[Bug 277062] FreeBSD 14.0-RELEASE installer unable to install on HPE ProLiant DL385 Gen10v2 and HPE ProLiant DL345 Gen11

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=277062

--- Comment #34 from Arrigo Triulzi <arrigo@alchemistowl.org> ---
(In reply to Arrigo Triulzi from comment #33)
Updated the machine with iLO 2.99 and BIOS 2.90_10_27 to iLO 3.01 and BIOS
3.00_01_26 and the behaviour is confirmed:

* will not boot a FreeBSD image of any version
* console does not work with repeated USB error messages

Captured the boot:

ivhd3: supported paging level:7, will use only: 4
ivhd3: device 10x8 - 0x3ffel config:0
ivhd3: device Laxff00 - 0xffff] config:0
ivhd3: PCI cap 0x190b640f@0x40 feature:19<101LB, EFR,CapExt>
Starting powerd.
Security policy loaded: MAC/ntpd (mac_ntpd)
Starting ntpd.
Mounting late filesystems:.
Starting sendmail_submit.
Starting sendmail_msp-queue.
Performing sanity check on ssho configuration.
Starting sshd.
Configuring vt: keymap blanktime.
Starting cron.
Starting background file system checks in 60 seconds.
* CITOIC] starting jails...
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed!
(USB_ERR_TIMEOUT, ignored)
+ Setting RCTL props + Setting RCTL props
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed!
(USB_ERR_TIMEOUT, ignored)
+ Setting RCTL props

Fri Feb 16 10:48:49 UTC 2024

FreeBSD/amd64 (ops-1) (ttyva)

login: usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed!
(USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at
addr 2 failed, ugen0.2: ‹Unknown › at usbus (disconnected)
lescriptor at addr 2 failed, USB ERE TIMEOUT
USB_ERR_TIMEOUT
uhub_reattach_port: could not allocate new device usb_alloc_device: set address
2 failed (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=2, set address failed!
(USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at
addr 2 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
[repeats continuously]

-- 
You are receiving this mail because:
You are the assignee for the bug.