FreeBSD-main-amd64-test - Build #20022 - Still Failing
Date: Tue, 07 Dec 2021 11:43:09 UTC
FreeBSD-main-amd64-test - Build #20022 (6f78736cb12026fcb423e1b313e83efb80597f21) - Still Failing
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20022/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20022/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/20022/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
6f78736cb12026fcb423e1b313e83efb80597f21 by ram:
ocs_fc: Remove unused function delarations.
The end of the build log:
[...truncated 4.14 MB...]
epair125a: link state changed to UP
epair125b: link state changed to UP
epair126a: Ethernet address: 02:bd:fd:11:66:0a
epair126b: Ethernet address: 02:bd:fd:11:66:0b
epair126a: link state changed to UP
epair126b: link state changed to UP
carp: demoted by 240 to 240 (pfsync bulk start)
epair124b: promiscuous mode enabled
epair125b: promiscuous mode enabled
epair126b: promiscuous mode enabled
epair126b: promiscuous mode disabled
carp: demoted by -240 to 0 (pfsync bulk done)
epair124b: promiscuous mode disabled
epair125b: promiscuous mode disabled
epair124b: link state changed to DOWN
epair124a: link state changed to DOWN
epair125b: link state changed to DOWN
epair125a: link state changed to DOWN
epair126b: link state changed to DOWN
epair126a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [4.575s]
sys/netpfil/pf/proxy:ftp -> skipped: Required program 'twistd' not found in PATH [0.006s]
sys/netpfil/pf/rdr:basic -> epair124a: Ethernet address: 02:2e:59:6e:0e:0a
epair124b: Ethernet address: 02:2e:59:6e:0e:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
epair124a: link state changed to DOWN
epair124b: link state changed to DOWN
passed [4.236s]
sys/netpfil/pf/ridentifier:basic -> epair124a: Ethernet address: 02:2c:41:b0:ea:0a
epair124b: Ethernet address: 02:2c:41:b0:ea:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
lo0: link state changed to UP
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
pflog0: promiscuous mode enabled
pflog0: promiscuous mode disabled
epair124a: link state changed to DOWN
epair124b: link state changed to DOWN
passed [5.322s]
sys/netpfil/pf/route_to:icmp_nat -> epair124a: Ethernet address: 02:ea:57:0b:86:0a
epair124b: Ethernet address: 02:ea:57:0b:86:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
epair125a: Ethernet address: 02:ae:86:85:b3:0a
epair125b: Ethernet address: 02:ae:86:85:b3:0b
epair125a: link state changed to UP
epair125b: link state changed to UP
epair126a: Ethernet address: 02:7e:fb:8f:7a:0a
epair126b: Ethernet address: 02:7e:fb:8f:7a:0b
epair126a: link state changed to UP
epair126b: link state changed to UP
nd6_setmtu0: new link MTU on epair126a (500) is too small for IPv6
nd6_setmtu0: new link MTU on epair126b (500) is too small for IPv6
epair124a: promiscuous mode enabled
epair124a: promiscuous mode disabled
epair124a: link state changed to DOWN
epair124b: link state changed to DOWN
passed [12.884s]
sys/netpfil/pf/route_to:multiwan -> epair124a: Ethernet address: 02:12:9b:bc:14:0a
epair124b: Ethernet address: 02:12:9b:bc:14:0b
epair124a: link state changed to UP
epair124b: link state changed to UP
epair127a: Ethernet address: 02:7c:00:81:6d:0a
epair127b: Ethernet address: 02:7c:00:81:6d:0b
epair127a: link state changed to UP
epair127b: link state changed to UP
epair128a: Ethernet address: 02:6b:93:eb:f7:0a
epair128b: Ethernet address: 02:6b:93:eb:f7:0b
epair128a: link state changed to UP
epair128b: link state changed to UP
epair129a: Ethernet address: 02:4b:dd:69:07:0a
epair129b: Ethernet address: 02:4b:dd:69:07:0b
epair129a: link state changed to UP
epair129b: link state changed to UP
lo0: link state changed to UP
passed [0.728s]
sys/netpfil/pf/route_to:multiwanlocal -> epair130a: Ethernet address: 02:37:2f:ff:b7:0a
epair130b: Ethernet address: 02:37:2f:ff:b7:0b
epair130a: link state changed to UP
epair130b: link state changed to UP
epair131a: Ethernet address: 02:56:dc:53:24:0a
epair131b: Ethernet address: 02:56:dc:53:24:0b
epair131a: link state changed to UP
epair131b: link state changed to UP
epair132a: Ethernet address: 02:e5:f5:f4:24:0a
epair132b: Ethernet address: 02:e5:f5:f4:24:0b
epair132a: link state changed to UP
epair132b: link state changed to UP
epair133a: Ethernet address: 02:5f:a2:61:17:0a
epair133b: Ethernet address: 02:5f:a2:61:17:0b
