/common/dummynet:pf_pipe_v6 -> epair0a: Ethernet address: 02:1d:2c:64:e2:0a
epair0b: Ethernet address: 02:1d:2c:64:e2:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [22.578s]
sys/netpfil/common/dummynet:pf_queue -> epair0a: Ethernet address: 02:31:f8:f9:e4:0a
epair0b: Ethernet address: 02:31:f8:f9:e4:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 237 to 200 packets/sec
Limiting icmp ping response from 219 to 200 packets/sec
Limiting icmp ping response from 287 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 270 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 259 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 258 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 256 to 200 packets/sec
Limiting icmp ping response from 256 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 250 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 253 to 200 packets/sec
Limiting icmp ping response from 252 to 200 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [18.043s]
sys/netpfil/common/dummynet:pf_queue_v6 -> epair0a: Ethernet address: 02:10:31:71:f1:0a
epair0b: Ethernet address: 02:10:31:71:f1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x10
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e2ac3f
stack pointer = 0x28:0xfffffe00cf395c40
frame pointer = 0x28:0xfffffe00cf395d10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (dummynet)
trap number = 12
panic: page fault
cpuid = 1
time = 1643382352
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00cf395a00
vpanic() at vpanic+0x17f/frame 0xfffffe00cf395a50
panic() at panic+0x43/frame 0xfffffe00cf395ab0
trap_fatal() at trap_fatal+0x385/frame 0xfffffe00cf395b10
trap_pfault() at trap_pfault+0xab/frame 0xfffffe00cf395b70
calltrap() at calltrap+0x8/frame 0xfffffe00cf395b70
--- trap 0xc, rip = 0xffffffff80e2ac3f, rsp = 0xfffffe00cf395c40, rbp = 0xfffffe00cf395d10 ---
ip6_input() at ip6_input+0x4f/frame 0xfffffe00cf395d10
netisr_dispatch_src() at netisr_dispatch_src+0xaf/frame 0xfffffe00cf395d70
dummynet_send() at dummynet_send+0x1dd/frame 0xfffffe00cf395db0
dummynet_task() at dummynet_task+0x36d/frame 0xfffffe00cf395e40
taskqueue_run_locked() at taskqueue_run_locked+0xaa/frame 0xfffffe00cf395ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xc2/frame 0xfffffe00cf395ef0
fork_exit() at fork_exit+0x80/frame 0xfffffe00cf395f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00cf395f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 100104 ]
Stopped at kdb_enter+0x37: movq $0,0x1283a3e(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 1
dynamic pcpu = 0xfffffe008f59b600
curthread = 0xfffffe00987f8900: pid 0 tid 100104 critnest 1 "dummynet"
curpcb = 0xfffffe00987f8e10
fpcurthread = none
idlethread = 0xfffffe001122ec80: tid 100004 "idle: cpu1"
self = 0xffffffff82411000
curpmap = 0xffffffff81e8c258
tssp = 0xffffffff82411384
rsp0 = 0xfffffe00cf396000
kcr3 = 0x8000000002363002
ucr3 = 0xffffffffffffffff
scr3 = 0x17be38a29
gs32p = 0xffffffff82411404
ldt = 0xffffffff82411444
tss = 0xffffffff82411434
curvnet = 0xfffff800a04bc780
spin locks held:
db:0:kdb.enter.panic> reset
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-20503' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./run-kyua.sh
x ./run.sh
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins827572909740274600.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '4bd030b36991a317d257f01f2808a335b3a903fb', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../4bd030b36991a317d257f01f2808a335b3a903fb/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address