FreeBSD-main-amd64-test - Build #20501 - Still Failing
Date: Fri, 28 Jan 2022 12:25:46 UTC
FreeBSD-main-amd64-test - Build #20501 (f95498601547f7aeb76426fb3282b51ceb59eb6f) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20501/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20501/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20501/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
dd8ca6b27f69f841ab2e0f1424fe766034469205 by bapt:
distextract: simply code by using strsep(3)
f95498601547f7aeb76426fb3282b51ceb59eb6f by bapt:
disextract: eliminate last use of __DECONST
The end of the build log:
[...truncated 3.93 MB...]
epair0b: Ethernet address: 02:cc:b8:14:44:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ba:19:0c:e7:0a
epair1b: Ethernet address: 02:ba:19:0c:e7:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:d9:4f:3e:22:0a
epair2b: Ethernet address: 02:d9:4f:3e:22:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:21:54:65:94:0a
epair3b: Ethernet address: 02:21:54:65:94:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed [0.521s]
sys/netpfil/common/dummynet:ipfw_interface_removal -> epair0a: Ethernet address: 02:2e:b9:3e:ff:0a
epair0b: Ethernet address: 02:2e:b9:3e:ff:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [7.410s]
sys/netpfil/common/dummynet:ipfw_pipe -> epair0a: Ethernet address: 02:a3:dc:29:d6:0a
epair0b: Ethernet address: 02:a3:dc:29:d6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [27.663s]
sys/netpfil/common/dummynet:ipfw_pipe_v6 -> epair0a: Ethernet address: 02:e9:ef:5d:0d:0a
epair0b: Ethernet address: 02:e9:ef:5d:0d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [25.488s]
sys/netpfil/common/dummynet:ipfw_queue -> epair0a: Ethernet address: 02:19:c6:2a:79:0a
epair0b: Ethernet address: 02:19:c6:2a:79:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 237 to 200 packets/sec
Limiting icmp ping response from 270 to 200 packets/sec
Limiting icmp ping response from 298 to 200 packets/sec
Limiting icmp ping response from 271 to 200 packets/sec
Limiting icmp ping response from 269 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting closed port RST response from 7308 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 259 to 200 packets/sec
Limiting icmp ping response from 267 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 268 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 268 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 271 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [18.501s]
sys/netpfil/common/dummynet:ipfw_queue_v6 -> epair0a: Ethernet address: 02:45:5f:a3:a6:0a
epair0b: Ethernet address: 02:45:5f:a3:a6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [14.057s]
sys/netpfil/common/dummynet:pf_interface_removal -> epair0a: Ethernet address: 02:20:ea:27:36:0a
epair0b: Ethernet address: 02:20:ea:27:36:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [5.915s]
sys/netpfil/common/dummynet:pf_nat -> epair0a: Ethernet address: 02:9e:ec:ed:f2:0a
epair0b: Ethernet address: 02:9e:ec:ed:f2:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:d5:14:5b:77:0a
epair1b: Ethernet address: 02:d5:14:5b:77:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [0.981s]
sys/netpfil/common/dummynet:pf_pipe -> epair0a: Ethernet address: 02:7a:b9:c6:27:0a
epair0b: Ethernet address: 02:7a:b9:c6:27:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [24.743s]
sys/netpfil/common/dummynet:pf_pipe_v6 -> epair0a: Ethernet address: 02:1f:1b:c2:55:0a
epair0b: Ethernet address: 02:1f:1b:c2:55:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [22.609s]
sys/netpfil/common/dummynet:pf_queue -> epair0a: Ethernet address: 02:c8:76:06:ae:0a
epair0b: Ethernet address: 02:c8:76:06:ae:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 237 to 200 packets/sec
Limiting icmp ping response from 221 to 200 packets/sec
Limiting icmp ping response from 266 to 200 packets/sec
Limiting icmp ping response from 274 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 269 to 200 packets/sec
Limiting icmp ping response from 254 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 264 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 261 to 200 packets/sec
Limiting icmp ping response from 258 to 200 packets/sec
Limiting icmp ping response from 263 to 200 packets/sec
Limiting icmp ping response from 257 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 253 to 200 packets/sec
Limiting icmp ping response from 265 to 200 packets/sec
Limiting icmp ping response from 253 to 200 packets/sec
Limiting icmp ping response from 262 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [18.044s]
sys/netpfil/common/dummynet:pf_queue_v6 -> epair0a: Ethernet address: 02:87:96:50:5e:0a
epair0b: Ethernet address: 02:87:96:50:5e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x10
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80e2ac3f
stack pointer = 0x28:0xfffffe00983a9c40
frame pointer = 0x28:0xfffffe00983a9d10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (dummynet)
trap number = 12
panic: page fault
cpuid = 0
time = 1643372743
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00983a9a00
vpanic() at vpanic+0x17f/frame 0xfffffe00983a9a50
panic() at panic+0x43/frame 0xfffffe00983a9ab0
trap_fatal() at trap_fatal+0x385/frame 0xfffffe00983a9b10
trap_pfault() at trap_pfault+0xab/frame 0xfffffe00983a9b70
calltrap() at calltrap+0x8/frame 0xfffffe00983a9b70
--- trap 0xc, rip = 0xffffffff80e2ac3f, rsp = 0xfffffe00983a9c40, rbp = 0xfffffe00983a9d10 ---
ip6_input() at ip6_input+0x4f/frame 0xfffffe00983a9d10
netisr_dispatch_src() at netisr_dispatch_src+0xaf/frame 0xfffffe00983a9d70
dummynet_send() at dummynet_send+0x1dd/frame 0xfffffe00983a9db0
dummynet_task() at dummynet_task+0x36d/frame 0xfffffe00983a9e40
taskqueue_run_locked() at taskqueue_run_locked+0xaa/frame 0xfffffe00983a9ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xc2/frame 0xfffffe00983a9ef0
fork_exit() at fork_exit+0x80/frame 0xfffffe00983a9f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00983a9f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 100105 ]
Stopped at kdb_enter+0x37: movq $0,0x1283a3e(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 0
dynamic pcpu = 0x7c1600
curthread = 0xfffffe00c741c740: pid 0 tid 100105 critnest 1 "dummynet"
curpcb = 0xfffffe00c741cc50
fpcurthread = none
idlethread = 0xfffffe001122f3a0: tid 100003 "idle: cpu0"
self = 0xffffffff82410000
curpmap = 0xffffffff81e8c258
tssp = 0xffffffff82410384
rsp0 = 0xfffffe00983aa000
kcr3 = 0x8000000002363003
ucr3 = 0xffffffffffffffff
scr3 = 0x35091f6e
gs32p = 0xffffffff82410404
ldt = 0xffffffff82410444
tss = 0xffffffff82410434
curvnet = 0xfffff80011839400
spin locks held:
db:0:kdb.enter.panic> reset
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-20501' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins4634711062941572769.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'f95498601547f7aeb76426fb3282b51ceb59eb6f', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../f95498601547f7aeb76426fb3282b51ceb59eb6f/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address