FreeBSD-main-amd64-test - Build #21070 - Failure
Date: Wed, 06 Apr 2022 08:33:42 UTC
FreeBSD-main-amd64-test - Build #21070 (40b97c41bc775b73ccafdb0d9e02cfd45deaa5f7) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21070/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21070/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21070/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
b5c60bb85bf3fbe6815454a54aba3d0f2845de80 by pho:
stress2: Added a write(2) fuzz test scenario
40b97c41bc775b73ccafdb0d9e02cfd45deaa5f7 by pho:
stress2: Add new write(2) test. Remove sctp.sh after problem fixed
The end of the build log:
[...truncated 4.17 MB...]
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [62.491s]
sys/netinet6/frag6/frag6_20:frag6_20 -> epair0a: Ethernet address: 02:ae:35:c1:75:0a
epair0b: Ethernet address: 02:ae:35:c1:75:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [136.238s]
sys/netipsec/tunnel/aes_cbc_128_hmac_sha1:v4 -> epair0a: Ethernet address: 02:35:d3:86:c7:0a
epair0b: Ethernet address: 02:35:d3:86:c7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ea:60:8e:33:0a
epair1b: Ethernet address: 02:ea:60:8e:33:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:17:a6:32:bc:0a
epair2b: Ethernet address: 02:17:a6:32:bc:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:3f:ea:5b:dd:0a
epair3b: Ethernet address: 02:3f:ea:5b:dd:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed [0.415s]
sys/netipsec/tunnel/aes_cbc_128_hmac_sha1:v6 -> epair0a: Ethernet address: 02:41:91:d6:38:0a
epair0b: Ethernet address: 02:41:91:d6:38:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:92:32:0a:88:0a
epair1b: Ethernet address: 02:92:32:0a:88:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:54:b1:95:42:0a
epair2b: Ethernet address: 02:54:b1:95:42:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:49:68:2b:15:0a
epair3b: Ethernet address: 02:49:68:2b:15:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed [0.550s]
sys/netipsec/tunnel/aes_cbc_256_hmac_sha2_256:v4 -> epair0a: Ethernet address: 02:0a:c0:c1:65:0a
epair0b: Ethernet address: 02:0a:c0:c1:65:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:0b:bc:62:89:0a
epair1b: Ethernet address: 02:0b:bc:62:89:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:e0:32:01:d4:0a
epair2b: Ethernet address: 02:e0:32:01:d4:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:b1:61:4b:45:0a
epair3b: Ethernet address: 02:b1:61:4b:45:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed [0.474s]
sys/netipsec/tunnel/aes_cbc_256_hmac_sha2_256:v6 -> epair0a: Ethernet address: 02:9b:26:e2:d9:0a
epair0b: Ethernet address: 02:9b:26:e2:d9:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:9d:a6:16:1f:0a
epair1b: Ethernet address: 02:9d:a6:16:1f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:07:73:2d:9f:0a
epair2b: Ethernet address: 02:07:73:2d:9f:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:40:56:d2:2e:0a
epair3b: Ethernet address: 02:40:56:d2:2e:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
passed [0.571s]
sys/netipsec/tunnel/aes_gcm_128:v4 -> epair0a: Ethernet address: 02:59:52:27:30:0a
epair0b: Ethernet address: 02:59:52:27:30:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:cd:f0:c4:01:0a
epair1b: Ethernet address: 02:cd:f0:c4:01:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:81:03:c7:29:0a
epair2b: Ethernet address: 02:81:03:c7:29:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: 02:77:7a:7c:ce:0a
epair3b: Ethernet address: 02:77:7a:7c:ce:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
Fatal trap 9: general protection fault while in kernel mode
cpuid = 1; apic id = 01
instruction pointer = 0x20:0xffffffff80bc811e
stack pointer = 0x28:0xfffffe00e4cfde70
frame pointer = 0x28:0xfffffe00e4cfdef0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1:)
trap number = 9
panic: general protection fault
cpuid = 1
time = 1649234020
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00e4cfdc90
vpanic() at vpanic+0x17f/frame 0xfffffe00e4cfdce0
panic() at panic+0x43/frame 0xfffffe00e4cfdd40
trap_fatal() at trap_fatal+0x385/frame 0xfffffe00e4cfdda0
calltrap() at calltrap+0x8/frame 0xfffffe00e4cfdda0
--- trap 0x9, rip = 0xffffffff80bc811e, rsp = 0xfffffe00e4cfde70, rbp = 0xfffffe00e4cfdef0 ---
ithread_loop() at ithread_loop+0x3be/frame 0xfffffe00e4cfdef0
fork_exit() at fork_exit+0x80/frame 0xfffffe00e4cfdf30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00e4cfdf30
--- trap 0xa5a5a5a5, rip = 0xa5a5a5a5a5a5a5a5, rsp = 0xa5a5a5a5a5a5a5a5, rbp = 0xa5a5a5a5a5a5a5a5 ---
KDB: enter: panic
[ thread pid 12 tid 103075 ]
Stopped at kdb_enter+0x37: movq $0,0x127e47e(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 1
dynamic pcpu = 0xfffffe008f59a180
curthread = 0xfffffe00f37fe020: pid 12 tid 103075 critnest 1 "swi1:"
curpcb = 0xfffffe00f37fe530
fpcurthread = none
idlethread = 0xfffffe001122ec80: tid 100004 "idle: cpu1"
self = 0xffffffff82411000
curpmap = 0xffffffff81e8d6b8
tssp = 0xffffffff82411384
rsp0 = 0xfffffe00e4cfe000
kcr3 = 0x8000000002366002
ucr3 = 0xffffffffffffffff
scr3 = 0xa0db6dea
gs32p = 0xffffffff82411404
ldt = 0xffffffff82411444
tss = 0xffffffff82411434
curvnet = 0
spin locks held:
db:0:kdb.enter.panic> reset
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-21070' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./run.sh
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins2115599245748015598.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '40b97c41bc775b73ccafdb0d9e02cfd45deaa5f7', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../40b97c41bc775b73ccafdb0d9e02cfd45deaa5f7/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address