FreeBSD-main-amd64-test - Build #21159 - Failure
Date: Fri, 15 Apr 2022 23:44:45 UTC
FreeBSD-main-amd64-test - Build #21159 (0fd4cd405bbf6b9dcc3d4fc3ddf37c876ba97c11) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21159/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21159/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21159/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
11d64c1d53b0376acf2e746e2744dd5f1a2fa492 by jkim:
acpica: Drop a local patch in favor of an upstream patch
e66c1b51850cbe5e2b02a13131dfce83a0c9a121 by imp:
nvme: Define NVME_MPS_SHIFT
a7218e7a6b05557c9ce60f8db33c06c97da72641 by imp:
nvme: Fix old intel alignment size
6e3deec8caab01a4de2bb446f8c5e799ed864562 by imp:
nvme: Base maximum data transfer size directly on MPSMIN in cap_hi
55412ef90ad1b03ea8124af7537307a49f52fab3 by imp:
nvme: Rename min_page_size to page_size and save mps
3a468f2010627cfb10fddab88eecbda66f4ee2ca by imp:
nvme: Use saved mps when initializing drive
3086efe895d5e7656c8a1a5343adf6de7c716b4d by imp:
nvme: Remove NVME_MAX_XFER_SIZE, replace inline calculation
3740a8db13ba62e47b82e312966194acc84ce0b6 by imp:
nvme: Further refinements in Host Memory Buffer Sizing
c5ed67dc90c233074693a753060f15641afacf5f by imp:
nvme: Prefer nvme_printf to printf when reporting formatting error
0fd4cd405bbf6b9dcc3d4fc3ddf37c876ba97c11 by imp:
nvme: Use controller's page size instead of PAGE_SIZE to create qpair
The end of the build log:
[...truncated 3.97 MB...]
epair0a: link state changed to UP
epair0b: link state changed to UP
nd6_setmtu0: new link MTU on epair0b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair0a (200) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [11.287s]
sys/netpfil/common/fragments:pf_fragments -> epair0a: Ethernet address: 02:a5:64:c3:50:0a
epair0b: Ethernet address: 02:a5:64:c3:50:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
nd6_setmtu0: new link MTU on epair0b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair0a (200) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [11.333s]
sys/netpfil/common/nat:ipfnat_basic -> epair0a: Ethernet address: 02:6b:21:21:e3:0a
epair0b: Ethernet address: 02:6b:21:21:e3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ce:2c:e0:a9:0a
epair1b: Ethernet address: 02:ce:2c:e0:a9:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:59:2e:79:f4:0a
epair2b: Ethernet address: 02:59:2e:79:f4:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed [2.356s]
sys/netpfil/common/nat:ipfw_basic -> epair0a: Ethernet address: 02:e4:dc:c3:3c:0a
epair0b: Ethernet address: 02:e4:dc:c3:3c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:2a:55:3d:1b:0a
epair1b: Ethernet address: 02:2a:55:3d:1b:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:fb:10:48:a2:0a
epair2b: Ethernet address: 02:fb:10:48:a2:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed [2.575s]
sys/netpfil/common/nat:ipfw_cgn -> epair0a: Ethernet address: 02:7d:68:ad:00:0a
epair0b: Ethernet address: 02:7d:68:ad:00:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:62:5d:e0:ee:0a
epair1b: Ethernet address: 02:62:5d:e0:ee:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:5c:2b:ce:2a:0a
epair2b: Ethernet address: 02:5c:2b:ce:2a:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed [2.352s]
sys/netpfil/common/nat:ipfw_portalias -> epair0a: Ethernet address: 02:5f:12:78:cb:0a
epair0b: Ethernet address: 02:5f:12:78:cb:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ae:c7:81:06:0a
epair1b: Ethernet address: 02:ae:c7:81:06:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:a7:11:ea:38:0a
epair2b: Ethernet address: 02:a7:11:ea:38:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed [2.349s]
sys/netpfil/common/nat:ipfw_userspace_nat -> epair0a: Ethernet address: 02:25:71:9b:81:0a