epair133a: link state changed to UP
epair133b: link state changed to UP
passed [3.000s]
sys/netpfil/pf/route_to:v4 -> epair134a: Ethernet address: 02:da:e7:aa:d4:0a
epair134b: Ethernet address: 02:da:e7:aa:d4:0b
epair134a: link state changed to UP
epair134b: link state changed to UP
epair135a: Ethernet address: 02:03:b3:5c:93:0a
epair135b: Ethernet address: 02:03:b3:5c:93:0b
epair135a: link state changed to UP
epair135b: link state changed to UP
epair134a: link state changed to DOWN
epair134b: link state changed to DOWN
epair135a: link state changed to DOWN
epair135b: link state changed to DOWN
passed [3.364s]
sys/netpfil/pf/route_to:v6 -> epair134a: Ethernet address: 02:d2:b9:ee:66:0a
epair134b: Ethernet address: 02:d2:b9:ee:66:0b
epair134a: link state changed to UP
epair134b: link state changed to UP
epair135a: Ethernet address: 02:85:7e:80:e4:0a
epair135b: Ethernet address: 02:85:7e:80:e4:0b
epair135a: link state changed to UP
epair135b: link state changed to UP
epair134a: link state changed to DOWN
epair134b: link state changed to DOWN
epair135a: link state changed to DOWN
epair135b: link state changed to DOWN
passed [3.323s]
sys/netpfil/pf/rules_counter:get_clear -> epair134a: Ethernet address: 02:7b:b3:ef:a2:0a
epair134b: Ethernet address: 02:7b:b3:ef:a2:0b
epair134a: link state changed to UP
epair134b: link state changed to UP
epair134a: link state changed to DOWN
epair134b: link state changed to DOWN
passed [2.338s]
sys/netpfil/pf/rules_counter:keepcounters -> epair134a: Ethernet address: 02:20:36:86:69:0a
epair134b: Ethernet address: 02:20:36:86:69:0b
epair134a: link state changed to UP
epair134b: link state changed to UP
epair134a: link state changed to DOWN
epair134b: link state changed to DOWN
passed [6.365s]
sys/netpfil/pf/set_skip:pr255852 -> epair134a: Ethernet address: 02:76:1f:f7:3d:0a
epair134b: Ethernet address: 02:76:1f:f7:3d:0b
epair134a: link state changed to UP
epair134b: link state changed to UP
lo0: link state changed to UP
epair134a: link state changed to DOWN
epair134b: link state changed to DOWN
passed [1.240s]
sys/netpfil/pf/set_skip:set_skip_dynamic -> epair134a: Ethernet address: 02:f8:0f:74:f8:0a
epair134b: Ethernet address: 02:f8:0f:74:f8:0b
epair134a: link state changed to UP
epair134b: link state changed to UP
epair134a: link state changed to DOWN
epair134b: link state changed to DOWN
passed [0.175s]
sys/netpfil/pf/set_skip:set_skip_group -> lo0: link state changed to UP
pid 752 (kyua), jid 0, uid 0, was killed: out of swap space
Killed
+ rc=137
+ set -e
+ [ 137 -ne 0 ]
+ [ 137 -ne 1 ]
+ exit 137
+ tar cvf /dev/vtbd1 -C /meta .
a .
a ./auto-shutdown
a ./run.sh
a ./disable-notyet-tests.sh
a ./run-kyua.sh
a ./disable-zfs-tests.sh
a ./disable-dtrace-tests.sh
+ [ -f /meta/auto-shutdown ]
+ uname -p
+ shutdown -p now
Shutdown NOW!
shutdown: [pid 47097]
+ echo .
.
+ _return=0
+ [ 0 -ne 0 ]
+ return 0
+ _run_rc_postcmd
+ [ -n '' ]
+ return 0
+ return 0
2021-12-07T11:42:44.779090+00:00 - shutdown 47097 - - power-down by root:
System shutdown time has arrived
pid 679 (auditd), jid 0, uid 0, was killed: out of swap space
carp: demoted by -240 to 0 (pfsync bulk fail)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
All buffers synced.
Uptime: 51m54s
lock order reversal:
1st 0xffffffff81f9dba0 cc_list (cc_list, rw) @ /usr/src/sys/netinet/cc/cc.c:245
2nd 0xffffffff81f9d420 vnet_rwlock (vnet_rwlock, rw) @ /usr/src/sys/netinet/cc/cc.c:208
lock order cc_list -> vnet_rwlock attempted at:
#0 0xffffffff80c6e59d at witness_checkorder+0xbdd
#1 0xffffffff80bf9142 at __rw_rlock_int+0x82
#2 0xffffffff80dd3913 at cc_deregister_algo+0x113
#3 0xffffffff80dd3eca at cc_modevent+0x1a
#4 0xffffffff80bd8f3b at module_shutdown+0x6b
#5 0xffffffff80bfddfe at kern_reboot+0x4de
#6 0xffffffff80bfd8c8 at sys_reboot+0x3a8
#7 0xffffffff810bdc94 at amd64_syscall+0x6b4
#8 0xffffffff8108ed2b at fast_syscall_common+0xf8
acpi0: Powering system off
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-20022' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./run.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins130813778442465605.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '6f78736cb12026fcb423e1b313e83efb80597f21', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../6f78736cb12026fcb423e1b313e83efb80597f21/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address