[Bug 275655] sysutils/u-boot-rpi-arm64: 2023.10 doesn't find mmc0
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 09 Dec 2023 13:54:35 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=275655
Bug ID: 275655
Summary: sysutils/u-boot-rpi-arm64: 2023.10 doesn't find mmc0
Product: Ports & Packages
Version: Latest
Hardware: arm64
OS: Any
Status: New
Severity: Affects Only Me
Priority: ---
Component: Individual Port(s)
Assignee: uboot@FreeBSD.org
Reporter: freebsd@oldach.net
Flags: maintainer-feedback?(uboot@FreeBSD.org)
Assignee: uboot@FreeBSD.org
Since the recent port update to U-BOOT 2023.10, mmc0 is no longer found and my
RPi4/8G reverts to Ethernet boot (which fails below due to no link):
----------------------------------------------------------------------
U-Boot 2023.10 (Dec 09 2023 - 13:58:21 +0100)
DRAM: 948 MiB (effective 7.9 GiB)
RPI 4 Model B (0xd03114)
Core: 210 devices, 16 uclasses, devicetree: board
MMC: mmc@7e300000: 3, mmc@7e340000: 0
Loading Environment from FAT... ** Bad device specification mmc 1 **
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Net: eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
ethernet@7d580000 Waiting for PHY auto negotiation to complete......... TIMEOUT
!
bcmgenet: PHY startup failed: -110
ethernet@7d580000 Waiting for PHY auto negotiation to complete......... TIMEOUT
!
bcmgenet: PHY startup failed: -110
U-Boot>
----------------------------------------------------------------------
U-Boot 2023.07.02 works fine on the same machine:
----------------------------------------------------------------------
U-Boot 2023.07.02 (Aug 09 2023 - 18:56:25 +0200)
DRAM: 948 MiB (effective 7.9 GiB)
RPI 4 Model B (0xd03114)
Core: 209 devices, 16 uclasses, devicetree: board
MMC: mmc@7e300000: 3, mmc@7e340000: 0
Loading Environment from FAT... ** Bad device specification mmc 1 **
In: serial
Out: vidconsole
Err: vidconsole
Net: eth0: ethernet@7d580000
PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
No EFI system partition
No EFI system partition
Failed to persist EFI variables
BootOrder not defined
EFI boot manager: Cannot load any image
Found EFI removable media binary efi/boot/bootaa64.efi
1186852 bytes read in 86 ms (13.2 MiB/s)
Booting /efi\boot\bootaa64.efi
console comconsole failed to initialize
Consoles: EFI console
Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
----------------------------------------------------------------------
--
You are receiving this mail because:
You are the assignee for the bug.