epair0b: Ethernet address: 02:25:71:9b:81:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:3c:48:e8:c4:0a
epair1b: Ethernet address: 02:3c:48:e8:c4:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:cb:1e:7b:f1:0a
epair2b: Ethernet address: 02:cb:1e:7b:f1:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
2022-04-15T23:44:25.741539+00:00 - natd 47152 - - Aliasing to 198.51.100.1, mtu 1500 bytes
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed [2.352s]
sys/netpfil/common/nat:pf_basic -> epair0a: Ethernet address: 02:87:ba:7e:1e:0a
epair0b: Ethernet address: 02:87:ba:7e:1e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:dd:2e:c4:63:0a
epair1b: Ethernet address: 02:dd:2e:c4:63:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:2c:4a:b3:4a:0a
epair2b: Ethernet address: 02:2c:4a:b3:4a:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed [2.424s]
sys/netpfil/common/pass_block:ipf_v4 -> epair0a: Ethernet address: 02:8f:90:59:68:0a
epair0b: Ethernet address: 02:8f:90:59:68:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [1.157s]
sys/netpfil/common/pass_block:ipf_v6 -> epair0a: Ethernet address: 02:b6:32:df:59:0a
epair0b: Ethernet address: 02:b6:32:df:59:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [2.137s]
sys/netpfil/common/pass_block:ipfw_v4 -> epair0a: Ethernet address: 02:5e:a0:14:e4:0a
epair0b: Ethernet address: 02:5e:a0:14:e4:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [1.146s]
sys/netpfil/common/pass_block:ipfw_v6 -> epair0a: Ethernet address: 02:bf:21:e5:89:0a
epair0b: Ethernet address: 02:bf:21:e5:89:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Fatal trap 9: general protection fault while in kernel mode
cpuid = 1; apic id = 01
instruction pointer = 0x20:0xffffffff80bc905e
stack pointer = 0x28:0xfffffe00d323de70
frame pointer = 0x28:0xfffffe00d323def0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1:)
trap number = 9
panic: general protection fault
cpuid = 1
time = 1650066283
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00d323dc90
vpanic() at vpanic+0x17f/frame 0xfffffe00d323dce0
panic() at panic+0x43/frame 0xfffffe00d323dd40
trap_fatal() at trap_fatal+0x385/frame 0xfffffe00d323dda0
calltrap() at calltrap+0x8/frame 0xfffffe00d323dda0
--- trap 0x9, rip = 0xffffffff80bc905e, rsp = 0xfffffe00d323de70, rbp = 0xfffffe00d323def0 ---
ithread_loop() at ithread_loop+0x3be/frame 0xfffffe00d323def0
fork_exit() at fork_exit+0x80/frame 0xfffffe00d323df30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00d323df30
--- trap 0xa5a5a5a5, rip = 0xa5a5a5a5a5a5a5a5, rsp = 0xa5a5a5a5a5a5a5a5, rbp = 0xa5a5a5a5a5a5a5a5 ---
KDB: enter: panic
[ thread pid 12 tid 102163 ]
Stopped at kdb_enter+0x32: movq $0,0x127d0f3(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 1
dynamic pcpu = 0xfffffe008f59a180
curthread = 0xfffffe00d406a020: pid 12 tid 102163 critnest 1 "swi1:"
curpcb = 0xfffffe00d406a530
fpcurthread = none
idlethread = 0xfffffe001122ec80: tid 100004 "idle: cpu1"
self = 0xffffffff82411000
curpmap = 0xffffffff81e8d6f8
tssp = 0xffffffff82411384
rsp0 = 0xfffffe00d323e000
kcr3 = 0x8000000002367002
ucr3 = 0xffffffffffffffff
scr3 = 0x11d6fde7
gs32p = 0xffffffff82411404
ldt = 0xffffffff82411444
tss = 0xffffffff82411434
curvnet = 0
spin locks held:
db:0:kdb.enter.panic> reset
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-21159' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run.sh
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins2204248947788251677.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '0fd4cd405bbf6b9dcc3d4fc3ddf37c876ba97c11', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../0fd4cd405bbf6b9dcc3d4fc3ddf37c876ba97c11/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address